|
New Page 1
|
|
|
|
Spacelabs Healthcare Medical Parts List
|
| |
Spacelabs Healthcare Medical Parts List
View as PDF
Quick Reference for Spacelabs Medical Repair Parts
April 29, 2005
Important Information About Using This Spacelabs Medical Repair Parts
List:
1. This is the Monitoring Technical Support Department’s “most
requested parts” list for
Spacelabs Medical equipment. Note: This list is intended as a quick
reference to
complement the parts information in Spacelabs Service Manuals. It is
NOT a complete list
of all parts available for all supported equipment!
2. This list is not intended as a substitute for any other source of
parts information,
especially the appropriate Service Manual or Technical Manual for the
equipment being
repaired. Monitoring Technical Support can provide information for any
repair part you
require. Remember to verify information, and be alert for parts
compatibility issues.
3. The part numbers on this list are typically the latest part number
for that part. If the part
you are replacing has an earlier “dash number” than the one on the
list, order the matching
part number. For example, if you have a part that is labeled
670-1234-08, but the list says
670-1234-11, order a 670-1234-08. This will guarantee compatibility.
In some cases the
newer number may have replaced the old; if so, the Service Parts
Department will let you
know when ordering.
4. The leftmost column of the list (the REM (Remarks) column) is
marked in some places
with “OBS”. This indicates the part status is “obsolete” because the
product has been out
of production for more than seven (7) years. Spacelabs Medical must
limit support for
discontinued products due to a lack of readily available spare parts.
The part MAY still be
available; however, as is the recommendation in our industry, our
policy has been to
guarantee support coverage of our patient monitoring products for a
period of seven (7)
years following the last date of manufacture of a particular product.
Beyond the seven year
point, we move to a “best effort basis” for support, subject to the
availability of respective
spare parts. Therefore, it is possible that individual parts tagged as
“OBS” may become
unavailable for sale at any time. Parts marked as “Disc” are no longer
available, and are
listed for reference only.
5. This list will be updated regularly. Every effort has been made to
ensure that the part
numbers listed are current and available. However, part numbers and
availability are
subject to change. Spacelabs reserves the right to modify the Quick
Reference at any time.
Parts are offered subject to availability and shall be sold under the
then current Spacelabs
terms of sale at the prices established from time to time by the
Company.
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
Remote Nurse Alert
Nurse Alert (w ithout cable), for use with PCMS, Ultraview, and
Ultraview SL Monitors 685-0008-00
ELECTRONIC ASSEMBLIES:
PCB 670-0557-01
Lamp 150-0050-00
CHASSIS COMPONENTS:
Lens, Red, w/Diffuser 378-0048-00
Case (top and bottom included, label and lens not included)
380-0049-01
Label 334-0640-00
CABLES AND CONNECTORS:
Cable Assy, Remote Nurse Alert, UCW - 9 pin to 15 pin - ALSO NEED:
cable adapter 012-0397-00 012-0389-00
Cable Adapter, 9 pin to RJ-11 012-0397-00
Cable Assy, Remote Nurse Alert, PCMS Monitors (90303/311/312,
90305/15/16, 90308, and 90309).
PIN 1
PIN 6
012-0207-00
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
Cable to use Nurse Alert With Ultraview 1500 (90363), Ultraview 1030
(90367), and Ultraview 1050 (90369)
Monitors. Cable is RJ-9 to RJ-9, 8 foot.
012-0182-02
90205 Holter Recorder
90207 ABP Monitor
NOTE: See also separate section for the 90207-Q ABP Monitor
Service Manual Part Number: 070-0189-02
ELECTRONIC & PNEUMATIC ASSEMBLIES:
Module, Board Assy -Includes Main Board and Display Board listed
separately below. 672-0085-10
PCBA, Main Board, 90207 (for non-Q 90207 monitors). 670-0303-10
PCBA, Display Board, 90207 (for non-Q 90207 monitors). 670-0302-00
Pump Assy 119-0060-05
Contact, Battery 131-1218-00
Lithium Battery 146-0008-00
Cover, Lithium Battery 200-0064-02
Holder, Lithium Battery 352-0039-00
Solenoid Valve 214-0128-00
Reed Switch 260-0036-00
Transducer 117-0006-00
Manifold Assy 650-0041-00
Fitting, Female, Luer, Heavy Duty 214-0141-00
Valve, Air, 4.0v, 85 Ohm 214-0128-00
CHASSIS COMPONENTS:
Case Body 437-0028-03
Case Cover 437-0027-02
Case, Battery Cover 437-0029-01
Panel, Switch, Start, LCD Window, Spacelabs (U.S.) 333-0134-03
Panel, Switch, Start, LCD Window, Spacelabs (International Symbols)
333-0134-01
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
Bracket, Pump Mounting 388-0195-02
Cushion, Motor/Pump 348-0064-00
Cover, Switch Plate 200-0081-00
Spring, Single/Conical Battery 214-0122-00
Spring, Single/Flat Battery 214-0126-01
Spring, Battery, Normal Double 214-0129-02
Spring, Battery, Reverse Double 214-0125-02
Cover, Lithium Battery 200-0064-02
Panel, Switch, Start, LCD Window 333-0134-03
LABELS:
Communication Label, English 334-0251-XX
Label, Overlay, Ident Serial Num 334-0264-01
Label, Ident, Serial Number, English 334-7326-05
Label, Operating Instruction, English, 90207 334-1284-00
Label, Screw Cover, 90207 334-1285-00
CABLES, CONNECTORS, AND ACCESSORIES:
Cable Assy, Serial, Direct Connect -cable used to connect 90207
monitor to computer 012-0097-02
Pouch, Cloth, 90207, with SLM Logo 016-0410-00
90207-Q ABP Monitor
NOTE: See separate section for the 90207 ABP Monitor if your monitor
is not a 90207-Q.
Service Manual Part Number: 070-0189-04
LABELS:
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
Label, Ident, Serial Number (same part number for all languages)
334-0922-00
Label, Communications, 90207, English
..................................................................................................
Label, Communications, 90207, German
.................................................................................................
Label, Communications, 90207, French
..................................................................................................
Label, Communications, 90207, Italian
.....................................................................................................
Label, Communications, 90207, Spanish
.................................................................................................
Label, Communications, 90207, Portuguese
...........................................................................................
Label, Communications, 90207, Dutch
....................................................................................................
Label, Communications, 90207, Finnish
..................................................................................................
Label, Communications, 90207, Danish
...................................................................................................
334-0251-XX
334-0322-04
334-0320-03
334-5607-00
334-5599-00
334-5647-00
334-5751-00
334-5771-00
334-5761-00
Label, Operating Instruction, 90207, English
.............................................................................................
Label, Operating Instruction, 90207, German
............................................................................................
Label, Operating Instruction, 90207, French
.............................................................................................
Label, Operating Instruction, 90207, Italian
................................................................................................
Label, Operating Instruction, 90207, Spanish
............................................................................................
Label, Operating Instruction, 90207, Portuguese
......................................................................................
Label, Operating Instruction, 90207, Dutch
...............................................................................................
Label, Operating Instruction, 90207, Finnish
.............................................................................................
Label, Operating Instruction, 90207, Danish
..............................................................................................
334-1284-00
334-1281-00
334-1282-00
334-5609-00
334-5601-00
334-5649-00
334-5755-00
334-5775-00
334-5765-00
Label, Screw Cover, 90207 ,
English.........................................................................................................
Label, Screw Cover, 90207, German
........................................................................................................
Label, Screw Cover, 90207, French
.........................................................................................................
Label, Screw Cover, 90207, Italian
...........................................................................................................
Label, Screw Cover, 90207, Spanish
.......................................................................................................
Label, Screw Cover, 90207, Portuguese
..................................................................................................
Label, Screw Cover, 90207, Dutch
...........................................................................................................
Label, Screw Cover, 90207, Finnish
.........................................................................................................
Label, Screw Cover, 90207, Danish
.........................................................................................................
334-1285-00
334-1286-00
334-1283-00
334-5608-00
334-5600-00
334-5648-00
334-5756-00
334-5776-00
334-5766-00
GENERIC 90207-Q PARTS:
ELECTRONIC & PNEUMATIC ASSEMBLIES:
Module, Board Assy, 90207 - Includes Main Board and Display Board .
672-0085-11
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
PCBA, Aux, 90207 670-1295-00
Battery, Lithium, 3v 146-0008-00
Manifold Assy, 90207 650-0041-01
Pump Assy, 3v, 3700 Rpm 119-0060-05
Contact, Battery, Locking, 90207 131-1218-01
Wire Harness, JST, 1.5 mm, 2.0" 175-1595-00
Spring, Single/Conical Battery 214-0122-00
Spring, Battery, Reverse Double 214-0125-02
Spring, Single/Flat Battery 214-0126-01
Spring, Battery, Normal Double 214-0129-02
Panel, Front 90207, Membrane Switch, Intl 333-0158-01
Fitting, Hose Barb To 8-32 Male, 90207 214-1025-00
Fitting, M Bayonet To 8-32 Female, 90207 214-1021-01
Tubing, Silicone, .104 ID, .192 OD
255-000400A
Tubing, Silicone, .078 ID, .125 OD 166-0007-00
Tubing 1/16 In Tygon 384303-002
O-Ring, .100x.020, Buna 70 348-0619-00
Filter, Luer, 90207 378-0045-01
CHASSIS COMPONENTS:
Cover, Case 437-0027-02
Case, Body, 90207 437-0028-04
Case, Battery Cover, 90207 437-0029-01
Plug, Latch Recess 134-0017-01
Cover, Lithium Battery 200-0064-02
Cushion, Motor/Pump, 90207 348-0064-00
Cushion, Motor Mount, 90207 348-0066-00
Bracket, Pump Mounting 407-0099-01
Cover, Switch Plate 200-0081-00
CABLES, CONNECTORS, AND ACCESSORIES:
Cable Assy, Serial, Direct Connect - cable used to connect 90207
monitor to computer 012-0097-02
Pouch, Cloth, 90207, with SLM Logo 016-0410-00
90208 Holter Recorder
For Support Call Burdick (Quinton) at (800) 777-1777
90217 ABP Monitor
NOTE: See separate section for the 90217-Q ABP Monitor
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
Service Manual Part Number: 070-0502-00 Rev E
ELECTRONIC & PNEUMATIC ASSEMBLIES:
Assembly, ECB, 90217 672-0171-01
Assy, Alarm, Piezo, W/Conn & Mount 119-0231-00
Contact, Battery, 90217 (to replace all, order two of these)
131-0987-00
Contact, Battery, Single, 90217 (to replace all, order two of these)
131-1054-00
Internal 3v Lithium Battery 146-0043-00
Pump Assy, 3v, 3700 RPM, St Shaft 119-0060-05
Cushion, Pump, Bottom, 90217 348-0210-00
Gasket, Sealing 348-0196-00
Manifold Assy, 90217 650-0399-01
Valve, Air, 3.8v, 140 Ohms 214-0404-00
Tubing, Silicone, .104 ID, .192 OD 255-0004-00A
Tubing 1/16 In Tygon 384303-002
CABLES AND ACCESSORIES:
Cable Assy, Serial, Direct Connect -cable used to connect 90217
monitor to computer 012-0097-03
Calibration Kit, ABP Includes 214-0061-00 (Fitting, Female Luer To
Male Luer), 214-0261-00 (Fitting,
1/8” Hose, Male Luer), 214-0354-00 (Fitting, Plug, 1/8" Male Luer),
And 214-0063-00 (Fitting, Luer Lock Ring)
016-0040-00
CHASSIS COMPONENTS:
Insulator, Battery (to replace all, order three of these) 342-0108-00
Shield, ESD, 90217 337-0176-00
Case, Bottom/Rear, 90217 437-0086-00
Case, Door, Battery Cover, 90217 437-0087-00
Case, Top/Front, 90217 437-0088-00
90217-Q ABP Monitor
NOTE: See separate section for the 90217 ABP Monitor if your monitor
is not a 90217-Q.
Service Manual Part Number: 070-0502-00 Rev. F
LABELS:
Label, Front Panel, 90217 Multi (same part number for all languages)
334-1098-00
Label, Ident, Serial Number (same part number for all languages)
334-0922-00
Label, CE Mark, 0.75"X0.5", with Numbers (same part number for all
languages) 334-1595-00
Domestic English
Label, Communications
............................................................................................................................
Label, Operating Instructions
...................................................................................................................
334-0828-00
334-0829-00
International English
Label, Communications
............................................................................................................................
Label, Operating Instructions
...................................................................................................................
334-0828-00
334-0829-00
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
French
Label, Communications
............................................................................................................................
Label, Operating Instructions
...................................................................................................................
334-1112-00
334-1107-00
German
Label, Communications
............................................................................................................................
Label, Operating Instructions
...................................................................................................................
334-1111-00
334-1106-00
Spanish
Label, Communications
............................................................................................................................
Label, Operating Instructions
...................................................................................................................
334-1109-00
334-1104-00
Italian
Label, Communications
............................................................................................................................
Label, Operating Instructions
...................................................................................................................
334-1110-00
334-1105-00
Dutch
Label, Communications
............................................................................................................................
Label, Operating Instructions
.....................................................................................................................
334-5752-00
334-5753-00
Finnish
Label, Communications
............................................................................................................................
Label, Operating Instructions
...................................................................................................................
334-5772-00
334-5773-00
Danish
Label, Communications
............................................................................................................................
Label, Operating Instructions
...................................................................................................................
334-5762-00
334-5763-00
Portuguese
Label, Communications
............................................................................................................................
Label, Operating Instructions
...................................................................................................................
334-5651-00
334-5652-00
ELECTRONIC & PNEUMATIC ASSEMBLIES:
Assembly, ECB, 90217 672-0171-01
Manifold Kit, (for Q-Option) 050-0110-01
Pump Assy, 3v, 3700 Rpm, St Shaft 119-0060-05
Cushion, Pump, Bottom, 90217 348-0210-00
Cushion, Motor Mount, 90207 348-0066-00
Internal 3v Lithium Battery 146-0043-00
Assy, Alarm, Piezo, W/Conn & Mount Ring 119-0231-00
Contact, Battery 131-0987-00
Contact, Battery, Single 131-1054-00
Insulator, Battery 342-0108-00
Shield, ESD, 90217 337-0176-00
Valve, Air, 3.8v, 140 Ohms 214-0404-00
Tubing, Silicone, .104 Id, .192 OD 255-0004-00a
Tubing 1/16 In Tygon 384303-002
CHASSIS COMPONENTS:
Case, Bottom/Rear 437-0086-00
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
Case, Door, Battery Cover 437-0087-00
Case, Top/Front, 90217 437-0088-00
Gasket, Sealing 348-0196-00
Pouch, Cloth, 90217 016-0340-00
90239A ABP Report Generator
Service Manual Part Number: 070-0398-00
ELECTRONIC ASSEMBLIES:
Main Board (PCB Assy, Device Interface, 90239A) 670-0703-xx
Printer Assy 119-0185-00
Power Supply 119-0189-00
Membrane Switch 333-0311-00
Panel, Membrane Switch, 90239A 333-0311-00
CHASSIS COMPONENTS:
Case Bottom 437-0078-00
Case Top 437-0079-01
Printer Cover 200-0152-01
Window, IR, 90239 331-0021-00
Magnet 214-0311-00
Foot, Cab, Self Sticking 348-0502-00
Menu Label 334-0734-01
Printer Label (Label, Warning, Printer Paper) 334-0874-00
Label, Ident, 90239A, Report Generator 334-0873-00
Label, Ident, Serial Number 334-7326-05
Label, Overlay, Ident Serial Number 334-0264-01
PC1 90303 / 90311 / 90312
90303 Options
-04 = Analog Output Board
-05 = Dual Serial Board
-06 = Terminal Emulation
-07 = RS-232 Interface
-08 = Six Traces
-10 = Tabular Trends, Physiological and Drug
Dose Calculations
List:
-12 = Remote Access Capability
-13 = Three Trace
-14 = Four Trace
-20 = Data Shuttle (with 90470 or 90496 Modules)
-26 = Patient Data Logger
-51 = Bedside Chart
90311 = 5 Trace Central Monitor
90312 = 10 Trace Central Monitor
90303 Service Manual Part Number: 890303-001
90303A Service Manual Part Number: 070-0061-00
90303B Service Manual Part Number: 070-0061-02
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
Note About 90303 CPU Identification: The terms “Target” and
“Pre-Target” refer to the group of PC1 CPU
Boards built with pin-thru components. The more recent “Pauline” style
CPU is built with surface mount
components. Always replace a CPU by ordering the same part number
found on the board assembly that
you are replacing.
ELECTRONIC ASSEMBLIES:
CPU Part Number for very old CPU version – Replaced By 306794-003 –
listed for reference only 306141-005
CPU Drawer Assy - Pre-Target, 8 MHz 306794-003
CPU Drawer Assy - Pre-Target, 10 MHz 306794-006
CPU Drawer Assy - Target, Slow - 90303 / 90311 436-0003-00
CPU Drawer Assy - Target, Slow - 90303 / 90311 (equivalent to
436-0003-00 Target CPU with the 0400811-
00 Memory Upgrade Kit installed). NOTE: Memory Upgrades are ONLY
required for Y2K software
versions V3.55.50 and V3.55.51
436-0003-06
CPU Drawer Assy - Target, Fast - 90303-08 / 90312 (10 Zone)
436-0003-04
CPU Drawer Assy - Target, Fast - (10 Zone) (equivalent to 436-0003-04
Target CPU Assemblies with the
040-0811-00 Memory Upgrade Kit installed). NOTE: Memory Upgrades are
ONLY required for Y2K software
versions V3.55.50 and V3.55.51
436-0003-07
Target RAM Update (Required For Year 2000 software 3.55.50 and
3.55.51EN. Also needed to use Target
PC1’s with 90492 12-Lead ECG module and the 90480 EEG module, plus
minimum software version 3.55.xx)
040-0811-00
CPU Drawer Assy – “Pauline” CPU 436-0009-02
ROM Pack - Target -find the correct part number on ROM Pack label.
306835-xxx
ROM Pack - Pauline CPU, with Flash ROM’s - find the correct part
number on ROM Pack label. 672-1000-xx
Touchscreen Bezel Assy , U.S. Softkey Label 306752-002
Touchscreen Bezel Assy , International Softkey Label 306752-003
Backplane PCBA For A/B Monitors 670-0349-01
Backplane PCBA For Non-A/B Monitors 306250-004
Fusister on Backplane Board (4 ea) - for 12v, acts as a fuse
(Resistor, 4.3 Ohm, 5%, .25W) 370020-439
Display Controller / Z-Axis (25 MHz, 90303/311 A/B) 308160-001
Display Controller / Z-Axis (26 MHz, 90312/303-08 A/B) 308160-002
X/Y Deflection Heatsink Assembly, Alpha PC - for Non-A Monitors With
Power Supply 119-0040-00
(replaces 119-0177-01) -power transistors included
306285-002
X/Y Deflection Board - non-A Monitors - power transistors not included
306585-001
X/Y Deflection Heatsink Assy - A/B Monitors - includes 306585-001 X/Y
Deflection board & power
transistors, plus hardware
306289-001
X/Y Deflection Board - A/B Monitors - power transistors not included
(May Use part number 306289-001
above)
306585-001
Power transistors for X/Y Deflection:
XSTR, NPN, 2N6338, 120V, 25A, TO-3, Q22 (bottom)
..................................... 376000-202
XSTR, PNP, 2N6438, 120V, 25A, TO-3, Q21 (top)
........................................... 376000-146
XSTR, PNP, 2N6437 (Replaced By 2N6438, above)
........................................ 376000-148
Insulator, TO-3, Thermal Conductive
................................................................
342-0030-00
High Voltage Power Supply (HVPS) 366109-002
Cancellation Coil PCBA - used in some 90303B’s - mounted between Power
Supply and HVPS. with
connector / cable to the CRT yoke. Eliminates CRT noise.
670-0473-00
CRT (Recommend customer should also order 306698-001 Dust Exclusion
Seal) 362112-001
CRT Socket Board (Plugs Into Back Of CRT) 306705-002
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
CRT Yoke (Yoke, Deflection, Alpha PC) 384367-001
CRT Filter (a.k.a. implosion shield) - does not include Hardkey Label
306722-101
Fan - A/B Monitors 650-0423-00
Fan - Non-A/B Monitors 306618-003
Speaker 384379-001
Lithium Battery 384322-001
12v Battery 384225-002
AC Switch ( Replaces 308230-003 ) -JUST THE SWITCH - ORDER THE
040-0651-00 KIT BELOW UNLESS
YOU ARE REPLACING THIS EXACT SWITCH.
670-0411-01
Kit, AC Switch Replacement - Required to install the 670-0411-01
switch (above) in PC1’s with ANY older
case style.
040-0651-00
Filter, Power Line (includes AC power connector for power cord)
378-0013-01
POWER SUPPLIES:
Power Supply - Old - “Non-A” PC1, with Slidebar Switch, has fan
306295-003
Power Supply - Two Standing PCBs, with Slidebar Switch (One-Way
Compatible with 306299-002) 306299-001
Power Supply - Two Standing PCBs, with Wired Switch (CSR Sub
119-0040-00) 306299-002
Power Supply - One Standing PCB, 4 Potentiometers 119-0040-00/ 01
* AC Misc. Board for use with 119-0040-00, -01, or -03 Power Supply
(above). 306910-004
Power Supply PCBA Assy, Analog Front End (use part number that matches
existing board) - the -001 is
the version with 4 pots, used in the 119-0040-00, -01, or -03 Power
Supply (above).
308105-001
Power Supply - One Standing PCB, One Potentiometer 119-0040-12
* AC Misc. Board for use with 119-0040-12 Power Supply (above)
306910-004
Power Supply PCBA, PC1 – single pot version, used in the 119-0040-12
Power Supply (above). 670-0620-02 / 04
CHASSIS COMPONENTS:
Divider, Module Cage 426-0034-01
Door, Module Cage 202-0014-01
Screwlock Assy, Female, Zinc Plated, Steel 129-0001-00A
Label, Hard Key, English 334-0803-00
Label, PC1 Fascia, Gray, English 334-0162-01
Air Filter 306952-001
12v Battery Bracket (Battery Tray) 306802-001
Fuse Cover (Shield) 337-0071-01
Beryllium - Copper Fingers, Clip On found on top of module cage.
214-0266-00
CABLES AND CONNECTORS:
Cable Assy, Power Supply To CPU 175-0345-00
Cable Assy, Power Supply To Battery 175-0372-00
Cable Assy, CPU To Speaker 306622-001
Cable Assy, Alarm Relay, Alpha PC 306684-003
Power Supply Adapter Cable, Old Non-A Power Switch to New Power Supply
175-0455-00
Power Supply Adapter Cable, Wired Power Switch to Old Power Supply
175-0456-00
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
OBS
PC2 90305/90315/90316
90305
-01 = 16 Trace Central (90316 only)
-02 = PC Mode / Network Access
-03 = I/O Board
-04 = Eight Traces
-06 = Terminal Emulation
-07 = Patient Data Logger
-08 = Bedside Chart
-09 = Remote Slave Display Driver Board
Options List:
-10 = Local Calcs & Tabular Trends
-15 = Configurable Remote Display
-16 = PC Data Master
-20 = Data Shuttle (with 90470 or 90496 Module)
-77 = Ultraview Compatible with Repeater Display
-78 = Ultraview Compatible with Configurable Remote
Display
• 90315 = 6 Trace Central Monitor, 8 traces optional
• 90316 = 12 Trace Central Monitor, 16 traces optional (Option -01)
90315 / 90316
-01 = 8 Trace (90315) or 16 Trace (90316)
-03 = I/O Board
-06 = Terminal Emulation
Options List:
-07 = Patient Data Logger
-09 = Repeater Display
-12 = Remote Calcs & Tabular Trends
OBS Service Manual Part Number: 070-0235-02
ELECTRONIC ASSEMBLIES:
OBS PCBA, CPU - With Piggyback Memory Board (Slow CPU) (NOTE:
Piggyback RAM Boards: 1 Row of chips =
1 MB, 2 rows = 2 MB). Piggyback Memory Board is Not Included - order
separately.
670-0306-03
OBS PCBA, CPU - w/o Piggyback Memory Board (Fast CPU, also known as
CPU+) 670-0506-03
OBS Piggyback Memory Board with 1 MB - has one row of 8 memory chips
(J561 on CPU jumpered 2-3) 670-0345-01
OBS Piggyback Memory Board with 2 MB - has two rows of 8 memory chips
(J561 on CPU jumpered 1-2) 670-0345-02
OBS ROMPack, Slow - for Slow CPU (replaces 670-0305-00) 650-0121-10
OBS ROMPack, Fast - for Fast CPU (replaces 670-0709-00) 650-0314-10
OBS Mother Board 670-0308-02
OBS Display Controller, 10 waveform, for 90305 / 90315 (One-Way
Compatible with 670-0562-32) 670-0271-21
OBS Display Controller, 10 waveform, for 90305 / 90315 (Replaces
670-0562-31). Supports Ultraview option
upgrade kit, which adds hardware to this specific PCBA.
670-0562-32
NOTE: The 670-0271-01 or 670-0562-12 Display Controllers, below, (plus
minimum software 3.67.04) are
required to use the 90492 12-Lead Module in Split-View mode.
OBS Display Controller, 16 waveform, 90316 (One-Way Compatible with
670-0562-12, replaces 670-0271-00) 670-0271-01
OBS Display Controller, 16 waveform, for 90316, supports the Ultraview
option 670-0562-12
OBS RGB Cable Bracket Assembly. Contains: 670-0417-01 (PCB Assy, RGB
Video Buffer) , 407-0238-00
(Bracket, Slave Repeater, RGB Con), plus fasteners
650-0122-02
OBS PCB Assy, RGB Video Buffer, 90305 670-0417-01
DISC RGB Display - Mitsubishi Display - REPLACED BY 650-0454-00, DATA
RAY 650-0118-10
OBS RGB Display - Data Ray Display 650-0454-00
OBS Touchscreen Bezel Assy (Do Not order the -01 version). Includes
Hardkey Label with U.S. Symbols. 650-0111-11
OBS Power Supply 650-0108-02
OBS Power switch on Power Supply (SW2, 250V, 6A) 260-0050-00
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
OBS Power Supply Fan (Fan Assy, 12 VDC, 4 cfm) 119-0111-00
OBS Cable, Power Interconnect (PS to Motherboard, for +12v, +5v, two
rows of pins ) 175-0566-00
OBS Battery, 8 volt, Rechargeable 146-0014-00
OBS Battery Tray for 8 volt battery 050-0080-00
OBS Lithium Battery 384322-001
OBS Fan assembly with cable 175-0557-00
OBS Fan only 384383-002
OBS Speaker (with bracket & cable) 119-0132-10
OBS Speaker (just the speaker) 119-0014-00
OBS Fuse, 5A, Main 159-5026-00
OBS Fuse, 7A, Power Supply 159-0024-00
OBS Fuse, 1A, Power Supply 380101-010
OBS Fuse, .25A, Power Supply F1 / F2 159-5042-00
OBS Fuse .5A Power Supply F4 / F5 159-0004-00
OBS Pico Fuse, 4A, 125v, Axial Lead - Mother Board to SDLC +12v
159-0048-00
OBS Fuse, 1.5A, CPU, SDLC/12/Ethernet 380101-016
OBS Fuse, 2A Mother Board to IRTS / Keyboard 159-0208-00
CHASSIS COMPONENTS:
OBS Air Filter 650-0075-00
OBS AC Switch Push Rod Assy, 90305 (Includes Front Panel Pushbutton)
650-0102-01
OBS Pushbutton, Main Switch 362114-001
OBS Front Bezel, With No IRTS Boards 650-0111-20
OBS Panel, Decorative (blank panel to left of display) - needs
Fastener Inserts, below 333-0155-01
OBS Fastener Insert, Round Head, 5/16" Diameter (remember to order
two). 377-0004-00
OBS Glare/Implosion Shield (Needs Hardkey Label separately)
337-0116-01
OBS Hard Key Label, U.S. Symbols, for Light Gray Bezel (Early
Monitors) 334-0278-00
OBS Hard Key Label, U.S. Symbols, for Dark Gray Bezel (Later Monitors)
334-0278-01
OBS Hard Key Label – International Symbols 334-0477-02
OBS Blank Cover, Disk Drive Bay 333-0152-01
CABLES, CONNECTORS, AND ACCESSORIES:
OBS Cable, Touchscreen 175-0490-01
OBS Cable, Power Supply to Battery 175-0372-00
OBS
PC Express 90308
90308
-09 = Alarm Relay Output
-11 = Two Additional Batteries
-14 = Four Trace
Options List:
-15 = Communications (Ethernet) Option
-17 = Memory Recorder
-20 = Data Shuttle (with 90470 or 90496 Module)
IMPORTANT! FOR ALL CIRCUIT BOARDS EXCEPT POWER SUPPLY, CHECK THE 90308
COMPATIBILITY MATRIX IN THE SERVICE MANUAL.
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
Service Manual Part Number: 070-0254-02
ELECTRONIC ASSEMBLIES:
OBS IRTS (Infrared Touchscreen) - improved version (Kit, PC Express,
Touchscreen Upgrade) Contains the
670-0461-12 IRTS PCBA and Install Instruction. IMPORTANT NOTE: To
replace the 90308 touchscreen, the
670-0447-03 or higher (-03, -04, or -05) Display Controller Board is
required. Make sure the monitor has this
version - if not, it must also be replaced with the 670-0447-05 when
replacing the touchscreen. Also, note
that the 670-0447-03 or higher Display Controller Board must be used
with the 670-0462-03 Waveform
Controller Board.
040-0698-00
OBS CPU Board -Original Version ( 90308 with s/n < 308013356 )
670-0424-02
OBS Display/Touchscreen Controller -Original Version 670-0447-01
OBS Waveform Controller -Original Version 670-0462-00
OBS CPU Board -Full International Version (90308 with s/n 308A04941
and up ) 670-0424-03/04
OBS Display/Touchscreen Controller -Full International Version
670-0447-05
OBS Waveform Controller -Full International Version 670-0462-03
OBS Display, EL, 640 X 400 Pixels, Flat – OBSOLETE, NO LONGER
AVAILABLE, FOR REFERENCE ONLY 150-0028-00/02
OBS Bezel Assy Kit - with display and IRTS– OBSOLETE, LISTED FOR
REFERENCE ONLY 650-0141-00
OBS Bezel Assy Kit - without display – OBSOLETE, LISTED FOR REFERENCE
ONLY – If customer needs only the
Bezel and IRTS, order separate parts.
650-0141-10
OBS Power Supply 670-0448-05
OBS Module SDLC Connectors on Power Supply Board (Conn, D-Sub, Female,
15 Pin, 0.5" Pins) 354640-015
OBS Ethernet Board 670-0423-03
OBS Battery Board 670-0449-02
OBS Front Panel Power Switch (on Battery Board) 260-0061-00
OBS PCB Assy, Display Controller Interface – Narrow Board With No
Holes - Retaining Clips Grip Board From
Sides
670-0468-00
OBS PCB Assy, Display Controller Interface – Wider Board With Holes
For Retaining Clips 670-0468-03
OBS PCB Assy, Display Controller Interface – Wider Board With Holes
For Retaining Clips – CONNECTORS
OFFSET
670-0468-04
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
OBS Display, EL, 640x400 Pixels (Display only) – NOTE: If customer has
the one-piece display bracket with
rectangular cutout, May Also Need To Order newer revision of
386-0165-00, Support, Display, 90308, or the
display may short to the old bracket.
REPLACE THIS BRACKET …………………..… THIS BRACKET IS OK
150-0028-02
OBS Fan without Cable - Original Version (larger fan) 119-0115-00
OBS Fan with Cable - Original Version (larger fan) 175-0622-00
OBS Fan, 60 mm without Cable (Full International) 119-0120-00
OBS Fan, 60 mm with Cable (Full International) 175-0771-10
OBS Connector Board - SDLC Connector Only 670-0421-01
OBS Connector Board - All Connectors: Ethernet, HLO, RS-232, Ext.
Alarm 670-0421-14
OBS Speaker, PCB Mount 119-0069-00
OBS Lithium Battery 384322-001
OBS 12-Volt Battery 146-0018-00
OBS AC Input Line Filter (This is the short, compact AC input found on
newer 90308’s) * Customer may also
want the 175-0617-00 (Cable Assy, AC Input To P.S.)
119-0116-01
OBS AC Input Line Filter (This is the long, taller AC input found on
older 90308’s) 119-0172-01
OBS External Battery Charger Unit (for Scout or Express batteries) -
Order thru Spacelabs Sales Rep. 010-1114-00
CHASSIS COMPONENTS:
OBS Bezel, 90308 203-0034-02
OBS Filter, Display (clear plastic display screen cover) - Hardkey
label not included 378-0035-03
OBS Hard Key Label 334-0455-03
OBS Gray Switch Cap - On/Off Switch On Front Panel 201-0003-01
OBS Bracket, Speaker Mount 119-0114-10
OBS Battery Latch (black plastic part that holds the battery in - one
needed for each battery slot) 105-0021-00
OBS Battery Door Latch (round black twist latch that holds battery
door closed) 105-0022-00
OBS Top Cover Assy, new EMI version (with carrying handle & fan)
650-0274-11
OBS Top Cover Only, new EMI version 200-0171-00
OBS Main Chassis, 90308 (Bottom Of Monitor Housing) 441-0050-04
OBS Rear Panel With Ethernet (multiple connectors) 333-0260-02
OBS SDLC-only Rear Panel 333-0332-01
OBS Air Filter 378-0037-01
OBS Retainer, Power Cord (Holds power cord on - does NOT block power
switch) 343-0062-01
OBS Bracket, Power Cord, 90308 (Holds power cord on - DOES block power
switch) 407-0245-00
CABLES AND CONNECTORS:
OBS Power Cord, Domestic, 120V, 10A, 18 AWG, 10' 161-0032-00
OBS Cable Assy, IR Touchscreen To Controller 175-0618-00
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
OBS Pad, Foam, IR, Narrow 348-0071-01
PC Scout / Ranger 90309 / 90309-W
90309 Options
-A = Dual Channel Recorder
-B = SDLC and Remote Alarm
-C = SDLC, Remote Alarm, and Internal Flexport
Interface
-D = Fourth Waveform Zone
-E = Data Shuttle (with 90470 or 90496 Module)
-F = Internal Flexport Only
-K = LCD (Liquid Crystal) Display
-L = EL (Electroluminescent) Display
List:
-M = Wired Ethernet, SDLC, Alarm, Flexport Interface
-N = Local Graphic and Tabular Trends
-P = Interactive Networking
-Q = Mainstream Capnography
-R = Patient Data Logger
-S = Hardwired Ethernet Option for Wireless
-T = Bed to Bed Communication (non-interactive)
-W = Wireless Ethernet, Wired Ethernet, SDLC,
Alarm, Flexport Interface
Service Manual Part Number: 070-0438-03
IMPORTANT! FOR ALL DISPLAYS:
Make sure you know which type of Display you are replacing -EL (Option
L) OR LCD (Option K).
CHECK THE 90309 COMPATIBILITY MATRIX.
DISPLAYS AND TOUCHSCREEN / BEZEL ASSEMBLIES:
EL Display / Bracket Kit (includes Sharp EL Display, Extended Display
Mount Bracket, Main Board To EL
Display Cable Assy, and install instructions).
050-0084-00
EL Bezel / IRTS PCB Kit (Extended Bezel) - Includes Switch Cap, Switch
Gasket, Air Filter, Extended Bezel,
and International Hardkey Label. Includes IRTS PN 670-0655-06.
050-0085-00
Sharp LCD Display / Bracket Kit - Includes 150-0082-00-X (Refurbished
Display, LCD, Monochrome,
VGA), 407-0360-00 (Bracket, Display Mount, Ex tended LCD), 175-0957-00
(Cable Assy, Main Board to LCD
Display), 075-0067-00 (Instructions, Install, Sharp LCD Display,
90309), And 077-0007-00 (Note, CS, Scout
LCD Replacement Kits)
050-0102-00-X
Sharp LCD Bezel / IRTS PCB Kit. (The Sharp LCD display uses a deeper
bezel than the old (obsolete) Seiko
LCD).
050-0103-00
Display / Bracket Kit, for Seiko LCD (original version)) (For Scouts
With Serial Numbers <309-003367) –
LISTED FOR REFERENCE ONLY – SEIKO DISPLAY IS OBSOLETE AND NOT
AVAILABLE. REPLACEMENT
WITH SHARP LCD MAY REQUIRE UPDATE TO MAIN BOARD AND/OR IO BAY BOARD,
PLUS 050-0103-00
EXTENDED BEZEL / IRTS PCB Kit. See 077-0007-00 (Customer Service Note,
Scout LCD Replacement Kits)
(050-0061-00)
If New Main Board Needed For Upgrade from Seiko LCD To Sharp LCD:
Order KIT, SVC, 90309 -11
CPU W/SHARP LCD - Includes 670-0621-11 Main Board. NOTE: costs
customer less than buying 6700621-
11 alone. Does NOT include the Sharp LCD, order separately.
050-0105-00
TO REPLACE AN LCD DISPLAY WITH AN EL DISPLAY, DO THIS:
1. Is the existing Main Board a 670-0621-05 or below (not compatible
with the EL Display)? IF YES, need to
order a 670-0621-06, and note that the 670-0621-07 or higher is NOT
compatible with the I/O Board found in
Scouts with the -06 or previous Main Boards. IF NO, confirm that the
existing Main Board is a 670-0621-06
or above, which are compatible with the EL Display with no update
needed.
2. Order two kits: 050-0084-00 and 050-0085-00 (listed below) and also
a new label 334-1029-00 (Label,
Model #, Serial #, SL Medical) to mark the updated Scout as having
Option -L (EL Display).
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
EL Display / Bracket Kit (includes Planar EL Display, Main Board To EL
Display Cable Assy, Brightness
Control Cable Assy, and install instructions. NOTE: The Planar EL
Display works with the -08 Main Board, but
requires the -11 Main Board to enable the brightness feature.
NOTE: LISTED FOR REFERENCE ONLY. THE PLANAR DISPLAY KIT IS OBSOLETE
(as of October 2004).
ALL SCOUT EL DISPLAY REPLACEMENTS MUST USE THE 050-0084-00 DISPLAY
KIT.
(050-0130-00)
EL Bezel Sub-Assy, Front, Extended - Part Of 050-0085-00 Kit, Above
614-0053-00
¨ Cable Assy, Main Board To El Display, for use with Planar EL
Displays 175-0985-00
¨ Cable Assy, Main Board To El Display, for use with Sharp EL Displays
175-0883-00
ELECTRONIC ASSEMBLIES:
Main Board - See Compatibility Matrix in Service Manual. (Note: the
-11 version is required for the Planar EL
Display Brightness Control feature to work)
670-0621-11
Touchscreen / Bezel Replacement Kit, (Kit, Bezel / IRTS PCB, LCD) for
Seiko LCD (Old original version) 050-0060-00
7 Amp SMD Fuse for Main Board 159-0085-00
Front Bezel Power Indicator LED 150-0058-00
NOTE- I/O Board Compatibility:
-05 I/O Boards can be used with 670-0621-05 & -06 main boards only.
-06 and -07 I/O Boards can be used with 670-0621-07 or later main
boards only.
-08 I/O Boards can be used with 670-0621-11 or later main boards.
I/O Board, SDLC Only - (move Flash ROM U610 from old board)
670-0623-05
I/O Board, Ethernet - (move Flash ROM U610 from old board) 670-0623-07
I/O Bay PCB Assy, Ethernet / RS232: The -08 version is required for
the patient data logger option (plus s/w
3.68.15 or higher). Does not have the U610 Flash ROM chip or its
socket.
670-0623-08
Interconnect Board and Frame Assy Kit. NOTE: Interconnect Board is NOT
available separately. 050-0062-00
15-Pin SDLC connector on interconnect board 354640-015
Frame Assembly Replacement Kit (Internal aluminum chassis -Includes
Internal Fan) - Includes: 426-0041-00
(Frame, Contact), 131-0887-00 (Contact, Battery), and 119-0186-01
(Fan, 40 mm, 12V)
050-0144-00
New Quiet Fan for Scout – Fan Only (Fan, 40 mm, 12v) 119-0186-01
Recorder Option Upgrade Kit – For Scouts or Rangers without a recorder
-Order as an upgrade from your
Spacelabs Sales Representative.
040-0768-00
Recorder Replacement Kit - with Label - contains PN 119-0191-02
(Module, Hot Dot Recorder).
NOTE: Identifying Like-For-Like Recorder Part Numbers: For any
90309/90367/90369 monitor recorder
replacement, the customer MUST check the General Scanning (GSI) part
number on the recorder module
being replaced. The GSI part number is found on a silver label on the
recorder. If the recorder module being
replaced is labeled with GSI part number 600-06008-02, order
119-0191-00 (Module, Hot Dot Recorder,
Custom), NOT this 050-0064-01 kit. If the GSI part number is
600-06008-03, order this recorder replacement
kit (PN 050-0064-01). This counts as a like-for-like exchange.
050-0064-01
Kit, Roller, Internal Recorder (includes drive roller and side gear).
Note: The Roller kit 050-0388-00 will only
fit in GSI part number 600-06008-03 recorder modules. It will not fit
in the GSI part number 600-06008-02. If
a customer has the older 600-06008--02 GSI part number they must order
the new kit Door/Roller 050-038900
(below) which will fit both the older and newer GSI recorders.
050-0388-00
Kit, Door/Roller, Internal Recorder (includes door with paper holder,
drive roller, and side gear) 050-0389-00
Recorder CPU (RCU) - Move the EPROM from old board to empty socket on
new part. (Note: screw for RCU
board = 211-0240-00)
670-0624-05
Speaker, 2.5" Diameter, 8 Ohm, 0.3W 384379-001
Battery, Lithium 384322-001
Battery, Main (Sealed Lead-Acid, 12V, 2.3 AH) 146-0018-00
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
Battery Charger - charges up to four Scout, Express, or 90367/90369
Lead-Acid Batteries -NOT for use
with NiMH batteries, Lead-Acid ONLY. Order from Spacelabs Sales
Representative.
010-1114-00
EXTERNAL DC POWER SUPPLIES:
New Ault Power Supply - usable with all 90309 Scouts, REQUIRED for
Capnography (Option -Q) 119-0251-01
Original Style External Power Supply, 110v - may substitute Ault Power
Supply 119-0251-01 650-0379-00
Original Style External Power Supply, 220v - may substitute Ault Power
Supply 119-0251-01 650-0391-00
Power Supply PCBA for 650-0379-00 Original Style Scout Power Supply
119-0206-00
Fan for 650-0379-00 Original Style Scout Power Supply (new quieter
fan) 175-0841-01
AC Power Cord Input Connector (Power Entry Module) for 650-0379-00
Original Style Scout Power Supply
- NOT FOR THE 119-0251-01 AULT POWER SUPPLY.
119-0205-00
AC Power Cord Retainer Bracket For Original Style Scout Power Supply -
NOT FOR THE 119-0251-01 AULT
Power Supply.
407-0287-02
Bottom Enclosure for 650-0379-00 Original Style Scout Power Supply
(650-0379-00) 437-0082-00
Top Enclosure for 650-0379-00 Original Style Scout Power Supply
(650-0379-00) 437-0083-01
DC Cable, for 650-0379-00 Original Style Scout Power Supply To Monitor
– Listed for reference only,
replaced By 012-0505-00, Below
012-0348-00
DC Cable With Strain Relief, for 650-0379-00 Original Style Scout
Power Supply To Monitor - NOT FOR THE
119-0251-01 AULT Power Supply.
012-0505-00
DC Cable With Strain Relief, For the 119-0251-01 Ault Power Supply
010-1427-00
12v Auto Adapter Cable Kit, 90309/69 040-0986-01
CHASSIS COMPONENTS:
Monitor Connector Alignment Service Kit (KIT, RETROFIT, MONITOR,
CONNECTOR). For use in
90309/90367/90369, and 94000 MOM monitors ONLY. Reduces the
possibility of module connector damage
due to misalignment when a module is rapidly inserted into the
monitor. Each kit contains parts to retrofit 5
monitors. NOTE: Contains alignment shims and related hardware, but
does NOT include parts to repair any
existing connector damage.
040-1480-00
Kit, Replacement, 90309 Rear Cover – Kit With Anti-Rotation Plate for
New DC Cable w/Strain Relief -
Includes 650-0277-00 (Assy, Housing, Rear), All Labels, and
Instructions. DOES NOT include battery door;
order separately if needed.
050-0137-00
Front Bezel Sub-Assy for Seiko LCD (Original LCD no longer available)
-Note: Front Bezel only is not
available. Order the 050-0060-00 Service Kit listed under Electronic
Assemblies, above.
See Note
Front Bezel Sub-Assy for Sharp LCD (New), Deeper Bezel (Front Bezel
Only - Part Of The 050-0103-00
Service Kit listed above). Does not include Hardkey Label or Switch
Cap (see below).
614-0055-00
Front Bezel Sub-Assy for EL Display - Front Bezel Only -Part Of The
050-0085-00 Service Kit listed
above. Does not include Hardkey Label or Switch Cap (see below).
614-0053-00
Hardkey Label, U.S. Symbols 334-2108-00
Hardkey Label, International Symbols 334-0790-01
Switch Cap for front bezel power switch 201-0011-00
Switch Gasket for front bezel power switch 348-0148-00
Air Filter 378-0073-00
Air Filter for Extended Bezel 378-0096-00
Air Filter, For Old Style Scout Power Supply 378-0505-00
Latch, Battery (battery retaining latch) 105-0037-00
Blank Cover for Recorder Bay, for units without the optional internal
recorder. Also may need: Bracket
(407-0270-00), Screw, (211-0217-00), and Washer (210-0851-00).
134-0032-01
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
Battery Door 202-0020-00
Latch, Battery Door 105-0038-00
Battery Door Latch Spring 214-0333-01
Battery Spring, 90309/90369 214-0518-00
Ejector, Battery (plastic part on spring that pulls the battery out)
214-0317-01
Label, DC Input 334-0935-00
Label, Warning, Service (Triangular Shock Symbol) 334-1086-00
Label, Ident, CSA, Redmond (Canadian Standards Assn. Risk Class 3)
334-1750-00
Label, Ident, ETL, Redmond (UL Approved Label) 334-1751-00
Label, CE Mark, 0.75" X 0.5", W / Num. 334-1595-00
Label, TÜV Product Service, 22 mm 334-1643-00
Label, Leadwire Warning 334-1246-00
Label, Model #, Serial #, SL Medical 334-1029-00
Label, Warning, Service 334-1086-00
Label, Warning, Top 334-0763-00
Label, Battery 334-0765-01
Label, Batteries, No Trash Can 334-1767-00
Label, Recycle, .75" X .75" 334-1398-00
CABLES AND CONNECTORS:
Power Cord, Domestic, 120V, 10A, 18 AWG, 10' 161-0032-00
Cable Assy, Main Board To LCD Display, Sharp 175-0957-00
Cable Assy, Main Board To EL Display, Sharp 175-0883-00
Cable, IR (white plastic ribbon cable from Main Board to Touchscreen /
Front Bezel). 175-0786-01
DC Input Connector (Replaced By 050-0120-00 Kit, Below) 175-0788-01
DC Input Cable Parts Replacement Kit (Includes 175-0788-01 DC Input
Connector Cable Assy and Anti-
Rotation Plate)
050-0120-00
DC Cable, Old Power Supply To Monitor – Listed for reference, replaced
By 012-0505-00, Below 012-0348-00
DC Cable With Strain Relief, Old Power Supply To Monitor - NOT for the
119-0251-01 Power Supply. 012-0505-00
DC Cable With Strain Relief, For the 119-0251-01 Ault Power Supply
010-1427-00
Cable Assy, 90309 to 90351 Expansion Housing 175-0842-00
DC Cable Assy, 12v Auto Adapter, 90309/69 - Order Thru Sales.
175-1017-01
CAPNOGRAPHY (OPTION -Q) PARTS
ELECTRONIC ASSEMBLIES:
PCB Assy, C02, 90515 670-8818-00
PCB Assy, CO2 / SDLC, Capno 670-0775-50
PCB Assy, Gas Interface, Filtered 670-0848-00
PCB Assy, I/O Bay, Ethernet, 90309 670-0623-07
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
PCB, Flex, CO2 EMI Suppression 388-0582-00
Cable, SDLC / IO / Gas 176-0304-00
Cable, Assy, 90515 PCBA To Pryon 175-0869-00
Cable Assy, Ethernet, I/O Bay, 90309 175-0910-00
CHASSIS COMPONENTS:
Cover, I/O Bay, Wireless / Gas, 90309 200-0228-00
Bracket, Ethernet / Flex, I/O Bay 407-0324-00
RANGER (WIRELESS NETWORK OPTION) PARTS
ELECTRONIC ASSEMBLIES:
Ranger Antenna, 2.4 GHz Dipole (stubby antenna) - this antenna has a
gain of x2. Do NOT use this antenna
with a 90310 Wireless Network Interface (WNI). Do NOT use the WNI
antenna with a wireless monitor.
117-0029-00
Proxim Radio Card -- Requires The Use Of Software Version 1.57M
010-0914-04
Proxim Radio Card -- Requires The Use Of Software Version 1.8EB
010-0914-05
Proxim Radio Card -- Requires The 174-0688-10 software EPROM on the
670-0829-00 Ethernet Interface
Board
010-0914-06
670-1221-00 PCB ASSY, MICRO ISA INTERFACE
Shown as manufactured with Expansion Card (left side) in place (for
use in 90367/90369-Z):
NOTE: If used with the 90309 Ranger or 90310 WNI, the expansion card
is removed when installed.
Shown with Expansion Card (left side) removed (for use in 90309 or
90310 WNI):
670-1221-00
PCB Assy, Wireless Ethernet Interface, 90309 670-0829-00
IC, Flash, 28F010 -Software EPROM to be installed as U110 on Wireless
Ethernet Interface PCB Assy.
NOTE: the 010-0914-06 Radio Card requires 174-0688-10 (version
2.06.00)
174-0688-xx
PCB Assy, I/O Bay, Ethernet, 90309 670-0623-07
CHASSIS COMPONENTS:
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
Cover, I/O Bay, Wireless, 90309 200-0201-00
Bracket, Ethernet / Flex, I/O Bay, 90309 407-0324-00
Cable Assy, Ethernet, I/O Bay, 90309 175-0910-00
Cable Assy, Flexport, I/O Bay, 90309 175-0909-00
Cable, Antenna, 90310 175-0922-00
Cable, I/O Bay, Wireless, 90309 175-0944-00
Plug, Hole, .343 D, .25 -- cap that covers hole for channel selector
134-0039-00
Label, I/O Bay W/L Connector 334-1429-00
90310-A, B, C - Wireless Network Interface - WNI
90310 Options List: -A = One Wireless Network Card
-B = Two Wireless Network Cards
-C = One Wireless Network Card (set as Slave)
ELECTRONIC ASSEMBLIES:
Omnidirectional Antenna, WNI - this antenna has a gain of x1. Do NOT
connect this antenna to 90309 or
90367 / 90369 Wireless monitors. Do NOT use the 117-0029-00 antenna
with a 90310.
650-0521-00
Proxim Radio card -- requires the use of software version 1.57M
010-0914-04
Proxim Radio card -- requires the use of software version 1.8EB
010-0914-05
Proxim Radio Card -- Requires The 174-0688-10 software EPROM on the
670-0829-00 Ethernet Interface
Board
010-0914-06
670-1221-00 PCB ASSY, MICRO ISA INTERFACE
Shown as manufactured with Expansion Card (left side) in place (for
use in 90367/90369-Z):
NOTE: If used with the 90309 Ranger or 90310 WNI, the expansion card
is removed when installed.
Shown with Expansion Card (left side) removed (for use in 90309 or
90310 WNI):
670-1221-00
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
PCBA, Connector Board, 90310 670-0841-00
PCB Assy, Ethernet Interface, 90309 670-0829-00
Software EPROM for 670-0829-00 Ethernet Interface Board (EPROM, U110,
V2.03.10, WLAN, 90309) 174-0688-09
Power Supply 90486
CHASSIS COMPONENTS:
Enclosure, Left, Module Housing, 90310 437-0093-02
Enclosure, Right, Module Housing, 90310 437-0093-01
Cover, Top, 90310 200-0208-00
Enclosure, Card Cage, 90310 437-0112-00
Cover, Left, 90310 200-0205-00
Cover, Right, 90310 200-0204-00
Cover, Rear Panel, DC, 90310 200-0209-00
Cover, Bottom, 90310 200-0206-00
Cover, Front Panel, 90310 200-0207-00
Label, Front Panel, 90310 334-1440-00
Plug, Hole, .343 D, .25 -- cap that covers hole for channel selector
134-0039-00
Screw, Decorative, 8-32, Light Gray 212-0086-00
CABLES AND CONNECTORS:
Cable, Antenna, 90310 175-0922-00
Cable Assy, PCB To Power Supply, 90310 175-0939-00
Cable Assy, Ribbon, AUI, 90310 175-0938-00
OBS
90321 Central Recorder
OBS Service Manual Part Number: 890321-001
OBS Recorder Assy, 1 Channel, Roll/Z-Fold Paper 366101-002
OBS Power Supply 307270-005
OBS CPU PCBA 307275-001
OBS ROM Pack 306190-009
OBS Mother Board 305135-002
OBS RCU PCBA 305138-001
OBS Key / Display Assembly 305130-002
OBS 90322 & 90323
100 mm & 50 mm System
Printers
90322 Service Manual Part Number: 890322-001
90323 Service Manual Part Number: 890323-001
ELECTRONIC ASSEMBLIES:
OBS Printhead, Hot Dot, Gen / Scan, 100 mm - for 90322 119-0042-01
OBS OEM Recorder, Thermal Print Head, 50 mm Gen/Scan Printhead - for
90323 366181-005
OBS CPU, 90322 / 90323 670-0246-01
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
OBS Recorder Controller (RCU) , 90322 / 90323 670-0214-00
OBS Display / Keyboard (Note: individual key caps or switches are not
available) 308010-001
OBS EEPROM, HMOS, 2816A, Programmed 364064-011
OBS Kit, AC Switch Replacement, 90322/90323 040-0652-00
OBS AC Power Switch, Front Panel (90322/90323) OBSOLETE - use
040-0652-00, above. 308030-001
OBS AC Hi/Lo Switchboard – to select 110/220 volt operation on rear
(90322/90323) 308075-001
OBS Fan for 90322/23 306618-002
OBS Power Supply (may NOT be substituted for 670-0507-00, below)
307270-005
OBS Power Supply (may be substituted for 307270-005, above)
670-0507-00
OBS Toroid Transformer for Power Supply 308063-002
OBS Power Routing Board 670-0586-00
OBS Cable on the 90323 printer that goes from the printhead to the
power routing cable (670-0586-00). Includes
white adapter between the two.
175-0370-00
OBS 12v Battery 384225-002
OBS 12v Battery Bracket (Battery Tray) 306802-001
CHASSIS & MECHANICAL COMPONENTS:
OBS Tear Bar With Brushes - for 90323 (not available separately for
90322) 119-0050-00
OBS Drive Roller - 90323 119-0044-00
OBS Drive Roller - 90322 019-0056-00
OBS Door Assembly, 90323 - the paper drawer that pulls out and has the
paper spindle 614-0025-00
OBS Timing Belt - old thin belt - 90323 214-0099-00
OBS Timing Belt - new thicker belt - 10 tooth - 90323 019-0121-00
OBS Timing Belt Upgrade Kit (10-tooth motor pulley for New Belt) -
90323 401-0006-00
OBS Timing Belt For 90322 019-0195-00
90339
RECORD
RA RL C LL LA Single-Lead UHF Telemetry
Transmitter
Service Manual Part Number: 070-0435-00, Rev J or higher
ELECTRONIC ASSEMBLIES:
PCB Assy, Dig TM TX, UHF, NB 670-0574-00
PCB Assy, ECG, 90339 670-9008-00
Conn, DIN Style, 2 Lead 131-1062-00
Conn, DIN Style, 3 Lead (For 90339-33) 131-1062-02
Shield, Electrical 337-0148-01
CHASSIS COMPONENTS:
Case Replacement Kit, 90339-33 (3-lead), Includes Label 040-0984-01
Case Replacement Kit, 90339 (2-Lead), Includes Label 040-0984-00
Label, ECG P.I. Connector, 90339 334-1013-00
Label, Top Cover, 90339 334-1014-00
Label, Rear ID, 90339 334-2152-00
Label, Rear ID (FCC ID), 90339-16 and 90339-74 334-1243-00
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
90340
RECORD
RA RL C LL LA 460-470 MHz
Telemetry Transmitter
Service Manual Part Number: 070-0309-00 (Service Manual for 9034x UHF
Telemetry)
ELECTRONIC ASSEMBLIES:
PCB Assy, Digital TM TX, UHF 670-0482-01
ECG Board - Original 90340 670-0285-01
ECG 5 Lead Safety Connector, DIN Style 131-0807-01
CHASSIS COMPONENTS:
Case Replacement Kit, 90340, with labels included (new case)
040-0369-02
Label, Rear ID, 90340 334-0385-01
Label, Channel No. 334-0636-00
Label, Option, Serial No, Tm TX 334-1241-00
Label, ECG P.I. Connector 334-0662-00
Cover, Enclosure, Dig. TM. TX. 200-0218-00
Case Top with Record Switch, 90340/90341 200-0254-00
Base Enclosure, Dig. TM. TX. (without ECG connector) 432-0038-01
Base Enclosure / Connector Assy, Dig TM TX (with ECG connector)
432-0173-03
Battery Compartment Door 202-0023-00
Battery Gasket 348-0240-00
Battery Spring Plug (little black plastic piece inside the spring)
201-0022-00
Spring, Hinge 214-0425-00
Pin (2 needed) 214-0426-00
90340-10
RECORD
RA RL C LL LA 460-470 MHz
Telemetry Transmitter
Service Manual Part Number: 070-0435-00, Rev H or higher
ELECTRONIC ASSEMBLIES:
PCB Assy, Digital TM TX, UHF 670-0482-01
ECG Board - for 90340-10 670-0285-01
ECG 5 Lead Safety Connector, DIN Style 131-0807-01
CHASSIS COMPONENTS:
Case Replacement Kit, 90340-10, with labels included (new case)
040-0871-00
Label, Rear ID, 90340-10 334-1780-00
Label, Channel No. 334-0636-00
Label, Option, Serial No, Tm TX 334-1241-00
Label, ECG P.I. Connector 334-0662-00
Cover, Enclosure (Case Top) 200-0218-00
Case Top with Record Switch, 90340/90341 200-0254-00
Base, Enclosure (Case Bottom, no ECG connector) 432-0038-01
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
Kit, Transmitter Base Replacement, 90340-10 - Includes all labels and
complete base assembly. 050-0355-00
Battery Compartment Door 202-0023-00
Battery Spring 214-0282-00
Battery Spring Plug (little black plastic piece inside the spring)
201-0022-00
Spring, Hinge 214-0425-00
Pin (2 needed) 214-0426-00
Battery Gasket 348-0240-00
90341
RECORD
RA RL C LL LA 460-470 MHz
Telemetry Transmitter
Service Manual Part Number: 070-0435-00
ELECTRONIC ASSEMBLIES:
PCB Assy, Digital TM TX, UHF, NB 670-0574-00
ECG Board 670-0573-03
ECG 5 Lead Safety Connector, DIN Style 131-0807-01
Battery Contact (for 9V battery compartment) 131-0808-01
Green battery contact wire 350194-005
Red battery contact wire 350194-002
Pin Strip Conn., 6 pin, Gold Plated (on ECG Board) 131-0518-00
Socket Strip Connector, 6 Sockets, Tin Plated (on TX Board)
131-0516-00
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
Pin Strip Conn., 3 pin, Gold Plated (on ECG Board) 131-0677-00
Socket Strip Connector, 3 Sockets, Tin Plated (on TX Board)
131-0690-00
CHASSIS COMPONENTS:
Case Replacement Kit, 90341, U.S. with labels included (new case)
040-0431-02
Case Replacement Kit, 90341, IEC, International 040-0734-00
Case Top 200-0218-00
Switch, Elastomeric Key 260-0038-00
Gasket, Top Cover 348-0057-00
Case Bottom Parts
NOTE: For 90341 case bottom parts, identify the style of battery door
that you have and select the correct
part numbers from the 3 types listed below:
Type 1: Case Bottom (without ECG connector) - for slide-on battery
door 650-0167-00
Battery Compartment Door (slides on) 202-0010-00
Type 2: Case Bottom (without ECG connector) - for hinged battery door,
no spring 432-0020-00
Battery Compartment Door (hinged, no spring) 202-0018-00
Gasket, Battery Door (for 202-0018-00 Battery Door, above) 348-0126-01
Hinge Pin (2 needed) 214-0283-00
Type 3: Case Bottom (without ECG connector) - for hinged battery door
with spring 432-0038-03
Case Bottom (with ECG connector) -for hinged battery door with spring
432-0173-02
Battery Compartment Door (uses spring) - does NOT include Door Gasket
(below) 202-0023-00
Gasket, Battery Door (for 202-0023-00 Battery Door, above) 348-0240-00
Spring, Hinge 214-0425-00
Hinge Pin (2 needed) 214-0426-00
Battery Door Assembly - Includes battery door, gasket, pins, and
springs all preassembled. Note: For use
with “Type 3” cases only. For other case types, order parts
separately.
050-0470-00
Case screws (4 - 40 X 3/8) - Install using torque wrench set to 3
in/lbs (34 cN/m) or damage may occur. 211-0285-00
Case screws with non-conductive plastic head (4 - 40 X 5/8) - Install
using torque wrench set to 3 in/lbs
(34 cN/m) or damage may occur.
211-0286-01
Case screws with metal head (4-40 X 5/8) -Part Obsolete, must use
211-0286-00 with non-conductive
plastic head.
211-0176-00
Case screws with metal head (4-40 X 3/8) -Part Obsolete, must use
211-0285-00. 211-0197-00
Rubber O-Ring washer for case screws 348-0270-00
Screws that attach ECG board to case, older transmitters only (two
needed) 211-0022-00
Split Lock Washer that goes with the ECG board screw (211-0022-00)
listed above 358053-005
Label, Channel No. (on case bottom) 334-0636-00
Label, Option, Serial No, TM TX (on case bottom) 334-1241-00
Label, Rear ID, 90341 (on case bottom) 334-5413-01
Label, Top Cover 334-0637-00
Label, ECG P.I. (L-shaped label around ECG lead connector) 334-0662-00
Label, Spacelabs Logo 334-1334-00
Battery Spring 214-0282-00
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
Battery Spring Plug (little black plastic piece inside the spring)
201-0022-00
90341-05
RECORD
RA RL C LL LA 608 - 614 MHz Narrow-Band
Telemetry Transmitter
Service Manual Part Number: 070-0744-00
ELECTRONIC ASSEMBLIES:
PCB Assy, ECG, 2 Ch, Dig TM TX 670-0573-03
PCB Assy, Dig TM TX, NB, RF, 608-614 MHz 670-1283-00
Shield, PCBA, RF, 90347 337-0225-02
Shield, ECG/RF Dig TM TX 337-0451-00
CHASSIS COMPONENTS:
Door, Battery Compartment, DTM TX 202-0023-00
Case screws with non-conductive plastic head (4 - 40 X 5/8) - Install
using torque wrench set to 3 in/lbs
(34 cN/m) or damage may occur.
211-0286-01
Case screws (4 - 40 X 3/8) - Install using torque wrench set to 3
in/lbs (34 cN/m) or damage may occur. 211-0285-00
Gasket, Top Cover Housing 348-0057-00
Gasket, O-Ring, .110 ID X .047 348-0270-00
Contact, Battery, 9v 131-0808-01
Gasket, Battery Door, DTM TX 348-0240-01
Spring, Coil, Battery 214-0282-01
Spring, Hinge, DTM TX 214-0425-00
Pin, Hinge, DTM TX 214-0426-00
Label, ECG P.I. Connector 5 Lead 334-0662-01
Label, Warning, Battery Insertion 334-1321-00
Label, Logo, 91341 334-2158-03
Label, I.D. 90341-05 WMTS 334-5553-04
Label, Opt/Ver/Sw, 90343 334-1241-01
Label,Ch.No Dig Tm 90343 334-2478-01
Label, Product Ident. Kit/Serial Num 334-1433-00
187.00 90341-16, 90341-74, and 90341-99
RECORD
RA RL C LL LA
VHF Telemetry Transmitters
90341 VHF Options:
90341-16 = E, F, and G Band (TV Channels 11, 12, and 13)
90341-74 = A, B, C, and D Band (TV Channels 7, 8, 9, and 10)
90341-99 = G-Band Only (TV Channel 13)
VHF Television Channel
TV Channel 7 (A-Band) = 174-180 MHz
TV Channel 8 (B-Band) = 180- 186 MHz
TV Channel 9 (C-Band) = 186-192 MHz
TV Channel 10 (D-Band) = 192-198 MHz
Frequency Bands:
TV Channel 11 (E - Band) = 198-204 MHz
TV Channel 12 (F - Band) = 204-210 MHz
TV Channel 13 (G - Band) = 210-216 MHz
Service Manual Part Number: 070-0584-00
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
ELECTRONIC ASSEMBLIES:
PCBA, Dig TM TX, VHF Low- used in 90341-74 670-0628-00
PCBA, Dig TM TX, VHF High - used in 90341-16 and 90341-99 670-0629-00
ECG 5 Lead Safety Connector, DIN Style 131-0807-00
CHASSIS COMPONENTS:
Case Replacement Kit, 90341-16, 90341-74, and 90341-99 VHF
Transmitters 040-0843-00
Case Top 200-0218-00
Case Bottom (without ECG connector) 432-0038-01
Label, ECG P.I. (L-shaped label around ECG lead connector) 334-0662-00
Label, Channel No. 334-0636-00
Label, Option, Serial No, TM TX 334-1241-00
Label, Rear, FCC ID, TX, VHF, for 90341-16 and 90341-74 VHF
Transmitter 334-1242-00
Label, Rear ID, VHF, For 90341-99 334-0703-00
90343-05 Telemetry Transmitter,
Multi-Parameter, WMTS 608-614 MHz
Service Manual Part Number: 070-0744-00
ELECTRONIC ASSEMBLIES:
PCBA, DIG TM TX, WB, RF 608-614 (RF Board) 670-0939-01
PCB Assy, Digital TM, ECG WB, RF 608-614 (ECG Board) 670-0285-02
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
Kit, Service, Replacement, SpO2 PCBA . Contains 670-0916-01 (PCBA,
SpO2, MPT DIG TM TX), 348-0270-00
(GASKET, O-RING), 334-2155-01 (Label, Patient Input, 90343), plus
hardware and Instructions. See note
below regarding PN 670-0916-00/-01.
050-0428-00
PCB, Assy, SpO2, MPT DIG TM TX Note: Upgrade kit 050-0428-00 (above),
which includes the 670-0916-01
PCBA and Install Instructions, corrects a possible problem with ECG
signal noise.
670-0916-00/-01
PCB, Flex NIBP/SpO2 388-0623-00
Cable Assy, SpO2 / RF, Flat Ribbon, 10 Pin 175-1026-00
Conn, DIN Style, 5 Lead Safety 131-0807-01
Shield, Electrical 337-0148-01
Shield, ECG/RF DIG TM TX 337-0451-00
Shield, PCB, RF 337-0225-01
Switch, Elastomeric Key, Dig TM 260-0118-00
Contact, Battery, 9v (Part number for one battery contact - order
quantity of 2 if both are needed) 131-0808-01
Wire, Stranded, 26 AWG, PVC, 300v, Red (battery contact wire)
350194-002
Wire, Stranded, 26 AWG, PVC, 300v, Green (battery contact wire)
350194-005
Adapter Cable Assy MPT / SpO2, Nellcor 700-0014-00
Cable, Interface, MPT / NIBP 012-0588-00
CHASSIS COMPONENTS:
Kit, Transmitter Housing Replacement, 90343-05. Includes all labels.
050-0169-00
Battery Door Assembly - Includes battery door, gasket, pins, and
springs all preassembled. 050-0470-00
Cover, Enclosure, MPT Digital TM - uses connector caps without tether
(detaches completely) 200-0236-00
Cover, Enclosure, MPT Digital TM - for use with tethered connector cap
200-0236-01
Cap, Connector D01 -connector cap without tether (detaches completely)
201-0029-00
Cap, Tethered, Connector -tethered connector cap 201-0029-01
Case Top with Record Switch, MPT Digital TM - uses connector caps
without tethers (caps detach
completely)
200-0254-02
Case Top with Record Switch, MPT Digital TM - for use with tethered
connector cap 200-0254-03
Cover, Enclosure, DIG TM MPT 200-0236-01
Base, Enclosure, DIG TM MPT (Case Bottom, ECG connector NOT included)
432-0038-04
Base/Connector Assy, DIG TM TX (Case Bottom with ECG connector
installed) 432-0173-02
Connector, DIN Style, 5 Lead Safety 131-0807-01
Kit, Transmitter Base Replacement, 90343-05 - Includes all labels, and
transmitter base assembly. 050-0356-00
Case screws with non-conductive plastic head (4 - 40 X 5/8) - MUST
install using torque wrench set to 3
in/lbs (34 cN/m) or damage may occur!
211-0286-00
Case screws (4 - 40 X 3/8) - MUST install using torque wrench set to 3
in/lbs (34 cN/m) or damage may
occur!
211-0285-00
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
Door, Battery Compartment 202-0023-00
Spring, Hinge 214-0425-00
Pin, Hinge (Part number for one pin - order quantity of 2 if both are
needed) 214-0426-00
Plate, Battery, DIG TM MPT 386-0255-00
Gasket, Top Cover Housing 348-0057-00
Gasket, O-Ring, Elastomeric, .110 ID X.047 CS 348-0270-00
Gasket, Battery Door 348-0240-01
Spring, Battery 214-0282-01
Plate, Battery 386-0255-00
Label, Cap 90343 334-2595-00
Label, Logo, 90343 334-2370-00
Label, M-PRMTR, DIG TM 90343 334-2159-00
Label, S/N, Digital TM 90343 334-2479-01
Label, ID, MPT 90343 WMTS 334-5354-03
Label, Channel. Number, DIG TM 90343 334-2478-01
Label, Patient Input 334-2155-01
Label, Setting/Battery 334-2156-00
Label, Option, Version, Serial No. 334-1241-01
90347-05 Ultraview Digital Telemetry, ECG,
WMTS 608 - 614 MHz
Service Manual Part Number: 070-0744-00 (Service Manual for Ultraview
Digital Telemetry)
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
ELECTRONIC ASSEMBLIES:
PCB Assy, Digital TM, ECG WB, RF 608-614 MHz 670-0285-02
PCBA, Dig TM TX, WB, 608-614 MHz 670-0929-00
Contact, Battery, 9v 131-0808-01
Conn, Din Style, 5 Lead Safety 131-0807-01
Switch, Elastomeric Key 260-0038-00
Shield, Electrical 337-0148-01
CHASSIS COMPONENTS:
Kit, Transmitter Housing Replacement, 90347-05 050-0168-00
Battery Door Assembly - Includes battery door, gasket, pins, and
springs all preassembled. 050-0470-00
Cover, Enclosure, Dig TM Transmit 200-0218-02
Case Top with Record Switch 200-0254-01
Base, Enclosure (Case Bottom only, no ECG connector) 432-0038-03
Case Bottom (with ECG connector installed) 432-0173-02
Kit, Transmitter Base Replacement, 90347-05 - Includes all labels, and
base assembly. 050-0357-00
Door, Battery Compartment 202-0023-00
Spring, Hinge 214-0425-00
Pin, Hinge 214-0426-00
Label, ECG P.I. Connector, 5 Lead 334-0662-01
Label, Logo 334-2158-00
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
Label, ECG, Dig TM TX 90347 334-2371-00
Gasket, Top Cover Housing 348-0057-00
Gasket, O-Ring, Elastomeric 348-0270-00
Gasket, Battery Door 348-0240-01
Spring, Coil, Battery 214-0282-00
Label, I.D. ECG, 90347-05 WMTS 334-5355-03
Label, Option, Serial No, TM TX 334-1241-00
Label, Channel No. 334-0636-00
Label, Product Ident. Kit/Serial 334-1433-00
90351-NIBP/Sp02
Expansion Housing
90351
-A = Adult/Neonate NIBP only (no Sp02)
-B = Adult NIBP only (no Sp02)
-C = Neonate NIBP only (no Sp02)
-D = Adult/Neonate NIBP with Sp02
Options List:
-E = Adult NIBP with Sp02
-F = Neonate NIBP with Sp02
-G = Sp02 only (no NIBP)
Service Manual Part Number: 070-0438-03 (90309 Scout Service Manual)
ELECTRONIC & PNEUMATIC ASSEMBLIES:
PCB Assy, Adult/Neonate NIBP, PCMS, Universal w/Pneumatics (Found in
some older units) 671-0538-00
PCB Assy, Adult NIBP, w / Pneumatics + Pump (also used in 90430)
671-0536-00
PCB Assy, Neonate NIBP w / Pneumatics + Pump (also used in 90429)
671-0537-00
PCB Assy, Adult / Neonate NIBP/ Sp02, w/Pneumatics + Pump (also used
in 90465) 671-0541-00
PCB Assy, Adult / Neonate NIBP/ Sp02, w/Pneumatics + Pump - improved
board - s/w version 1.04.16 or
greater ONLY
671-0541-02
Pump Assy, NIBP, Universal - includes motor cable and tubing
119-0214-00
Sp02 Board Replacement Kit - Includes 670-0491-03 (Sp02 Board),
386-0186-01 (Support Bar), and 3420103-
03 (Mylar Insulator).
050-0065-01
Sp02 Board Only (PCB Assy, Pulse Ox, Multi-Sensor), part of kit
050-0065-01, above. (also used in 90489
and 90465/66/67). NOTE: The -03 requires SpO2 s/w 3.03.55 + NIBP
1.03.55 or above. Confirm software
versions).
670-0491-01/03
CHASSIS COMPONENTS:
Enclosure, Top 437-0073-01
Enclosure, Bottom - remember to order the two labels, below.
437-0074-00
Label, Module S/W Versions 334-0904-00
Label, Model Number, Serial Number 334-1029-00
Chassis, NIBP, Expansion Module - also order connector label from
choices below: 441-0064-00
Label, Module, F/P, 90351, Adult and Neonatal NIBP 334-0893-01
Label, Module, F/P, 90351, Adult NIBP Only 334-0895-02
Label, Module, F/P, 90351, Neonatal NIBP Only 334-0897-02
Label, Module, F/P, 90351, Adult and Neonatal NIBP with Sp02
334-0894-02
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
Label, Module, F/P, 90351, Adult NIBP Only with Sp02 334-0896-02
Label, Module, F/P, 90351, Neonatal NIBP Only with Sp02 334-0898-02
Label, Module, F/P, 90351, Sp02 Only 334-0899-02
CABLES AND CONNECTORS: 334-08xx-02
Cable Assy, NIBP PCB to 90309 175-0842-00
External Sp02 Connector and Cable Assy ( CABLE, ASSY, FRONT, 12 PIN TO
MULTI-SP02) (Replaces 1750802-
00)
175-0742-01
90360-01 Remote Keypad
ELECTRONIC ASSEMBLIES:
PCB Assy, Transmitter, Remote Keypad 670-0601-00
Membrane Switch Panel 333-0304-00
CHASSIS COMPONENTS:
Top Cover 200-0156-00
Bottom Case Assy 437-0064-00
Battery Door 202-0019-00
Information Label 334-0651-00
Label, Information 334-0652-00
Label, Serial Number 334-7326-05
Label Set, Family 335-0001-00
Lanyard 016-0270-00
Lanyard Ring 354-0018-00
90360-02 Remote Keypad
Receiver
NOTE: For use with PCMS monitors, and the “Original” 1700 (90387). The
“Enhanced” 1700 requires use of
the 90360-03 Receiver.
ELECTRONIC ASSEMBLIES:
PCB Assy, Receiver, Remote Keypad 670-0600-00
Receiver Cable Assy -- 90360-02 (90360-03 uses the 012-0218-01)
012-0218-00
Flex Board 388-0390-00
CHASSIS COMPONENTS:
Top Cover 200-0157-00
Bottom Cover 432-0023-00
IR Window 331-0017-00
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
Dual Lock Strip, Velcro 214-0287-00
Label, Serial Number 334-7326-05
90360-03 Remote Keypad
Receiver
For Enhanced 1700 (90387) or 91387 (SL2700, SL2800, SL3800)
NOTE: The Enhanced 1700 requires use of the 90360-03 Receiver, the
670-0880-54 CPU, and I/O board
670-0878-05, and minimum software version 1.08.13 with Option -T.
Connects to the Nurse Alert
connector (J14 on the Enhanced 1700).
ELECTRONIC ASSEMBLIES:
(Drawing Item 11) PCB Assy, Receiver, Remote Keypad 670-0600-01
(Drawing Item 5) Cable Assy, Receiver, Remote Keypad -- 90360-03
(90360-02 uses the 012-0218-00) 012-0218-01
CHASSIS COMPONENTS:
(Drawing Item 2) Cover, Enclosure, 90360-03 200-0157-01
(Drawing Item 1) Base, Enclosure, IR Receiver 432-0023-00
(Drawing Item 3) Window, IR Receiver 331-0017-00
(Drawing Item 20) Mask 331-0019-01
(Drawing Item 4) Screw, 4x3/4", Pan Head 211-0201-00
(Drawing Item 6) Panel, RJ-11 Conn, 90360-03 333-0875-00
(Drawing Item 10) Label, Ident, Serial Number 334-7326-05
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
(Drawing Item 12) Fastener, Dual Lock, Strip, 1" X 3.37" (Velcro strip
on case assy -- opposite piece of
Velcro that attaches to flat surface to mount the 90360-03 = PN
214-0292-00) 214-0287-00
(Drawing Item 13) Label Overlay, Ident Serial Number 334-0264-01
(Drawing Item 27) Label, CE Mark 334-1595-00
90363 Ultraview 1500
Color Bedside Monitor
90363 Options
-F = Ethernet interface, SDLC, audio I/O, video,
alarm, serial; Provides non-interactive bed-to-bed
communication
-N = Vital Signs Calculations
-O = Drug Dose Calculations
-P = Interactive Network Functions
-Q = Data Shuttle (with 90470 or 90496 Module)
List:
-R = Patient Data Logger
-X = 220-240 volt operation
-04 = Four waveforms (standard)
-05 = Five waveforms
-06 = Six waveforms
Service Manual Part Number: 070-0750-01
ELECTRONIC ASSEMBLIES:
CPU, 90363 (see note below about securing NVRAM chip). 670-0880-01/02/
-03/-50
NVRAM Chip, U940 (IC, NOVRAM / RTC, DS1644, 32k X 8, PDIP28)
......................................................
NOTE: When moving or installing this chip it must be secured to the
CPU using one of the following:
Tape, Double Stick, 1/2" Wide (-01 CPU)
...........................................................................................
Cable Tie, 5.6", .1", Locking (-02 CPU or later)
..................................................................................
170-0190-00
253-0036-00
344-5018-00
Wyse Monitor, Color, Touch Screen, 15" 010-0681-00
Touchscreen Bezel Assembly 019-0249-00
PCB Assy, I/O Board, 90363 (Note: do NOT order the -03 or -04 version
of this board for a 90363 - the -03
version is used with the 90364 Ultraview 1600 ONLY).
670-0878-02
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
Fan 019-0248-00
AC Switch 019-0246-00
AC Input Assy (AC Socket & Fuse Holder) – Fuse Cap (below) Not
Included 019-0250-00
Fuse Drawer, 5 X 20 mm, 2 Pole (Cap for fuse holder) 352-0070-00
3v Lithium Battery 384322-001
Battery Pack, .65 AH, 12 VDC, NiMH 146-0053-00
CABLES AND CONNECTORS:
Power Cord, Domestic, 120v, 10A, 18 AWG, 10 foot 161-0032-00
Cable to use Remote Nurse Alert With 90363 Monitor (RJ-9 to RJ-9)
012-0182-00
Kit, Upgrade, Conversion 10 Base T To AUI - Kit needed to connect a
monitor with an RJ45 10 Base T
connector (models 90363, 90364, 90367, and 90369) to a 10 Base 5
network hub or wallplate connector.
Contains: 010-1132-00 (Media Converter, 10 To 5 Base T, Powered),
175-0951-00 (Cable Assy, Ethernet,
10 Base T, 3 Foot), 012-0590-01 (Cable Assy, Power, Media Converter),
and includes misc. hardware and
Installation Instructions
040-0992-00
CHASSIS COMPONENTS:
UCW / 1500 Pedestal Mount 016-0352-00
Kit, Replacement, Top Cover 050-0140-00
Panel, Rear, Primary, 90363/90365 333-0438-00
Fan Filter 019-0239-01
Cover, Fan Filter 019-0241-00
Plate, Config Remote Opt, 90363/90365 386-0254-00
Handle 367-0020-00
90364 Ultraview 1600
90364
-F = Ethernet interface, SDLC, audio I/O, video,
alarm, serial; Provides non-interactive bed-tobed
communication
-N = Vital Signs Calculations
-O = Drug Dose Calculations
-P = Interactive Network Functions
Options List:
-Q = Data Shuttle (with 90470 or 90496 Module)
-R = Patient Data Logger
-04 = Four waveforms (standard)
-05 = Five waveforms
-06 = Six waveforms
Service Manual Part Number: 070-0750-01
ELECTRONIC ASSEMBLIES:
PCBA, 860 CPU, 90363 670-0880-01/02/
-03/-50
PCBA, Motherboard W/Power, 90387 670-0914-01
Shield, ESD, Motherboard W/Power 337-0214-00
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
PCBA, Backplane W/Reg, 90387 (-03 version moves a capacitor away from
a chassis rivet on newer
90387/91387 units. The -03 replaces the -00, -01 and -02).
670-0915-03
PCBA, I/O Board, 90363 -- NOTE 1: Has large 25-pin connector labeled
J6 on upper right corner of rear
panel. NOTE 2: the -01 version is obsolete - order the -02. Always
replace 670-0878-XX PCBAs “Like-For-
Like”.
670-0878-02
PCBA, I/O BD, 90363, Ext. Touch -- NOTE: Has large 44-pin connector
labeled J19 on upper right corner of
rear panel. REQUIRED for use of the 91416B 15" Wyse CRT Display With
Touchscreen. --Replace 6700878-
XX PCBAs “Like-For-Like”.
J19
90364 UV1600
Serial Numbers
below 364-1xxxxx
(Connector = J6)
90364 UV1600
Serial Number
364-1xxxxx or above
OR
90387 UV1700
Serial Number
387-1xxxxx or above
(Connector = J19)
J6
670-0878-04
Power Supply, 80w, 18v 119-0251-00
Battery Pack, .65 AH / 12v DC, NiMH 146-0053-00
CABLES AND CONNECTORS:
Power Cord, Domestic, 120V, 10A, 18 AWG, 10' 161-0032-00
DC cable from 119-0251-00 Power Supply to monitor. 010-1428-00
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
Standoff, 4-40 X 1.35" L, Hex, Ault Power Supply - the standoffs on
the power connector to the monitor. 361-0201-00
Cable, Power Interconnect, 90387 (Note: The appearance of this cable
has changed from the original clothsheathed
design to a ribbon cable.)
175-1018-00
Cable Assy, SDLC/Power Interface (Short SDLC cable on back of monitor,
CPU to module bay) 012-0601-00
Cable Assy, Speaker, 90364 175-1046-00
Cable Assy, VGA, DB15, Male, 6 ft - used to connect video output to
Display. 012-0593-00
Touchscreen cable for use with flat panel displays that have a female
serial connector, including 91415-A
and 91418 (Cable Assy, Serial Data (RS232) DB9 male to DB9 male)
012-0395-00
Touchscreen cable for use with flat panel displays that have a male
serial connector (Cable Assy, RS232,
DB9 male to DB9 female, 6 foot)
012-0600-00
Touchscreen cable for use with 91416-B Display (Cable, Touchscreen
Interface, UV1600) - used to
connect 90364 with the 670-0878-03 or -04 I/O board to 91416-B, 15”
CRT Display
012-0620-00
CHASSIS COMPONENTS:
Panel, Rear, Primary, 90364 - used with I/O board 670-0878-02
333-0449-00
Panel, Rear, UV1600, W/91416-B Interface - used with I/O board
670-0878-03 or -04. 333-0449-01
Panel, Rear, 90387 333-0442-00
Bracket, Speaker, 90364 407-0399-00
Handle, Alum, 1"1g, 1" Ht, 4-40 Thd 367-0020-00
Divider, 4 Bay Module Housing, 9 426-0048-00
Enclosure, Left Half, 90491 437-0126-02
Enclosure, Right Half, 90491 437-0126-03
Foot, Round, .600" Dia, Santoprene 348-0205-00
Stud, Ground, Equal, Potential 355-0001-00
Support, Foot, 90491 386-0237-00
Bezel Assy, Front, 90387 203-0049-00
Chassis, 90387 441-0077-00
Kit, Upgrade, Conversion 10 Base T To AUI - Kit needed to connect a
monitor with an RJ45 10 Base T
connector (models 90363, 90364, 90367, and 90369) to a 10 Base 5
network hub or wallplate connector.
Contains: 010-1132-00 (Media Converter, 10 To 5 Base T, Powered),
175-0951-00 (Cable Assy, Ethernet,
10 Base T, 3 Foot), 012-0590-01 (Cable Assy, Power, Media Converter),
and includes misc. hardware and
Installation Instructions
040-0992-00
90367 and 90369 Ultraview 1030 Monochrome and Ultraview
1050 Color Portable Monitors
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
90367 / 90369
-B = Basic I/O (no Ethernet)
-F = Ethernet interface, SDLC, audio I/O, video,
alarm, serial; Provides non-interactive bedto-
bed communication
-G = Capnography, ethernet interface, SDLC,
audio I/O, video, alarm, serial
-J = Internal dual channel recorder, Polish
Language
-H = Capnography (Nova)
-N = Vital Signs Calculations
-O = Drug Dose Calculations
Options List:
-P = Interactive Network Functions
-Q = Data Shuttle (with 90470 or 90496 Module)
-R = Patient Data Logger
-U = Internal dual channel recorder (all languages
other than Polish)
-Z = Wireless Ethernet Communication
-03 = Three waveforms (1030 Only)
-04 = Four waveforms (standard)
-05 = Five waveforms
-06 = Six waveforms
Service Manual Part Number: 070-0706-01
NOTE ABOUT DISPLAYS AND BACKLIGHTS: The Sharp and NEC displays can be
recognized by finding
the manufacturer’s name on the assembly, or by looking at the cable
for the backlight - the NEC has 3 wires
while the Sharp has only 2.
ELECTRONIC ASSEMBLIES:
PCB Assy, Main, 90369 (prior to -04 does not have foam cushion
installed) NOTE: The new NEC display
requires -03 Rev AM, -04 Rev AD, or -06 Rev AA.
670-0851-03/04/-
06/-07/-08/09
Cushion, Vibration Dampening 348-0168-00
IC, NOVRAM / RTC, DS1644, 32K X 8, PDIP 28 170-0190-00
Display, LCD, Color, TFT, 640x480, NEC
New display part number (150-0340-00) replaces the Sharp display (and
old model NEC display) in newer
monitors. Order replacement display “Like for Like” as available.
150-0340-00
Kit, Service, 90367/9 LCD, New Sharp - contains 407-0382-02 (Bracket,
LCD, Right, Sharp
LQ104V1DG51), 407-0383-02 (Bracket, LCD, Left, Sharp, LQ104V1DG51),
150-0092-01 (Display, LCD,
640X480 Sharp, Dual Backlight), 175-1012-01 (Cable Assy, Main Board To
TFT, 90369), and 175-1539-00
(Cable, Backlight, Sharp LQ104V1DG51).
050-0414-00
Backlight Lamp Parts Replacement Kit, New Sharp LCD, LQ104V1DG51
019-0404-00
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
Display, LCD, 640X480 Sharp, Dual Backlight (New Sharp LCD,
LQ104V1DG51) 150-0092-01
Kit, Service, 90367/9, NEC LCD -- Contains 150-0104-00 (Display, LCD,
90367/9), 175-1012-02 (Cable,
Display, 90369, NEC), 407-0382-01 (Bracket, Display, Right, NEC,
90369), and 407-0383-01 (Bracket,
Display, Left, NEC, 90369)
050-0352-01
Backlight Lamp Parts Replacement Kit for NEC LCD Display - Includes
019-0272-00 (Lamp Backlight Repl,
NEC LCD) and Instructions.
050-0353-00
Display, LCD, Color, 640x480, Sharp NOTE:
OBSOLETE -- Replaced by the 050-0352-01 Kit, which
converts from a Sharp LCD to the NEC LCD display.
150-0092-00
Backlight Lamp Parts Replacement Kit for Sharp LCD Display - Includes
019-0266-01 (LAMP BACKLIGHT
REPL, SHARP LQ10367) and Instructions.
050-0156-00
Display, LCD, Color, TFT, 640x480, NEC 150-0103-00
PCB Assy, IRTS, 90369 -Just the Touchscreen Board 670-0884-01
PCB Assy, Interconnect, 90369 NOTE: The -03 adds Interconnect Frame
426-0039-04 to PCBA (670-0849xx)
as alignment fixture for module connector, to reduce the possibility
of connector damage.
670-0849-03
SDLC Connector on Interconnect PCBA 354640-015
SDLC module connector on Interconnect Board 354640-015
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
I/O Bay Assy, SDLC, Alarm, Ethernet, And COM Port, 90369 650-0552-00
PCB Assy, I/O Bay, Full Config, 90369 (I/O Bay With Gas, COM Port,
SDLC, And Alarm) -NOTE: THE -04
VERSION IS REQUIRED TO INTERFACE WITH SOME NON-SPACELABS NURSE ALERT
SYSTEMS.
670-0850-03/04
I/O Bay Rear Panel Connectors:
Alarm Connector ..................................131-1356-01 ( CONN,
JACK, 6-PIN, STR, PCB, RJ11)
Keyboard Connector ...........................131-1355-01 ( CONN,
JACK, 4-PIN, STR, PCB, RJ9)
Ethernet Connector ..............................131-1329-01 ( CONN,
JACK, 8-PIN, STR, PCB, RJ45)
Mouse Connector ................................131-1354-00 ( CONN,
MINI DIN, 6-P, STR, PCB, 0.37")
Audio Jacks (In and Out) .....................131-1359-01 ( CONN, 3.5
MM, STR, JACK, STEREO, 9.2)
Remote Display Connector ..................131-0800-00 ( CONN, D,
RCPT, 15-P, 9P SHELL, PC MNT)
SDLC & Serial Port Connectors ...........131-0973-00 ( CONN, RCPT, DB9
)
Fan, 40 mm, 12v 119-0186-01
Speaker, 2.5", 8 Ohm, 0.5 Watt 119-0255-00
Replacement Recorder, Polish language. Also order: Label, Recorder,
Paper Release, part number 3340867-
00.
119-0496-00
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
Recorder Replacement Kit - with Label - contains PN 119-0191-02
(Module, Hot Dot Recorder, Custom,
EMI). For all languages other than Polish.
NOTE: Identifying Like-For-Like Recorder Part Numbers: For any
90309/90367/90369 recorder replacement,
the customer MUST check the General Scanning (GSI) part number on the
recorder module being replaced.
The GSI part number is found on a silver label on the recorder. If the
recorder module being replaced is
labeled with GSI part number 600-06008-02, order 119-0191-00 (Module,
Hot Dot Recorder, Custom), NOT
the 050-0064-01 kit. If the GSI part number is 600-06008-03, order the
recorder replacement kit (PN 0500064-
01). This counts as a like-for-like exchange.
050-0064-01
Kit, Roller, Internal Recorder (includes drive roller and side gear)
050-0388-00
Kit, Door/Roller, Internal Recorder (includes door with paper holder,
drive roller, and side gear) 050-0389-00
Recorder CPU (RCU) 670-0624-05
Battery, Sealed Lead-Acid, 12v, 2.3 AH 146-0018-00
Battery, NIMH, 12V, 2.45 AH NOTE: This battery can ONLY be used with
90367 and 90369 units that have
serial numbers 367-1xxxxx or 369-1xxxxx, or have been updated by
installing the NIMH Battery Upgrade Kit
(below). The NIMH battery may NOT be used with the 90308 PC Express,
90309 Scout, or module housings.
ADDITIONAL NOTE: New NiMH batteries MUST undergo a complete
charge/discharge cycle 3 times before
patient use, or battery life will be only 45% of full capacity. Be
sure to do this.
146-0055-00
NIMH Battery Upgrade Kit - includes Contact Frame Assembly
(650-0279-01), installation instructions, and
one NIMH battery.
040-1073-00
Dual Bay external battery charger to charge both NiMH and Sealed
Lead-Acid (SLA) batteries, 100-240V 010-1114-01
Kit, Contact Frame Assy - Includes Battery Contacts in Square Plastic
Frame, Fan, and the Battery & Fan
Wires to the Main Board with connectors. NOT for use with the new NIMH
battery.
050-0144-00
Contact Frame Assy - for use with the new NIMH battery. 650-0279-01
Kit, Upgrade, Conversion 10 Base T To AUI - Kit needed to connect a
monitor with an RJ45 10 Base T
connector (models 90363, 90364, 90367, and 90369) to a 10 Base 5
network hub or wallplate connector.
Contains: 010-1132-00 (Media Converter, 10 To 5 Base T, Powered),
175-0951-00 (Cable Assy, Ethernet,
10 Base T, 3 Foot), 012-0590-01 (Cable Assy, Power, Media Converter),
and includes misc. hardware and
Installation Instructions
040-0992-00
EXTERNAL DC POWER SUPPLY:
Power Supply (External Ault Power Supply). NOTE: NO EXCHANGE – do not
order 119-0251-01-X. 119-0251-01
DC cable from Ault PS to monitor (Cable, Replacement, 119-0251-01
Power Supply) 010-1427-00
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
Power Cord, Domestic, 120V, 10A, 18 AWG, 10' 161-0032-00
Battery Charger - charges up to four Scout, Express, or 90367/90369
Lead-Acid Batteries -NOT for use
with the new NIMH battery.
010-1114-00
12v Auto Adapter Cable Kit, 90309/69 040-0986-01
CABLES AND CONNECTORS:
Cable Assy, DC Input Connector (Rear panel connector for external DC
power supply) 175-0788-01
Kit, Parts Replacement, TFT Cable/Pad, 90369 (incl. 348-0168-00 and
175-1012-01 Cable Assy, Main Board
To TFT (Sharp), 90369 (folded cable - Do Not Use the -00 version.
Check for the foam cushion listed
above on the Main Board and add if needed.)
050-0143-00
Cable, Display, NEC, 90369 175-1012-02
Cable, IR - Touchscreen Cable To Main Board 175-0786-01
Cable to use Remote Nurse Alert With 90367 and 90369 Monitors (RJ-9 to
RJ-9) 012-0182-00
Adapter to use standard computer keyboard with the 90367/90369
(Adapter Keyboard, PS2 To Modular) 012-0761-00
CHASSIS COMPONENTS:
Monitor Connector Alignment Service Kit. For use in 90367/90369/90309,
and 94000 MOM monitors ONLY.
Reduces the possibility of module connector damage due to misalignment
when a module is rapidly inserted
into the monitor. Each kit contains parts to retrofit 5 monitors.
NOTE: Contains alignment shims and related
hardware, but does NOT include parts to repair any existing connector
damage.
040-1480-00
Kit, Replacement, 90369 Rear Cover - Includes rear enclosure, labels,
handle, rubber feet, ground post,
battery door with latch and spring, and DC input connector with cable.
NOTE: does NOT include battery
retaining latch (105-0037-00).
050-0141-00
Bezel Subassembly, Front, 90369 -Includes:
Bezel, Front, 90369
.................................................203-0048-00 -NOT
AVAILABLE SEPARATELY
Shield, Display, 90369 .............................................
337-0201-00
Bezel, IR, 90369
....................................................... 203-0047-00
-NOT AVAILABLE SEPARATELY
Cap, Switch, Custom, 90369 ...................................
201-0026-00 -NOT AVAILABLE SEPARATELY
Gasket, Switch
........................................................ 348-0148-00
Lens, LED
................................................................
331-0020-00 -NOT AVAILABLE SEPARATELY
614-0058-00
Bracket, Display, Right, Old Sharp LQ10367, 90369 407-0382-00
Bracket, Display, Left, Old Sharp LQ10367, 90369 407-0383-00
Bracket, Display, Right, New Sharp LQ104V1DG51, 90369 407-0382-00
Bracket, Display, Left, New Sharp LQ104V1DG51, 90369 407-0383-00
Bracket, Display, Right, NEC, 90369 407-0382-01
Bracket, Display, Left, NEC, 90369 403-0383-01
Hex stand-off on rear panel connectors (Screwlock, Female, 4-40,
.188). Use with lock washer part
number 210-0054-00.
129-0039-00
Bracket, Display, Right, Sharp, 90369 407-0382-00
Bracket, Display, Left, Sharp, 90369 407-0383-00
Shield, Backlight, EMI, 90369 337-0198-00
Filter, Air, Extended Bezel, 90309 378-0096-00
Wall, PCMS Module, 90369 386-0249-00
Divider, Battery, 90369 426-0038-01
Door, Module Cage 202-0014-01
Spring, Torsion, Module Door 214-0342-00
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
Chassis, 90369 441-0073-00
Label, Recorder, Paper Release 334-0867-00
Plug, Enclosure Bottom 134-0044-00
Handle, Enclosure 367-0014-00
Retainer, Handle 343-0096-00
Battery Door 202-0020-00
Spring, Battery Door 214-0328-00
Pin, Battery Door Hinge 214-0318-00
Latch, Battery Door 105-0038-00
Battery Latch 105-0037-00
Battery Door Latch Spring 214-0333-01
Battery Spring, 90309/90369 214-0518-00
Label, Warning, Top 334-0763-00
Label, Battery 334-0765-01
Label, Voltage Input, Gas Opt Q/U 334-1839-00
Label, Model #, Serial #, SL Medical 334-1029-00
Label, Recycle, .75" X .75" 334-1398-00
Label, Batteries, No Trash Can 334-1767-00
Label, Leadwire Warning 334-1246-00
Label, Warning, Service 334-1086-00
Label, Ext. Power Supply Requirement, English 334-1905-00
CAPNOGRAPHY (OPTION -G or OPTION -H) PARTS
ELECTRONIC ASSEMBLIES:
PCBA, I/O Bay, Full Config (Option G and Option H) 670-0850-04
PCB Assy, C02, 90515 (Option G) 670-8818-00
PCBA, C02/ SDLC, Capno (Option G) 670-0775-50
PCBA, Gas Interface, Filtered (Option G) 670-0848-00
PCBA, Flex, C02 EMI Suppression (Option G) 388-0582-00
Cable Assy, 90515 PCB To Pryon (Option G) 175-0869-00
Cable, SDLC / IO / Gas (Option G) 176-0304-00
PCBA , OEM, C02 , 90516 (Option H) 670-8820-00
PCBA, C02 / SDLC, Capno (Option H) 670-9014-50
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
PCBA, EMI Interface, Capno (Option H) 670-0886-50
Cable, Flex EMI Interface, 90516 (Option H) 175-1006-00
Cable, SDLC / IO / Gas (Option H) 176-0304-00
CHASSIS COMPONENTS:
Cover, I/O Bay, Gas, Comm, RS232 (Option G and Option H) 200-0229-00
Plate, Support, PCBA, Gas (Option G) 386-0245-00
Insulator, Mylar, Capno, Exp Housing (Option G) 342-0143-00
Insulator, Mylar, PCBA Divider, Gas (Option G) 342-0144-00
Plate, Support, Gas (Nova),90369 (Option H) 386-0245-50
Insulator, Mylar, Capno, Nova, 90369 (Option H) 342-0143-50
Insulator, Module Cover, Top (Option H) 342-0155-50
WIRELESS ETHERNET OPTION PARTS
Ranger Antenna, 2.4 GHz Dipole (stubby antenna) - this antenna has a
gain of x2. Do NOT use this antenna
with a 90310 Wireless Network Interface (WNI). Do NOT use the WNI
antenna (650-0521-00) with a
wireless monitor (90309 or 90367 / 90369).
117-0029-00
Proxim Radio card -- requires the use of software version 1.57M
010-0914-04
Proxim Radio card -- requires the use of software version 1.8EB
010-0914-05
Proxim Radio Card -- NEW -- Requires 670-1221-00 PCB ASSY, MICRO ISA
INTERFACE 010-0914-06
670-1221-00 PCB ASSY, MICRO ISA INTERFACE
Shown as manufactured with Expansion Card (left side) in place (for
use in 90367/90369-Z):
NOTE: If used with the 90309 Ranger or 90310 WNI, the expansion card
is removed when installed.
670-1221-00
Cable, Antenna, 90363/90369 (cable from stubby antenna to radio card)
175-0922-01
Cable, Flex Circuit, 90363/90369 (ribbon cable from radio card to Main
Board) 175-1002-01
90385
Universal Clinical
Workstation (UCW)
“Classic” Version
Note: How to identify UCW versions (“Classic” or “Enhanced”)
· The “Classic” 90385 has a serial number below 385-3xxxxx
· The “Enhanced” 90385 has a serial number of 385-3xxxxx or higher
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
90385 Options
-A = UCW Central Station capability
-B = UCW Bedside-only capability
-E = Color Display
-F = 4 Waveforms
-G = 5 Waveforms
-H = 6 Waveforms
-I = 7 Waveforms
-J = 8 Waveforms
-K = 12 Waveforms
-L = 16 Waveforms
-M = Local Graphic and Tabular Trends
-N = Local Vital Signs Calcs
List:
-O = Local Drug Dose Calculations
-P = Interactive and Advanced Network Functions
-Q = Data Shuttle (with 90470 or 90496 Module)
-R = Patient Data Logger
-S = Dynamic Network Access (DNA)
-T = VT220 Terminal Emulation via RS-232
-U = Telemetry Central (non-networked)
-V = 12-Lead ECG Display Support (90492 or 90496
modules)
-W = Full Bed Review (FBR)
-Y = Alarm Pager Interface
-Z = Wireless Ethernet
Service Manual Part Number: 070-0470-01 (Rev B)
ELECTRONIC ASSEMBLIES:
CPU Note: Option V, 12-Lead ECG Display Support, requires the 16-trace
CPU for Full View display,
regardless of the number of waveforms the UCW is configured for
(Options F thru L)
U690 EEPROM, 93C66, 256 X 16 - Options chip backed up by lithium
battery - must be programmed before
shipping to match installed UCW options.
156-0664-00
CPU, No E2PROM, 8 Trace, with SCSI port - Exchange CPU Only - MUST
TRANSFER U690 EPROM FROM
OLD CPU TO NEW.
673-0173-10
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
CPU, No E2PROM, 16 Trace, with SCSI port - Exchange CPU Only - MUST
TRANSFER U690 EPROM FROM
OLD CPU TO NEW.
673-0175-10
CPU, No E2PROM, 8 Trace, w/Floating point Co-Processor, No SCSI Port,
Includes Blank Plate For SCSI Port
- Exchange CPU Only - MUST TRANSFER U690 EPROM FROM OLD CPU TO NEW.
673-0173-11
CPU, No E2PROM, 16 Trace, w/Floating point Co-Processor, No SCSI Port,
Includes Blank Plate For SCSI
Port - Exchange CPU Only - MUST TRANSFER U690 EPROM FROM OLD CPU TO
NEW.
673-0175-11
72-Pin SIMM For J540 on CPU numbers 673-0173-01, 673-0173-11,
673-0175-01, and 673-0175-11 -must
be Factory programmed for current software version.
670-0903-00
GRFX Memory SIMM 170-0125-00
80-Pin SIMM For J540 on CPU numbers 673-0173-00, 673-0173-10,
673-0175-00, and 673-0175-10 -must
be Factory programmed for current software version.
670-0726-00
Stiffener, SIMM, 80 Pin, 90385 - used to secure 80-pin SIMM on
673-0173-10 and 673-0175-10 CPU’s. 386-0353-00
Memory Module, DRAM, 2M X 32, 70 NS, SIMM 72 -- Graphics memory SIMM,
for J590 170-0125-00
I/O Logic Assembly (I/O Board) 019-0237-00
Display Monitor - UCW w/o CPU (Remember to swap out the top cover to
keep the serial number label). 010-0681-00
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
Touchscreen / Bezel Assembly 019-0249-00
Speaker 019-0254-00
Fan 019-0248-00
AC Switch 019-0246-00
AC Input Assy (AC Socket & Fuse Holder) – Fuse Drawer / Cap (below)
Not Included 019-0250-00
Fuse Drawer, 5 X 20 mm, 2 Pole (Cap for fuse holder) 352-0070-00
Fuse, 3A, 120v, Slow -Blow 159-0080-00
Fuse, 3.15A, 240v (International Fuse) 159-0019-00
Battery, NiMH, 8.4v, 120 mA, 9v Style, for CPU RAM Backup. (Replaces
NiCad battery) 146-0046-00
Lithium Battery, 3v 384322-001
CABLES AND CONNECTORS:
Power Cord, Domestic, 120V, 10A, 18 AWG, 10' 161-0032-00
Cable, CPU Power Test Adapter, 90385 - used to connect power to CPU
while changing Lithium battery 012-0412-00
Cable Assy, I/O-CPU ( internal RGB Video Cables) 019-0260-00
RGB Cable from CPU to I/O Board (Cable Assy, I/O-CPU, Video)
019-0260-00
CHASSIS COMPONENTS:
UCW Pedestal Mount 016-0352-00
Screws that secure the CPU tray 211-0256-00
Kit, 90385 Top Cover Replacement - Includes all needed blank labels
050-0140-00
Middle Bezel - The part of the bezel that's behind the touchscreen
(Assy, Bezel, Middle, 15" Monitor) 019-0242-00
Keyboard, Wyse (alt: 90411 keyboard with 012-0484-00, Adapter,
Keyboard, IBM AT To Wyse) 010-0814-00
Keyboard Adapter, to connect a PS2 keyboard to UCW 012-0761-00
Keyboard Adapter IBM AT To Wyse 012-0484-00
Mouse, PS2, 2 Button 010-0609-00
Assy, Housing, Top, 15" Monitor 019-0243-00
Fan Air Filter 019-0239-01
Cover, Fan Filter 019-0241-00
Power Cord Retainer (if the screws are needed, order separately using
part number below) 019-0256-01
Screw for Power Cord Retainer (Screw, M 3x6 mm, Binding Hd, Phil,
Black Ox) 211-0256-00
Cover for SCSI Connector Cutout, W/Mounting Clips (if CPU has no SCSI
connector) 200-0235-00
Standoff, I/O BD To CPU (Screws: 211-0057-00) 361-0119-00
Label, Model #, Serial #, Options 334-1261-00
Label, Leadwire Warning 334-1246-00
Label, Ident, CSA, Redmond 334-1750-00
Label, Ident, ETL, Redmond 334-1751-00
Label, CE Mark, 0.75" X 0.5", w/Numbers 334-1595-00
Label, TÜV Product Service, 22 mm 334-1643-00
Label, CE Mark, 3" X 2", w/Numbers 334-1597-00
Label, Recycle, .75" X .75" 334-1398-00
Label, Regulatory, SEV, SL Medical 334-1035-00
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
Label, Fuse Rating, 1.3a/220-240 334-1064-00
Stud, Oval Slotted, 1/4 Turn -Screws that hold UCW base onto round
wall mount base plate. 355-0010-00
Retainer, For Stud 355-0010-00 (above) 343-0121-00
Top Cover Removal "Tool" (U-shaped plastic pry tool) 003-0085-00
90385
Universal Clinical
Workstation (UCW)
“Enhanced” Version
Note: How to identify UCW versions (“Classic” or “Enhanced”)
· The “Classic” 90385 has a serial number below 385-3xxxxx
· The “Enhanced” 90385 has a serial number of 385-3xxxxx or higher
90385 Options
-A = UCW Central Station capability
-B = UCW Bedside-only capability
-E = Color Display
-F = 4 Waveforms
-G = 5 Waveforms
-H = 6 Waveforms
-I = 7 Waveforms
-J = 8 Waveforms
-K = 12 Waveforms
-L = 16 Waveforms
-M = Local Graphic and Tabular Trends
-N = Local Vital Signs Calcs
List:
-O = Local Drug Dose Calculations
-P = Interactive and Advanced Network Functions
-Q = Data Shuttle (with 90470 or 90496 Module)
-R = Patient Data Logger
-S = Dynamic Network Access (DNA)
-T = Infrared Remote Control
-U = Telemetry Central (non-networked)
-V = 12-Lead ECG Display Support (90492 or 90496
modules)
-W = Full Bed Review (FBR)
-Y = Alarm Pager Interface
-Z = Wireless Ethernet
Service Manual Part Number: 070-0470-01 (Rev B)
ELECTRONIC ASSEMBLIES:
Original “Enhanced” CPU - used with the 670-0878-04 I/O board and
software version 1.08.xx). 670-0880-04
CPU - adds support for the remote keypad function. Forward and
backward compatible with the 670-088054.
670-0880-05
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
New “Enhanced” CPU -adds support for the remote keypad function. The
670-0880-05 also has this
feature.
NOTE: Also requires use of new 670-0878-05 I/O Board for Option -T.
Units without Option -T may use
either the -04 or the -05 I/O board.
670-0880-54
Original “Enhanced” I/O - used with the 670-0880-04 CPU and software
version 1.08.xx). 670-0878-04
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
New “Enhanced” I/O board NOTE: The 670-0878-05 or above is required
for Option -T (Infrared Remote
Control option)
670-0878-05/07
Wyse Display Monitor - UCW w/o CPU (Remember to swap out the top cover
to keep the serial number
label.)
010-0681-00
Touchscreen / Bezel Assembly 019-0249-00
Speaker 019-0254-00
Fan 019-0248-00
AC Switch 019-0246-00
AC Input Assy (AC Socket & Fuse Holder) – Fuse Drawer / Cap (below)
Not Included 019-0250-00
Fuse Drawer, 5 X 20 mm, 2 Pole (Cap for fuse holder) 352-0070-00
Fuse, 3A, 120v, Slow -Blow 159-0080-00
Fuse, 3.15A, 240v (International Fuse) 159-0019-00
Battery, NiMH, 8.4v, 120 mA, 9v Style, for CPU RAM Backup. (Replaces
NiCad battery) 146-0046-00
Lithium Battery, 3v 384322-001
CABLES AND CONNECTORS:
Power Cord, Domestic, 120V, 10A, 18 AWG, 10' 161-0032-00
CHASSIS COMPONENTS:
UCW Pedestal Mount 016-0352-00
Screws that hold in the CPU Tray 211-0256-00
Kit, 90385 Top Cover Replacement - Includes all needed blank labels
050-0140-00
Middle Bezel - The part of the bezel that's behind the touchscreen
(Assy, Bezel, Middle, 15" Monitor) 019-0242-00
Keyboard Adapter, to connect a 90411 keyboard to UCW 012-0484-00
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
Keyboard Adapter, to connect a PS2 keyboard to UCW 012-0761-00
Mouse, PS2, 2 Button 010-0609-00
Assy, Housing, Top, 15" Monitor 019-0243-00
Fan Air Filter 019-0239-01
Cover, Fan Filter 019-0241-00
Power Cord Retainer (if the screws are needed, order separately using
part number below) 019-0256-01
Screw for Power Cord Retainer (Screw, M 3x6 mm, Binding Hd, Phil,
Black Ox) 211-0256-00
Cover for SCSI Connector Cutout, W/Mounting Clips (if CPU has no SCSI
connector) 200-0235-00
Standoff, I/O BD To CPU (Screws: 211-0057-00) 361-0119-00
Label, Model #, Serial #, Options 334-1261-00
Label, Leadwire Warning 334-1246-00
Label, Ident, CSA, Redmond 334-1750-00
Label, Ident, ETL, Redmond 334-1751-00
Label, CE Mark, 0.75" X 0.5", w/Numbers 334-1595-00
Label, TÜV Product Service, 22 mm 334-1643-00
Label, CE Mark, 3" X 2", w/Numbers 334-1597-00
Label, Recycle, .75" X .75" 334-1398-00
Label, Regulatory, SEV, SL Medical 334-1035-00
Label, Fuse Rating, 1.3a/220-240 334-1064-00
Stud, Oval Slotted, 1/4 Turn -Screws that hold UCW base onto round
wall mount base plate. 355-0010-00
Retainer, For Stud 355-0010-00 (above) 343-0121-00
Top Cover Removal "Tool" (U-shaped plastic pry tool) 003-0085-00
90386 UCW - ID and Remote Display Interface (RDI) (Option D)
(Replaced By 90387 Ultraview 1700)
Service Manual Part Number: 070-0544-00
ELECTRONIC ASSEMBLIES:
CPU, 8-Trace 673-0173-10
PCB Assy, RDI Console I/O (I/O Board) 670-0788-00
RDI Interconnect Board 670-0789-00
Power Supply 670-0782-00
90387
Ultraview 1700
“Classic” Version
Note: How to identify 90387 versions (“Classic” or “Enhanced”)
· The “Classic” 90387 has a serial number below 387-1xxxxx
· The “Enhanced” 90387 has a serial number of 387-1xxxxx or higher.
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
90387 Options
-A = Central Station and Bedside capability
-B = Bedside-only capability
-D = Configurable Remote Display Interface
-F = 4 Waveforms
-G = 5 Waveforms
-H = 6 Waveforms
-I = 7 Waveforms
-J = 8 Waveforms
-K = 12 Waveforms
-L = 16 Waveforms
-M = Local Graphic and Tabular Trends
-N = Local Vital Signs Calcs
List:
-O = Local Drug Dose Calculations
-P = Interactive and Advanced Network Functions
-Q = Data Shuttle (with 90470 or 90496 Module)
-R = Patient Data Logger
-S = Dynamic Network Access (DNA)
-T = VT220 Terminal Emulation via RS-232
-U = Telemetry Central(non-networked)
-V = 12-Lead ECG Display Support (90492 or 90496
modules)
-W = Full Bed Review (FBR)
-Y = Alarm Pager Interface
-Z = Wireless Ethernet
Service Manual Part Number: 070-0747-01
ELECTRONIC ASSEMBLIES:
CPU Note: Option V, 12-Lead ECG Display Support, requires the 16-trace
CPU for Full View display,
regardless of the number of waveforms the 1700 is configured for
(Options F thru L)
CPU, No E2PROM, 8 Trace, w/Floating point Co-Processor, No SCSI port,
Includes Blank Plate For SCSI Port
- Exchange CPU Only - MUST TRANSFER U690 EPROM FROM OLD CPU TO NEW.
673-0173-11
CPU, No E2PROM, 16 Trace, w/Floating point Co-Processor, No SCSI port,
Includes Blank Plate For SCSI Port
- Exchange CPU Only - MUST TRANSFER U690 EPROM FROM OLD CPU TO NEW.
673-0175-11
PCB Assy, CPU, No E2PROM, 16 Trace, w/Floating point Co-Processor,
Tested, No SCSI port, Includes Blank
Plate For SCSI Port.
673-0175-11
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
72-Pin SIMM For J540 on CPU numbers 673-0173-01, 673-0173-11,
673-0175-01, and 673-0175-11 -must
be Factory programmed for current software version.
670-0903-00
80-Pin SIMM For J540 on CPU numbers 673-0173-00, 673-0173-10,
673-0175-00, and 673-0175-10 -must
be Factory programmed for current software version.
670-0726-00
Stiffener, SIMM, 80 Pin, 90385 - used to secure 80-pin SIMM on
673-0173-10 and 673-0175-10 CPU’s. 386-0353-00
Memory Module, DRAM, 2M X 32, 70 NS, SIMM 72 -- Graphics memory SIMM,
for J590 170-0125-00
U690 EEPROM, 93C66, 256 X 16 - Options chip backed up by lithium
battery - must be programmed before
shipping to match installed UCW options.
156-0664-00
PCB Assy, 10 Base-T Adapter, 90385 670-0875-00
PCB Assy, I/O, 90387 670-0913-00
PCB Assy, Motherboard W/Power 670-0914-00
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
New - PCB Assy, Motherboard W/Power - supports 90491 & 90499 Module
Housings without the use of an
external power supply. * REQUIRED TO USE THE -01 BACKPLANE BOARD.
670-0914-01
PCB Assy, Backplane 670-0915-00
PCB Assy, Backplane - supports 90491 & 90499 Module Housings without
the use of an external power
supply. * REQUIRES THE -01 MOTHERBOARD.
670-0915-01/02/-
03
Backplane PCBA Module SDLC Connector: CONN-DSUB, 15P, N, FEMALE,
W/STNDF, .375 131-1279-00
Backplane PCBA External SDLC Connector J2: CONN-DSUB, 26PHD, FEMALE,
W/STNDF 131-1282-00
Cable Assy, SDLC/Power Interface - to connect to 90491 & 90499 Module
Housings that are not using an
external power supply.
012-0601-00
Power Supply, External, 80w, 18v, Medical, 90491 119-0251-00
Battery Pack, .65 A H /12 VDC, NIMH, 10 AAA 146-0053-00
CABLES AND CONNECTORS:
Power Cord, Domestic, 120V, 10A, 18 AWG, 10' 161-0032-00
DC cable from Power Supply to monitor (Cable, Replacement, 119-0251-00
Power Supply) 010-1428-00
Standoff, 4-40 X 1.35" L, Hex, Ault Power Supply - the standoffs on
the power connector to the monitor. 361-0201-00
Cable Assy, RGB, Coax, Internal, 90386 175-0888-00
Cable, Power Interconnect, 90387 175-1018-00
Cable Assembly, 2 X 5 IDC, 1.75" 175-1020-00
Cable Assembly, 2 X 13 IDC, 1.5" 175-1021-00
Cable Assy, SDLC With Pow er (short SDLC cable from module side to CPU
side) 012-0392-00
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
Cable, LCD Panel To 90387, 4 Foot (Cable with all connectors for VGA,
audio, touchscreen, mouse, and
keyboard from 90387 to 91414 or 91415 flat panels)
012-0594-04
Cable Assy, VGA, DB15, Male both ends, 6 Foot 012-0593-00
Cable, Audio, Mini Stereo, 6 Foot 012-0595-00
Cable Assy, RS232, DB9 male to DB9 female, 6 foot (Touchscreen cable)
012-0600-00
Cable, Touchscreen, Interface, UV1700 012-0599-00
Cable, Touchscreen, Interface, 25' 012-0599-20
Cable Assembly, Touchscreen, 90387 (Adapter cable needed to connect
the 012-0600-00 Touchscreen
cable to the UV 1700)
012-0596-00
CHASSIS COMPONENTS:
Bezel Assy, Front, 90387 - assembly includes 202-0021-01 (Door, Module
Housing, 90485), 203-0046-00
(Bezel, 4 Bay Module Housing, 90491), 214-0491-00 (Spring, Torsion,
Door), 306766-001, (Pin, Hinge,
Module Cage), 331-0030-00 (Lens, Light Pipe), 333-0441-00 (Panel,
Vent, Bezel Assy, 90387), and 3440058-
00 (Clip, Retention, Module Door)
203-0049-00
Panel, CPU - I/O Drawer, MIDI, 90387 333-0440-00
Label, Model #, Serial #, Options, S 334-1261-00
Foot, Round, .600" Dia, Santoprene 348-0205-00
Handle, Alum, 1"1 G, 1" Ht, 4-40 THD 367-0020-00
Chassis, 90387/91387 Note: Service parts will stock a small amount of
441-0077-00 chassis to support the
early version 90387 that required an additional card guide.
441-0077-02
Support, Foot, 90491 386-0237-00
Divider, 4 Bay Module Housing, 90491 426-0048-00
Enclosure, Left Half, 90491 437-0126-02
Enclosure, Right Half, 90491 437-0126-03
Mounting Holster, 90387 Power Supply 016-0511-00
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
90387
Ultraview 1700
“Enhanced” Version
Note: How to identify 90387 versions (“Classic” or “Enhanced”)
· The “Classic” 90387 has a serial number below 387-1xxxxx
· The “Enhanced” 90387 has a serial number of 387-1xxxxx or higher.
90387 Options
-A = Central Station and Bedside capability
-B = Bedside-only capability
-D = Configurable Remote Display Interface
-F = 4 Waveforms
-G = 5 Waveforms
-H = 6 Waveforms
-I = 7 Waveforms
-J = 8 Waveforms
-K = 12 Waveforms
-L = 16 Waveforms
-M = Local Graphic and Tabular Trends
-N = Local Vital Signs Calcs
List:
-O = Local Drug Dose Calculations
-P = Interactive and Advanced Network Functions
-Q = Data Shuttle (with 90470 or 90496 Module)
-R = Patient Data Logger
-S = Dynamic Network Access (DNA)
-T = VT220 Terminal Emulation via RS-232
-U = Telemetry Central(non-networked)
-V = 12-Lead ECG Display Support (90492 or 90496
modules)
-W = Full Bed Review (FBR)
-Y = Alarm Pager Interface
-Z = Wireless Ethernet
Service Manual Part Number: 070-0470-02
ELECTRONIC ASSEMBLIES:
Original “Enhanced” CPU - used with the 670-0878-04 I/O board and
software version 1.08.xx). 670-0880-04
CPU - adds support for the remote keypad function. Forward and
backward compatible with the 670-088054.
670-0880-05
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
New “Enhanced” CPU -adds support for the remote keypad function. The
670-0880-05 also has this
feature.
NOTE: Also requires use of new 670-0878-05 I/O Board for Option -T.
Units without Option -T may use
either the -04 or the -05 I/O board.
670-0880-54
Original “Enhanced” I/O Board - used with the 670-0880-04 CPU and
software version 1.08.xx). --Replace
670-0878-XX PCBAs “Like-For-Like”.
670-0878-04
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
New “Enhanced” I/O board NOTE: The 670-0878-05 is required for Option
-T (Infrared Remote Control).
Replace 670-0878-Xx PCBAs “Like-For-Like”.
670-0878-05
PCBA, I/O, Remote Keypad Compatible, No Wyse Support (J19 connector
removed, rear panel cutout must
be covered with 200-0235-00, below) NOTE: -07 To Be Used With 90387
Only. Enhanced UCW uses
670-0878-05. Replace 670-0878-XX PCBAs “Like-For-Like”.
670-0878-07
Cover for J19 Wyse Connector Cutout, W/Mounting Clips (if CPU has no
SCSI connector) 200-0235-00
PCBA, Backplane W/Reg, 90387 (- replace this PCBA like-for-like. The
-03 replaces the -01 and -02). 670-0915-01/02/-
03
Backplane PCBA Module SDLC Connector 131-1279-00
Backplane PCBA External SDLC Connector J2 131-1282-00
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
PCBA, Motherboard W/Power, 90387 670-0914-01
Shield, ESD, Motherboard W/Power 337-0214-00
Cable, Power, Interconnect 175-1018-01
Power Supply, External, 80w, 18v, Medical, 90491 119-0251-00
Battery Pack, .65 A H /12 VDC, NIMH, 10 AAA 146-0053-00
CABLES AND CONNECTORS:
Power Cord, Domestic, 120V, 10A, 18 AWG, 10' 161-0032-00
Cable Assy, SDLC With Power (short SDLC cable from module side to CPU
side) 012-0392-00
DC cable from External 119-0251-00 Power Supply to monitor 010-1428-00
Cable, LCD Panel To 90387, 4 Foot (Cable with all connectors for VGA,
audio, mouse, and keyboard from
90387 to 91414 or 91415 flat panels). Provides all connectors EXCEPT
touchscreen - need 012-0395-00
(Cable Assy, Serial Data, RS232)
012-0594-04
Cable Assy, VGA, DB15, Male both ends, 6 Foot 012-0593-00
Cable, Audio, Mini Stereo, 6 Foot 012-0595-00
Cable Assy, RS232, DB9 male to DB9 male, 6 foot (Touchscreen cable)
012-0395-00
Cable Assy, RS232, DB9 male to DB9 female, 6 foot 012-0600-00
Cable, Touchscreen, Interface, UV1700 012-0599-00
Cable, Touchscreen, Interface, 25' 012-0599-20
CHASSIS COMPONENTS:
Standoff, 4-40 X 1.35" L, Hex, Ault Power Supply - the standoffs on
the power connector to the monitor. 361-0201-00
Bezel Assy, Front, 90387 - assembly includes 202-0021-01 (Door, Module
Housing, 90485), 203-0046-00
(Bezel, 4 Bay Module Housing, 90491), 214-0491-00 (Spring, Torsion,
Door), 306766-001, (Pin, Hinge,
Module Cage), 331-0030-00 (Lens, Light Pipe), 333-0441-00 (Panel,
Vent, Bezel Assy, 90387), and 3440058-
00 (Clip, Retention, Module Door)
203-0049-00
Panel, CPU - I/O Drawer, MIDI, 90387 333-0440-00
Panel, Rear, 90387 333-0442-00
Label, Model #, Serial #, Options, S 334-1261-00
Foot, Round, .600" Dia, Santoprene 348-0205-00
Handle, Aluminum 367-0020-00
Chassis, 90387/91387 Note: Service parts still stocks a small number
of 441-0077-00 chassis to support
the early version 90387 that required an additional card guide.
Replace “like-for-like”.
441-0077-02
Support, Foot, 90491 386-0237-00
Divider, 4 Bay Module Housing, 90491 426-0048-00
Enclosure, Left Half, 90491 437-0126-02
Enclosure, Right Half, 90491 437-0126-03
Stud, Ground, Equal Potential 355-0001-00
Post, Support, PCB, Nylon 129-0098-00
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
Mounting Holster, 90387 Power Supply 016-0511-00
PCMS / PCIS Modules - Common Parts
Module Extender Ribbon Cable 175-0360-00
Case Screws (the long ones that hold the case halves together).
358268-094
15-Pin SDLC Connectors For Most Modules (Conn, D Sub, 15 Pin,
W/Inserts) – Check Service Manual to be
sure which connector is needed.
354587-004
15-pin SDLC connectors for the 90470 p/n 670-0432-08 CPU board and
90496 CPU (shorter connector). 131-0904-00
Metal Module Side Cover (1 cover) for most modules – Check Service
Manual to be sure which cover is
needed.
306982-001
Mylar Shield for Module Covers - has adhesive on one side (-00 has no
adhesive). 342-0024-01
2-Pin PCBA Jumper Connector - for making jumper settings on most
boards 131-0993-00
S/W Version Label 306772-001
OBS 3.5 mm HLO Plug (for use with HLO jack on older modules)
354660-001
TT-253 (.173") HLO Plug (for use with HLO jack on current modules), 3
conductor with screw terminals. 354171-001
Pin, Dowel (for pull handle) 214-0254-00
Spring, Torsion (for pull handle) 306966-001
Latch, Module 306965-001
Pull Handle 367-0016-00
Basic Pull Handle Label - Blue 334-0267-02
ECG Pull Handle Label - Red, With Leadwire Warning (for 90470 & 90418)
334-1247-00
NIBP Pull Handle Label - Yellow NIBP Warning (Label, Warning, Module,
NIBP, English (new warning label for
NIBP modules, reads “WARNING: Connection to a vascular access can
result in injury or death”)
334-5410-00
NIBP Hose Label - Yellow NIBP Warning (Label, Warning, Hose, NIBP,
English (new warning label for NIBP
hoses, reads “WARNING: Connection to a vascular access can result in
injury or death”)
334-5409-00
Luer to Slip Fit Adapter Kit, Adult NIBP
Used to permanently install a slip-fit type adapter to all Spacelabs
Adult NIBP modules with luer fittings,
including models 90351, 90426, 90429, 90465,90466, 90651A, and 90731.
714-0048-00
Luer to Slip Fit Adapter Kit, Infant NIBP
Used to permanently install a slip-fit type adapter to all Spacelabs
Infant NIBP modules with luer fittings,
including models 90351, 90426, 90430, 90465,90467, 90651A, and 90731.
714-0049-00
Adult NIBP Connector with Luer Fitting
NEED TO UPGRADE TO SLIP FIT CONNECTOR USING 714-0048-00 KIT
103-0023-00
DISC Adult NIBP Connector with Luer Fitting
NOT AVAILABLE – Replace using 103-0023-00 above
Infant NIBP Connector with Luer Fitting
NEED TO UPGRADE TO SLIP FIT CONNECTOR USING 714-0049-00 KIT
103-0008-00
DISC Dual Hose Threaded NIBP Connector (with valve stem)
NOT AVAILABLE
214-0014-00A
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
OBS
90402 Dual Pressure Module
Service Manual Part Number: 890402-001
ELECTRONIC ASSEMBLIES:
OBS Dual Press RUPI - OLD RUPI BOARD - order 306515-002 or 670-0588-00
below 306520-002
OBS Dual Press RUPI (PCBA, 8344 CPU, 2P ) - Pin Thru chips - may use
670-0588-00 306515-002 or 102
OBS PCB Assy, CPU, Dual Pressure - Surface Mount chips - may use
306515-002 670-0588-00
OBS PCBA, Dual Pressure (Analog Board) 306505-002
CHASSIS COMPONENTS:
OBS Front Panel Replacement Kit ( Kit, Sync Upgrade, Dual PRS)
040-0055-01
OBS Front Panel Assy 306944-201
OBS Label, Module Dual Pressure 334-0363-02
CABLES AND CONNECTORS:
OBS Cable Assy, ECG / Press Input 306626-001
OBS 90403 Pressure / Dual Temp Module
Service Manual Part Number: 890403-001
ELECTRONIC ASSEMBLIES:
OBS Press/Dual Temp Analog 306485-002
OBS Press/Dual Temp RUPI 306515-003 or 103
CHASSIS COMPONENTS:
OBS Front Panel Replacement Kit ( Kit, Sync Upgrade, PRS / 2 Temp,
90403) 040-0055-02
OBS 90404 Cardiac Output / Pressure Module
Service Manual Part Number: 890404-001
Note about 90404 generations - The 90404 module has gone through 3
versions: the 90409-09 (old), 9040419,
and 90404-09 (new). The 040-0248-00 conversion kit (listed below) adds
a piggyback memory board to
the 90404-09 (old) CPU to convert a 90409-09 to a 90409-19. The
90404-09 (new) has the additional
memory already on the CPU (670-0590-00).
ELECTRONIC ASSEMBLIES:
OBS CPU (listed as PCBA, 8344 CPU, CO / Hemo) - for 90404-09 (old)
306515-004 or 104
OBS CPU- for the 90404-19 module - includes the piggyback memory PCB
306515-204
OBS CPU (listed as PCBA, CPU, Cardiac Output / Pressure) - New Style
CPU used with 90404-09 (new) 670-0590-00
OBS Analog PCBA Service Kit - Order in place of Analog Aux PCBA
(306350-002) and/or Analog PCBA (306345002)
050-0118-00
OBS Analog Auxiliary Board 306350-002
OBS Cardiac Output Analog Board Set, 306350-306345, 90404 673-0088-00
CABLES AND CONNECTORS:
OBS Cable Assy, C.O. Input -NOTE: This cable is about 2" long. If
cable being replaced is about 4" long, order the
-002 version (below )
306654-001
OBS Cable Assy, ECG/Press Input 306626-002
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
CHASSIS COMPONENTS:
OBS Front Panel Replacement Kit (listed as Kit, Sync Upgrade, CO/PRS)
- Includes Front Panel Label. Front panel
used in this kit is 306944-202 (below).
040-0055-03
OBS Front Panel (For Modules with LED offset to right of the HLO jack)
-Front Panel ONLY 306944-202
OBS Front Panel Label (For Modules with LED offset to right of the HLO
jack) -Front Panel Label ONLY 334-0365-02
OBS Front Panel (For Older Modules with LED directly above the HLO
jack) - Front Panel ONLY - Replaced by
306944-202 (above).
306944-002
OBS Front Panel Label (For Older Modules with LED directly above the
HLO jack) -Front Panel Label ONLY 306990-003
OBS 90405 NIBP Module
Service Manual Part Number: 890405-001
ELECTRONIC & PNEUMATIC ASSEMBLIES:
OBS NIBP PCBA 306535-001
OBS NIBP Air Pump - NO LONGER AVAILABLE, LISTED FOR REFERENCE ONLY
384287-002
OBS Front Panel NIBP Hose Connector 214-0014-00A
OBS Connector on Cuff Hose, Quick Disconnect, .125, Brass (Alt part =
354524-001) 131-0053-00A
OBS NIBP Over-Press Switch 306528-001
OBS NIBP Deflate Button 362118-001
OBS NIBP Deflate Switch 380245-001
CHASSIS COMPONENTS:
OBS Kit, Front Panel Replacement, 90405 - Includes Front Panel Label
(306989-003), Front Panel (306979-203),
Pull Handle (367-0016-00), Module Latch (306965-001), Spring
(306966-001), Pull Handle Label (334-026702),
Pin (358812-001), and Spring (306977-001)
040-0338-00
OBS 90406 Capnography Module
Used with the 1890-02/-03 Airway Sensor
Service Manual Part Number: 890406-001
ELECTRONIC ASSEMBLIES:
OBS Capnograph CPU 306515-005
OBS Capnograph Analog 308270-001
OBS Bench Assy 369009-012
CHASSIS COMPONENTS:
OBS Kit, Front Panel Replacement, 90406 040-0337-00
OBS 90407 Multi-Lead ECG Module
90407 Options List:
Note: the 90407 & 90408 are essentially the same module; the 90407 has
enhanced Electrosurgical
Interference Suppression (ESIS), the 90408 does not.
Option -01 = ST Segment Analysis
Option -07 = Adult Respiration
Option -05 = ArrhythmiaNet 1
Option -06 = ArrhythmiaNet2
Option -20 = ECG/ESIS/MultiView I
Option -21 = ECG/ESIS/MultiView II
Service Manual Part Number: 890407-001
ELECTRONIC ASSEMBLIES:
OBS CPU (80186) 306300-110/210
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
OBS Multi-Lead Analog (for modules where the Front Panel Connector =
P1) 306305-001
OBS Multi-Lead Analog (for modules where the Front Panel Connector =
P4) 306305-002
OBS Analog PCB 306715-002
OBS Multi-Lead Pacer 308025-001
CABLES AND CONNECTORS:
OBS Cable, Sync Jack 175-0354-00
OBS Cable Assy ECG/Press Input 306626-002
CHASSIS COMPONENTS:
OBS Front Panel Replacement Kit (Kit, Sync Upgrade, ECG M-L) (90407)
040-0055-12
OBS Front Panel Replacement Kit (Kit, Sync Upgrade, Arr1/ESIS)
(90407-05, Arrhythmia 1) 040-0055-07
OBS Front Panel Replacement Kit (Kit, Sync Upgrade, Arr3/ESIS)
(90407-06, Arrhythmia 2) 040-0055-10
OBS Assy, Front Subpanel, Single ECG 306943-201
OBS Panel, Rear, Module 306981-002
OBS Label, Module (ECG ESIS) 306988-126
OBS 90408 Multi-Lead ECG Module
90408 Options List:
Note: the 90407 & 90408 are essentially the same module; the 90407
features Electrosurgical Interference
Suppression (ESIS), the 90408 does not.
Option -05 = Arrhythmia 1
Option -06 = Arrhythmia 3
Option -07 = Adult Respiration
Option -08 = Adult Respiration w/Varitrend
Option -15 = ArrhythmiaNet I (ST)
Option -16 = ArrhythmiaNet II
Option -20 = MultiView I
Option -21 = MultiView II
Service Manual Part Number: 890407-001
ELECTRONIC ASSEMBLIES:
OBS ECG 80186 CPU 306300-210
OBS Analog PCB, Old (PCBA, ECG MULTI-LEAD) Pin-Thru 306305-001/003
OBS Analog PCB, New - Surface Mount 670-0236-01
CABLES AND CONNECTORS:
OBS Cable, Sync Jack 175-0354-00
OBS Cable Assy ECG/Press Input 306626-002
CHASSIS COMPONENTS:
OBS Front panel Replacement Kit -Includes Label & Sync Jacks
040-0055-04
OBS Front panel Replacement Kit - Includes Label & Sync Jacks -
90408-07 (Resp) 040-0055-05
OBS Front panel Replacement Kit - Includes Label & Sync Jacks -
90408-05 (ESIS) 040-0055-06
OBS Front panel Replacement Kit - Includes Label & Sync Jacks -
90408-05-07 040-0055-08
OBS Front panel Replacement Kit - Includes Label & Sync Jacks -
90408-06 (Arry 3) 040-0055-09
OBS Front panel Replacement Kit - Includes Label & Sync Jacks -
90408-06-07 040-0055-11
OBS Front Panel only 306943-201
OBS
90409 Dual Channel Bedside Recorder
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
ELECTRONIC ASSEMBLIES:
Service Manual Part Number: 890409-001
OBS OEM Recorder, Thermal Print Head, 50 mm Gen/Scan Printhead - for
90323 366181-005
OBS Power Supply 366173-001
OBS LED Display PCBA 308235-001
OBS Power Switch (PCB Assy, AC Switch) 670-0425-01
OBS Recorder Controller (RCU) 670-0294-00
CHASSIS & MECHANICAL COMPONENTS:
OBS Tear Bar With Brushes 119-0050-00
OBS Drive Roller 119-0044-00
OBS Door Assembly - the paper drawer that pulls out and has the paper
spindle 614-0025-00
OBS Timing Belt - old thin belt 214-0099-00
OBS Timing Belt - new thicker belt - 10 tooth 019-0121-00
OBS Timing Belt Upgrade Kit (10-tooth motor pulley for New Belt)
401-0006-00
OBS 90415 Remote Module Housing
Service Manual Part Number: 070-0056-01
ELECTRONIC ASSEMBLIES:
OBS PCBA, Motherboard, Mod, Remote Housing 308070-001
OBS Bottom Fan Assy, PC1/PC Remote 306618-002
OBS OEM Power Supply 366191-001
CABLES AND CONNECTORS:
OBS Cable Harness, Power. Supply 308093-001
OBS Cable Harness, Rear Panel 308094-001
OBS Cable, Internal SDLC 308073-101
OBS Cable, Internal H/L Output 308074-101
CHASSIS COMPONENTS:
OBS Frame, P/S Remote Mod. Housing 308088-002
OBS Bracket, PCBA 1 308089-002
OBS Bracket, PCBA 2 308090-002
OBS Holder, Battery 308091-002
OBS Rear Panel, Remote Mod 308080-003
OBS Cover Remote Mod Housing Alpha 308081-003
OBS Front Bezel Remote 308082-002
OBS Bulkhead, Backplane 308086-002
OBS Cage, Mod, Remote Mod. Housing 308083-002
OBS Divider, Center 308084-001
OBS Divider Bottom 308085-002
OBS Holder, Filter 308092-001
OBS Air Filter Fan, Remote. Mod. Housing 306952-002
OBS Pin Hinge Module Cage 306766-001
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
OBS Spring Torsion (Door) 306767-001
OBS Door, Module Cage 202-0014-01
OBS Battery, 4v Rechargeable 384417-001
OBS 90418 Multi-Lead ECG / Resp Module
90418
Option -05 = ArrhythmiaNet 1
Option -06 = ArrhythmiaNet 2
Option -07 = Adult/Infant Respiration
Option -08 = Respiration and Varitrend Plus
Option -09 = Respiration and Varitrend 3
Options List:
Option -15 = ArrhythmiaNet I
Option -16 = ArrhythmiaNet II
Option -17 = ST Segment Analysis
Option -20 = MultiView 1
Option -21 = MultiView 2
Service Manual Part Number: 070-0171-00
ELECTRONIC ASSEMBLIES:
OBS ECG 80186 CPU --- Note: different CPU PN may have HLO jacks in
different location, be sure to order likefor-
like replacement.
306300-200/210
OBS PCB Assy, Multilead ECG 670-0236-01
OBS PCBA, Respiration 306360-001
CABLES AND CONNECTORS:
OBS Cable, ECG, HLO, EMI 175-0773-00
OBS Cable Assy ECG/Press Input 306626-002
CHASSIS COMPONENTS:
OBS Front Panel Kit, 90418 (with ECG cable and pull handle installed,
includes HLO jacks) 040-0055-04
OBS Front Panel, Single ECG 306943-201
OBS Panel, Rear, Module 306981-003
OBS Front Panel Label, Module (ECG, Multi ECG) 306988-122
OBS Front Panel Label, ECG / ARRNET II 334-0362-02
OBS Front Panel Label, Module ECG/Resp 334-0361-02
OBS Label, Module, ECG 334-0356-02
OBS Label, Module, ECG Multiview, 90418 334-0517-00
OBS Label, Module Latch-Leadwire Warning 334-1247-00
OBS Latch, Module 306965-001
OBS Handle, Module (replaces 306964-001) 367-0016-00
OBS Spring, Torsion 306966-001
OBS Pin, Dowel 358812-001
OBS 90419 Pulse Oximetry Module
Service Manual Part Number: 070-0063-01
ELECTRONIC ASSEMBLIES:
OBS Pulse Oximetry Board 308180-001
OBS Pulse Oximetry PCBA, RS-232 308185-003
CABLES AND CONNECTORS:
OBS Cable Assy, Pulse Ox Input 175-0407-00
CHASSIS COMPONENTS:
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
OBS Front Panel 306979-202
OBS Label, Module, Front Panel, Pulse Oximetry 306988-032
OBS Label, Front Panel 306988-012
OBS Spring, Helical, Compression 306977-001
OBS Latch Module 306965-001
OBS Handle, Module 367-0016-00
OBS Spring, Torsion 306966-001
OBS Pin, Dowel 358812-001
OBS Label, Module, Pull Handle 334-0267-02
OBS Cable Assy, Pulse Ox .Input 175-0407-00
OBS Bushing, Front Panel Connector 358-0004-00
OBS 90419-01 Pulse Oximetry Module
Service Manual Part Number: 070-0230-00
ELECTRONIC ASSEMBLIES:
OBS PCBA, Pulse Oximetry 308180-002
OBS Pulse Oximetry RS-232 Board 308185-003
CABLES AND CONNECTORS:
OBS Cable Assy, Pulse Ox Input (Cable Assy, Pulse Ox Input,
Superbright) 175-0564-00
OBS Bushing, Front Panel Connector 358-0004-00
CHASSIS COMPONENTS:
OBS Front Panel Replacement Kit 040-0335-00
OBS Front Panel 306979-202
OBS Label, Front Panel 306988-032
90424-01 Sv02 Module
Service Manual Part Number: 070-0356-00
ELECTRONIC ASSEMBLIES:
PCB Assy, SvO2 Digital 670-0444-00
PCB Assy, SvO2 Analog 670-0443-01
CABLES AND CONNECTORS:
Cable Assy, SvO2 Input (Front Panel Connector) 175-0570-00
CHASSIS COMPONENTS:
Kit, Front Panel Replacement, 90424-01 - includes label & assembled
connectors 040-0334-00
OBS 90427 Multi-Lead ECG / Resp / ESIS Module
90427 Options
Option -05 = ArrhythmiaNet 1
Option -06 = ArrhythmiaNet 2
Option -07 = Adult/Infant Respiration
Option -08 = Respiration and Varitrend Plus
Option -09 = Respiration and Varitrend 3
List:
Option -15 = ArrhythmiaNet I
Option -16 = ArrhythmiaNet II
Option -17 = ST Segment Analysis
Option -20 = MultiView 1
Option -21 = MultiView 2
Service Manual Part Number: 070-0171-00
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
ELECTRONIC ASSEMBLIES:
OBS CPU 306300-210
OBS Analog PCB (PCB Assy, Multilead ECG) 670-0236-01
OBS Shield, ESIS 306308-002
OBS Shield, Module 306983-002
OBS Shield, Electrical, M-L ECG Front End 337-0077-00
CABLES AND CONNECTORS:
OBS Cable Assy ECG/Press Input 306626-002
OBS Cable, Sync Jack 175-0354-00
CHASSIS COMPONENTS:
OBS Assy, Front Subpanel, Single ECG 306943-201
OBS Panel, Rear, Module 306981-002
OBS Label, Front Panel, ECG/ESIS Module 334-0359-02
OBS Label, Module S/W Versions 306772-001
OBS Label, Module Ident.-En/Fr/Gr 334-0805-00
OBS 90425 / 90428 / 90432 "Double High" Multi-Parameter Modules
Options List: Option -01 = ArrhythmiaNet/ST
Option -02 ESIS/ST (not for 90428)
Option -06 = ArrhythmiaNet 2
Option -20 = MultiView 1
Option -21 = MultiView 2
Service Manual Part Number: 070-0144-00
ELECTRONIC ASSEMBLIES:
OBS CPU 670-0251-05
OBS ROM Pack 670-0252-00
OBS Analog PCB, 90425 672-0087-00
OBS Analog PCB, 90428 672-0088-00
OBS Analog PCB, 90432 672-0094-00
CHASSIS COMPONENTS:
OBS Front Panel Assy, 2 High Module, 90425 614-0028-10
OBS Front Panel Assy, 2 High Module, 90428 614-0036-10
OBS Front Panel Assy, 2 High Module, 90432 614-0035-10
OBS 90426 / 90429 / 90430 NIBP Modules
Module Descriptions: 90426 = Adult / Infant NIBP
90429 = Infant NIBP only
90430 = Adult NIBP only
Service Manual Part Number: 070-0177-01
ELECTRONIC & PNEUMATIC ASSEMBLIES:
OBS PCBA, NIBP, 90426 Surface Mount – w/Pneumatics, No Pump on board
670-0563-00
OBS PCBA, NIBP, 90426 - Universal NIBP, Adult/Infant NIBP –
w/Pneumatics, No Pump on board 670-0334-02
OBS PCBA 90426 - PCB Assy, Universal NIBP w/Pneumatics & Pump,
Adult/Infant NIBP 671-0538-00
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
OBS NIBP Pump For 671-0538-01 NIBP Board, Above 119-0247-00
OBS PCBA 90426 German 670-0680-00
OBS PCBA, NIBP, 90429 Surface Mount – w/Pneumatics, No Pump on board
670-0564-00
OBS PCBA 90429 - PCB Assy, Neonate NIBP – w/Pneumatics, No Pump on
board 670-0382-01
OBS PCBA 90429 - PCB Assy, Neonate NIBP w/Pneumatics & Pump (also used
in 90351) 671-0537-00
OBS PCBA, NIBP, 90429 German 670-0681-00
OBS PCBA, NIBP, 90430 - Feed-Thru Components, w ith Pneumatics, no
pump on board, has Safety Timer switch 670-0383-01
OBS PCBA 90430 Surface Mount - PCB Assy, Adult NIBP, Surface Mount
with Pneumatics, no pump on board,
has Safety Timer switch
670-0565-00
OBS PCBA 90430 - PCB Assy, Adult NIBP w/Pneumatics & Pump (also used
in 90351) 671-0536-00
OBS PCBA, NIBP, 90430 German 670-0682-00
OBS Adult NIBP Connector (Adapter, Female Luer To Bulkhead, Sav-R
Thread) 103-0023-00
OBS Infant NIBP Connector (Adapter, Luer Lock, Male, To Bulkhead)
103-0008-00
OBS Black Spacer Ring for Adult & Infant NIBP Connectors 361-0011-00
OBS Deflate Switch, S2 380245-001
OBS Deflate Switch Cap, Red 201-0017-00
OBS Green LED, Superbright, W/ PC Mount 150-0051-00
OBS Valve, Solenoid, 12v, 0.5w,10 PSI 214-0231-00
OBS NIBP Pump Assy ( Pump, Install Instructions, & Check Valve )
-Versions With CANON PUMP Mounted On
Module Cover
040-0475-01
OBS NIBP Pump Assembly For Versions With Oken Pump Mounted On Module
Cover:
* Pump Assy (ST),
NIBP.........................................................................................................................
* Cushion, Rubber, Oken Pump Mounting
.............................................................................................
* Bracket, NIBP Pump Mounting (pump tie-wrapped to this part)
.........................................................
* Tie Wrap, 8”
.......................................................................................................................................
* Module Cover, with mounting screws for NIBP
Pump.........................................................................
* Module Cover (the other half)
...........................................................................................................
119-0087-01
119-0088-04
348-0130-00
407-0206-00
334-0038-00
306982-002
306982-003
OBS NIBP Pump For 671-0537-00 NIBP Board, Above 119-0214-00
OBS NIBP Pump For 671-0536-00 NIBP Board, Above 119-0214-00
OBS * Fitting, Elbow, Barbed, For 3/32 ID Tubing (Item 9 On The
Service Manual Pneumatic Assy Drawing) 214-0349-00
OBS * Fitting, Junction, 1/16x3/32x3/32x1/8 (White 4-way manifold
piece used instead of elbow and T
connectors on later 90426/429/430 Modules)
214-0243-00
OBS 4-way Junction Fitting, 3/32-3/32-1/8-1/8 - For 2 Tubing Sizes
214-0161-00
OBS 4-Way Fitting, Junction, 1/16x3/32x3/32x1/8 - For 3 Tubing Sizes
214-0243-00
CHASSIS COMPONENTS:
OBS Kit, Front Panel Replacement, 90426 / 429 / 430. Includes Front
Panel, Handle w/Label, Latch, Springs,
Dowel Pin, and Tie Wrap. NOTE: Front Panel Label is not included.
040-0333-00
OBS Front Panel Label for 90426 (Label, Universal NIBP) Adult/Infant
NIBP 334-0277-02
OBS Front Panel Label for 90429 (Label, Infant NIBP) 334-0210-03
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
OBS Front Panel Label for 90430 (Label, Adult NIBP) 334-0366-02
OBS Cover Module, Pump NIBP (metal side cover that the NIBP pump motor
mounts on) 306982-002
OBS Cover, Module (metal side cover that does NOT have NIBP pump motor
mount) - ALSO NEED TO ORDER
Module Cover Insulator, below.
306982-001
OBS Insulator, Module Cover -- Needed for 306982-001, above
342-0024-01
OBS Pump Mounting Bracket (metal piece that covers pump) 407-0114-01
OBS Pump Mounting Bracket Plate - attaches Pump to Module Cover
386-0094-00
OBS Cushion, Rubber, Pump Mounting 348-0105-00
OBS
90431 Remote Module Housing
(15-Pin SDLC, PC2 / 90308 Vintage)
Service Manual Part Number: 070-0222-00
ELECTRONIC ASSEMBLIES:
OBS Backplane Board 670-0326-03
OBS SDLC connector on Backplane board 354640-015
CHASSIS COMPONENTS:
OBS Bezel Assy 614-0034-00
OBS Door 202-0012-01
OBS Pin, Hinge, Module Cage 306766-002
OBS Spring, Torsion (Door) 306767-002
OBS Cover, Remote. Module. Housing, Left 200-0082-09
OBS Cover, Remote. Module. Housing, Right 200-0082-10
OBS Divider, Module Enclosure 426-0033-01
OBS Spring, Grounding (curved leaf spring in bottom/top of module
slots) 214-0206-05
90449 Bedside Modular Recorder
Service Manual Part Number: 070-0358-00
ELECTRONIC ASSEMBLIES:
Recorder, Thermal, Module, General Scanning – comes installed in new
module housing and new front/rear
panels -everything but the RCU. Must also order the 2 Rear Panel
Labels (not included).
010-0197-03
Printhead Assy, 90449 019-0406-00
Interface Board (RCU) 670-0471-00
Front Membrane Switch Panel for 90449 and 90469 Module Recorders
019-0405-00
CHASSIS COMPONENTS:
Label Module Rear 306976-001
Label, Module S/W Versions 306772-001
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
019-0111-00
Idler Roller
90449 PAPER TRAY PARTS
Complete Paper Tray: 010-0380-00
O
TOP VIEW
019-0115-00
Spring
019-0118-00
Swing Arm
019-0110-00
Paper Guide
019-0116-00
Static Brush
019-0114-00
Bushing (2, one at
each end)
019-0113-00
Gear, 13 T019-0112-00
Roller
ROLLER DETAIL
019-0117-00
Felt Pad
PAPER TRAY PARTS:
Complete Paper Tray 010-0380-00
Roller 019-0112-00
Roller Gear 019-0113-00
Roller Bushing (two needed) 019-0114-00
Paper Guide 019-0110-00
Swing Arm 019-0118-00
Swing Arm Spring 019-0115-00
Idler Roller 019-0111-00
Static Brush 019-0116-00
Felt Pad 019-0117-00
adultNIBP
neonatalNIBP
SpO2
DEFLATE
90465/90466/90467
NIBP/Sp02 Modules
Service Manual Part Number:
070-0376-00 -OR- 070-0376-01 (see notes with NIBP Board listings,
below)
Module Descriptions: 90465 = Adult / Infant NIBP, with Sp02
90466 = Infant NIBP only, with Sp02
90467 = Adult NIBP only, with Sp02
ELECTRONIC & PNEUMATIC ASSEMBLIES:
NIBP Pump - for use with Original NIBP Boards, 670-0582-00,
670-0675-00, and 670-0674-00 119-0175-02
NIBP Pump - for use with NIBP Boards 671-0541-00 / -02, 671-0539-00 /
-02, and 671-0540-00 / -02 119-0214-00
PCB Assy, Universal NIBP, Sa02 Interface - Original Board (note: this
board is covered by Service Manual
part number 070-0376-00)
670-0582-00
NIBP Board 90465, Adult / Neonatal NIBP - New board (note: this board,
and also the -02 version below, is
covered by Service Manual part number 070-0376-01)
671-0541-00
NIBP Board 90465 - improved New board - with s/w version 1.04.16 or
greater ONLY 671-0541-02
PCB Assy, Neonatal NIBP, Sa02 Interface - Original Board (note: this
board is covered by Service Manual
part number 070-0376-00)
670-0675-00
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
NIBP Board 90466, Neonatal NIBP - New board (note: this board, and
also the -02 version below, is covered
by Service Manual part number 070-0376-01)
671-0540-00
NIBP Board 90466 - improved New board - with s/w version 1.04.16 or
greater ONLY 671-0540-02
NIBP Board 90467, Adult NIBP, Sa02 Interface - Original Board (note:
this board is covered by Service
Manual part number 070-0376-00)
670-0674-00
NIBP Board 90467, Adult NIBP - New board (note: this board, and also
the -02 version below, is covered by
Service Manual part number 070-0376-01)
671-0539-00
NIBP Board 90467 - improved New board - with s/w version 1.04.16 or
greater ONLY 671-0539-02
Valve, Solenoid, 12V, 0.5W, 10 PSIG 214-0231-00
Over Press Switch, Adult 260-0040-00
Over Press Switch, Neonatal, 175 260-0041-00
Deflate Switch on all 90465/66/67 NIBP Boards (Switch, Push, Mon.
SPST, Right Angle) 380245-001
Deflate Switch Cap, Red 201-0017-00
SpO2 Board (NOTE: -03 requires SpO2 s/w 3.03.55 + NIBP 1.03.55 or
above. Order the same part number
that you are replacing).
670-0491-01 or
-03
CABLES AND CONNECTORS:
SpO2 Front Panel Connector & Cable Assy, Multi Sensor 175-0649-02
Loctite #425 (for use when installing SpO2 connector nut) 252-0141-00
Cable Assy, NIBP - Sp02 175-0745-00
CHASSIS COMPONENTS:
Front Panel Replacement Kit, 90465 - NIBP fittings not included, move
original fittings to new front panel. 050-0418-00
Front Panel Replacement Kit, 90466 - NIBP fittings not included, move
original fitting to new front panel. 050-0419-00
Front Panel Replacement Kit, 90467 -NIBP fittings not included, move
original fitting to new front panel. 050-0420-00
Front Panel, Module, Pulse Ox / NIBP -Front panel ONLY - label, pull
handle, connectors, and other parts
ordered separately, or order front panel kit above.
306979-205
Spring, Helical, Compression 306977-001
Latch Module 306965-001
Handle, Module 367-0016-00
Spring, Torsion 306966-001
Pin, Dowel 358812-001
Label, Module, Pull Handle 334-0267-02
Label, Module, Front Panel, 90465, Adult / Neonatal NIBP 334-0646-02
Label, Module, Front Panel, 90466, Neonatal NIBP 334-0782-00
Label, Module, Front Panel, 90467, Adult NIBP 334-0781-00
Cap, Switch, Red 201-0017-00
90469 2/4 Channel System Printer Module
Service Manual Part Number: 070-0441-00
ELECTRONIC ASSEMBLIES:
PCB Assembly - Logic Board NOTE: -01 required for s/w version
1.01.02CO and above. 019-0220-01
Front Membrane Switch Panel for 90449 and 90469 Module Recorders
019-0405-00
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
CABLES AND CONNECTORS:
Test SDLC Extender Cable - Required to perform module performance
tests 175-0865-00
Membrane Switch Cable 019-0217-00
90469 Parts:
Printhead 019-0221-00
Chassis Assy - Includes Membrane Switches, Labels, Pull Handle, etc.
019-0215-00
Motor Assembly 019-0218-00
Paper Path Cover 019-0219-00
Stainless Steel Cover 019-0222-00
Sub-Frame 019-0223-00
Trigger Assy 019-0224-00
2 Channel Roller Replacement Kit 050-0359-00
2 Channel Paper Tray - Complete 010-0679-00
4 Channel Roller Replacement Kit 050-0360-00
4 Channel Paper Tray – Complete 010-0680-00
90470 Multiparameter Module
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
90470 Options
Basic 90470 = ECG, 2 Invasive Pressures, 2 Temps
Option -01 = ECG only
Option -02 = ECG, 2 Temps
Option -04 = 2 Invasive Pressures, 2 Temps
Option -05 = Cardiac Output, 2 Pressures, 2 Temps
Option -06 = ECG, 1 Invasive Pressure, 2 Temps
List:
Option -10 = ECG, Cardiac Output, 2 Pressures, 2
Temps
Option -07 = Adult/Infant Respiration
Option -08 = Respiration and Varitrend Plus
Option -09 = Respiration and Varitrend 3
Option -20 = MultiView 1
Option -21 = MultiView 2
Service Manual Part Number: 070-0362-02
ELECTRONIC ASSEMBLIES:
CPU Board 670-0432-08
Rear Panel SDLC Connector, DA15-M , PCB Mount – for -07 or -08 CPU
ONLY 131-0904-00
Rear Panel SDLC Connector, DA15-M , PCB Mount – for -00 thru -03 CPUs
ONLY 354587-004
PCBA, ECG / RESP, 90470 NOTE: The -00 is One-Way Compatible with the
-02 ONLY by ordering part
number 655-0630-00, below.
670-0452-00
PCBA, ECG / RESP, 90470 - This part number includes the 670-0452-02
ECG Resp Board with EMI and ESIS
shields installed. Note: use this number, NOT 670-0452-02, unless you
are replacing a 670-0452-02 ECG /
Resp Board.
655-0630-00
PCBA, ECG / RESP, 90470 -Note: use this number ONLY if replacing
another -02 ECG / Resp Board. DOES
NOT include the EMI and ESIS shields, which must be moved from the old
-02 board.
670-0452-02
PCB Assy, ECG / Resp 670-0452-05
Isolation PCBA - NOTE: does NOT support PCB Assy, 2 Pressure / 2 Temp
with part number 670-0604-01 or
higher. Order the same part number you are replacing.
670-0451-00
Isolation PCBA - NOTE: does NOT support PCB Assy, 2 Pressure / 2 Temp
with part number 670-0604-00.
Order the same part number you are replacing.
670-0451-02/03
PCB ASSY, BP/TEMP/CO 670-0420-00/01
PCB Assy, 2 Pressure / 2 Temp - NOTE: Requires Isolation board
670-0451-00 or -01, will NOT work with
Isolation Boards 670-0451-02 or -03. Order the same part number you
are replacing.
670-0604-00
PCB Assy, 2 Pressure / 2 Temp - NOTE: Requires Isolation board
670-0451-02 or -03, will NOT work with
Isolation Boards 670-0451-00 or -01. Order the same part number you
are replacing.
670-0604-05
PCB Assy, 2 Pressure / 2 Temp / Cardiac Output (for 90470-05)
670-0605-05
2 Pressure / 2 Temp / Cardiac Output, ECG PCBA (for 90470-10)
670-0894-00
Two-Pressure Adapter Cable for 90470-10 012-0551-00
Dummy ECG Board (for 90470's without ECG) 670-0606-00
Shield, ECG, Lower 337-0139-00
Shield, ECG, Upper 337-0140-00
CABLES AND CONNECTORS:
Cable Assy ECG/Press Input - Cable from front panel ECG connector to
ECG board 306626-001
Cable Assy ECG/Press Input - Cable from front panel Pressure
connectors to BP / Temp board 306626-002
Cable Assy, Temperature, Short - Cable from Left front panel temp
connector to BP / Temp board 175-0636-00
Cable Assy, Temperature, Long - Cable from Right front panel temp
connector to BP / Temp board 175-0635-00
Cable, Press1 / Press2, Adaptor - For 90470-10, to allow connection of
two invasive pressures. 012-0551-00
CHASSIS COMPONENTS:
Panel, Front, 90470 -Just the front panel 333-0225-02
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
Panel, Rear, 90470 333-0226-02
Kit, Front Panel Replacement, 90470 - Front Label not included
040-0332-00
Kit, Front Panel Replacement, 90470-01 - Front Label not included
050-0115-00
Kit, Front Panel Replacement, 90470-02 - Front Label not included
050-0116-00
Kit, Front Panel Replacement, 90470-04 - Front Label Included
050-0117-00
Kit, Front Panel Replacement, 90470-05 - Front Label Included
050-0112-00
Kit, Front Panel Replacement, 90470-06 - Front Label not included
050-0114-00
Kit, Front Panel Replacement, 90470-10 - Front Label not included
050-0113-00
Label, Rear Panel, Module S/W Versions 306772-001
Label, Rear Panel, Model #, Serial # 306976-001
Front Panel Label for 90470 (ECG-Multiview, 2 Pressures, 2 Temps)
Without Respiration (any 90470 that
does not have option -07 or -08 or -09).
334-0514-01
Front Panel Label for 90470 (ECG-Multiview, 2 Pressures, 2 Temps) With
Respiration (any 90470 that
includes option -07 or -08 or -09).
334-0515-01
Front Panel Label for 90470-01 (ECG-Multiview Only) Without
Respiration (any 90470-01 that does not have
option -07 or -09).
334-0711-00
Front Panel Label for 90470-01 With Respiration (ECG/Resp/ Multiview)
(any 90470-01 that includes option 07
or -09.
334-0708-00
Front Panel Label for 90470-02 (ECG, 2 Temp) Without Respiration (any
90470-02 that does not have option
-07 or -09).
334-1057-00
Front Panel Label for 90470-02 (ECG/Resp/ Multiview) With Respiration
(any 90470-02 that includes option 07
or -09).
334-0996-00
Front Panel Label for 90470-04 (2 Pressures, 2 Temps) - Temps Labeled
as T3 & T4 334-0654-00
Front Panel Label for 90470-05 (CO, 2 Pressures, 2 Temps) 334-0655-00
Front Panel Label for 90470-06 Without Respiration (ECG, 1 Pressure, 2
Temps) (any 90470-06 that does
not have option -07 or -09)
334-1381-00
Front Panel Label for 90470-06 With Respiration (ECG/Resp/ Multiview
/1 Pressure, 2 Temps) (any 9047006
that includes option -07 or -09)
334-1530-00
Front Panel Label for 90470-10 (ECG-Multiview, CO, 2 Pressures, 2
Temps) 334-1971-00
Front Panel Label for 90470-10 (ECG-Multiview, CO, 2 Pressures, 2
Temps) With Respiration (any 90470-10
that includes option -07 or -08 or -09)
334-1972-00
Label, Module Latch - Red, With Leadwire Warning 334-1247-00
90478 Digital Telemetry
Receiver Module
90478 Options List:
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
Option A = Basic Arrhythmia alarms
Option B = MultiView 1
Option C = MultiView II
Option G = 430 - 442 MHZ operation (Germany, France, Switzerland,
Sweden, Norway)
Option I = 470 - 480 MHz operation (Italy, New Zealand)
Option J = 174-180 MHz VHF A Band operation, (TV Channel 7)
Option K = 180- 186 MHz VHF B Band operation, (TV Channel 8)
Option L = 186-192 MHz VHF C Band operation, (TV Channel 9)
Option M = 192-198 MHz VHF D Band operation, (TV Channel 10)
Option N = 198-204 MHz VHF E Band operation, (TV Channel 11)
Option O = 204-210 MHz VHF F Band operation, (TV Channel 12)
Option P = 210-216 MHz VHF G Band operation, (TV Channel 13)
Option Q = 608 - 614 MHz operation, UHF (TV Channel 37) WMTS
Option R = 455 - 460 MHZ operation (Great Britain)
Option S = ST segment analysis/review/trend
Option T = 602 - 608 MHz operation, UHF (TV Channel 36) WMTS
(1395-1400 MHz downconverted by
Multiband Active Antenna System)
Option U = 460 - 470 MHz operation, UHF (US PLMR band)
Option V = 614 - 620 MHz operation, UHF (TV Channel 38) WMTS
(1427-1431.5 MHz downconverted by
Multiband Active Antenna System)
Note: The 90478-Q module requires the use of the 90479-A telemetry
housing. 90478-Q receivers are
used with 90343-05 or 90347-05 transmitters, or the 90341-05 Narrow
Band transmitter.
Note: The 90478-Q, -T, and -V modules require the use of a 90479-A
telemetry housing. The 90478-V
receivers require the use of 90343-06 or 90347-06 transmitters, or the
91341-09 transmitter.
Service Manual Part Number: 070-0435-xx
COMMON ELECTRONIC ASSEMBLIES (See Options Parts for Option-Specific
Parts) :
Stubby Antenna (for UHF 460 - 470 MHz Receiver Modules) 117-0026-00
Stubby Antenna (for 608 - 614 MHz WMTS Receiver Modules) 117-0040-00
PCB Assy, CPU, 90478 670-0724-01
Digital Board (PCBA, DIGITAL TM MODULE, 608 MHZ)
NOTE: 670-0617-01 (PCB ASSY, DIGITAL, TM MODULE) is used ONLY with
older Option -U Modules. 6700617-
03 (PCBA, DIGITAL TM MODULE, 608 MHZ) is used with all others,
including recent -U Modules.
670-0617-03
PCB Assy, Antenna 670-0723-00
PCB Assy, Power Supply, TM Module 670-0619-00
Shield, CPU Board, 90478 337-0161-00
Shield/Spacer, Digital PWB, 90478x 337-0158-00
Gasket, EMI, BE-CU, 1.15" X 0.280"
OPTION-SPECIFIC PARTS :
Note 1: For most options, RF Board Assemblies are listed as the
primary part number. Where
listed, most RF boards (without the RF Filter unless noted otherwise)
CAN be ordered.
Note 2: The complete BOMs for the 650-xxxx-xx RF Receiver assemblies
are NOT given, but
where applicable the bandpass filter part numbers are given for
reference.
348-0074-01
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
Option G = 430 - 442 MHZ operation (Germany, France, Switzerland,
Sweden, Norway):
RF Board (ASSY, MDTM RF PCBA, 430-442 MHZ). NOTE: this RF Board part
number includes 378-0510-00
(Filter, Dual Bandpass, 430-442 MHZ, Band G)
670-0837-01
Option I = 470 - 480 MHz operation (Italy, New Zealand):
RF Board (ASSY, MDTM RF PCBA, 470-480 MHZ). NOTE: this RF Board part
number includes 378-0511-00
(DUAL BANDPASS, 470-480 MHZ, BAND I)
670-8824-01
Option J = 174-180 MHz VHF A Band operation, (TV Channel 7):
RF Board Assembly (SUBASSEMBLY, VHF A PCBA, TM MODULE), Includes:
670-0821-01 (PCBA, RF-VHF
LOW, TM MODULE) and 378-0097-00 (FILTER, DUAL BANDPASS, VHF A, 177
MHZ)
650-0461-00
Option K = 180- 186 MHz VHF B Band operation, (TV Channel 8):
RF Board Assembly (SUBASSEMBLY, VHF B PCBA, TM MODULE), Includes:
670-0821-01 (PCBA, RF-VHF
LOW, TM MODULE) and 378-0098-00 (FILTER, DUAL, BANDPASS, VHF B, 183
MHZ)
650-0459-00
Option L = 186-192 MHz VHF C Band operation, (TV Channel 9):
RF Board Assembly (SUBASSEMBLY, VHF C PCBA, TM MODULE), Includes:
670-0821-01 (PCBA, RF-VHF
LOW, TM MODULE) and 378-0099-00 (FILTER, DUAL, BANDPASS, VHF C, 189
MHZ)
650-0458-00
Option M = 192-198 MHz VHF D Band operation, (TV Channel 10):
RF Board Assembly (SUBASSEMBLY, VHF D PCBA, TM MODULE), Includes:
670-0821-01 (PCBA, RF-VHF
LOW, TM MODULE) and 378-0101-00 (FILTER, DUAL, BANDPASS, VHF D,195
MHZ)
650-0463-00
Option N = 198-204 MHz VHF E Band operation, (TV Channel 11):
RF Board Assembly (SUBASSEMBLY, VHF E PCBA, TM MODULE), Includes:
670-1203-01 (PCB ASSY, RFVHF
HI, TM MODULE) and 378-0102-00 (FILTER, DUAL, BANDPASS VHF E, 201 MHZ)
650-0462-00
Option O = 204-210 MHz VHF F Band operation, (TV Channel 12):
RF Board Assembly (SUBASSEMBLY, VHF F PCBA, TM MODULE), Includes:
670-1203-01 (PCB ASSY, RFVHF
HI, TM MODULE) and 378-0103-00 (FILTER, DUAL, BANDPASS, VHF F,207 MHZ)
650-0465-00
Option P = 210-216 MHz VHF G Band operation, (TV Channel 13):
RF Board Assembly (SUBASSEMBLY, VHF G PCBA, TM MODULE), Includes:
670-1203-01 (PCB ASSY, RFVHF
HI, TM MODULE) and 378-0104-00 (FILTER, DUAL, BANDPASS, VHF G, 213
MHZ)
650-0464-00
Option Q = 608 - 614 MHz operation, UHF (TV Channel 37) WMTS:
RF Board (ASSY, MDTM RF PCBA, 608-614 MHZ) ). NOTE: RF Board includes
378-0092-02 (FILTER, DUAL,
BANDPASS, 611 MHZ)
670-0933-01
Option R = 455 - 460 MHZ operation (Great Britain):
RF Board (ASSY, MDTM RF PCBA, 455-460 MHZ)
670-8825-01
Option T = 602 - 608 MHz operation, UHF (TV Channel 36, WMTS 1395-1400
MHz, downconverted by
Multiband Active Antenna system):
RF Board (ASSY, MDTM RF PCBA, 602-608 MHZ). NOTE: RF Board includes
378-0092-01 (FILTER, DUAL,
BANDPASS, 605 MHZ)
670-0973-05
Option U = 460 - 470 MHz operation, UHF (US PLMR band, also Australia
& Canada)
RF Board Assembly (SUBASSEMBLY, UHFUS PCBA, TM MODULE), Includes:
670-0618-04 (PCBA, RF, TM
MODULE), 378-0092-00 (FILTER, DUAL, BANDPASS, 465.3125 MHZ) ,
348-0242-00 EMI Gasket, and
associated hardware.
NOTE: the 670-0618-03 or above RF Board is ONLY suitable for customer
who already has the -03 or
above RF Board! The -00 and -02 RF Boards are no longer available and
are not physically compatible with
the -03 and higher - Replaced By the 650-0460-00 Kit listed here.
650-0460-00
Option V = 614 - 620 MHz operation, UHF (TV Channel 38, WMTS
1427-1431.5 MHz, downconverted by
Multiband Active Antenna system):
RF Board (ASSY, MDTM RF PCBA, 614-620 MHZ). NOTE: RF Board includes
378-0092-03 (FILTER, DUAL,
BANDPASS, 617 MHZ)
670-1306-06
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
CHASSIS COMPONENTS:
Kit, Front Panel, 90478 NOTE: Need to order front panel label
separately based on option (see below). 050-0364-00
Label, Front Panel, 90478 (Option G, 430 - 442 MHz) 334-1484-00
Label, Front Panel, 90478 (Option I, 470 – 480 MHz) 334-0806-00
Label, Front Panel, 90478 (Option R, 455 - 460 MHZ ) 334-1485-00
Label, Front Panel, VHF A, 90478 334-1233-00
Label, Front Panel, VHF B, 90478 334-1234-00
Label, Front Panel, VHF C, 90478 334-1235-00
Label, Front Panel, VHF D, 90478 334-1236-00
Label, Front Panel, VHF E, 90478 334-1237-00
Label, Front Panel, VHF F, 90478 334-1238-00
Label, Front Panel, VHF G, 90478 334-1239-00
Label, Front Panel, 90478 (Option -U ) 334-0806-00
Label, Front Panel, 608-614 MHz (Option -Q) 334-5551-00
Label, Front Panel, 1395-1400 MHz (Option -T) 334-5550-00
Label, Front Panel, 1427-1431.5 MHz (Option V) 334-5549-00
Panel, Front, 90478 333-0337-00
Panel, Rear, 90478 333-0355-00
Cover, Module, Dig TM 90478 200-0360-00
Latch Module 306965-001
Handle, Module 367-0016-00
Pin, Dowel, .094 Dia X .70 L 214-0254-00
Spring Torsion (Mod) 306966-001
Spring, Helical, Compression 306977-001
Label, Module Push Handle 334-0267-03
Label, Module S/W Versions 306772-001
90479 460 - 470 MHz Modular Telemetry
Receiver Housing
Service Manual Part Number: 070-0435-00 (Service Manual for Modular
Digital Telemetry)
ELECTRONIC ASSEMBLIES:
AC Input Module 119-0172-01
Power Supply -Do not order part number 670-0448-05. Order this kit
(Kit, Upgrade, Mains Fuse, 90479 /
90479A) -contains: 670-0448-05 (Power Supply), 159-0079-00 (Fuse, 2A,
250V, Slow, 5X20), 334-257900
(Label, Fuse Rating), and 077-0155-00 (Customer Bulletin, New Fuses)
050-0167-00
Power Distribution Board 670-0756-00
Battery Assembly (12v, 3.2 AH) 146-0039-00
RF Distribution Board (Dual Preamp Board) 670-0710-00
Backplane 670-0750-00
Fan - fits to 90479 Main Chassis assembly with 3/8” fan standoffs --
check size of standoffs before
ordering replacement fan.
306618-002
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
Fan - fits to 90479 Main Chassis assembly with 1” fan standoffs --
check size of standoffs before ordering
replacement fan.
650-0423-00
CABLES AND CONNECTORS:
External 9 Pin SDLC Cable Assy, Short 012-0187-00
Terminator Plug, 9 Pin SDLC 012-0507-01
CHASSIS COMPONENTS:
Module Divider 426-0034-01
Air Filter 650-0378-00
Cover, Decorative, 90479 200-0180-00
90479-A 608 - 614 MHz Modular Telemetry
Receiver Housing
Note: The 220 volt version of the 90479-A is the 90479-AX.
Service Manual Part Number: 070-0744-00 (Service Manual for Ultraview
Digital Telemetry)
ELECTRONIC ASSEMBLIES:
Dual Preamp Board 670-0710-01
Backplane PCB Assy, 90479 670-0750-00
Power Supply - Do not order part number 670-0448-05. Order this kit
(Kit, Upgrade, Mains Fuse, 90479 /
90479A) -contains: 670-0448-05 (Power Supply), 159-0079-00 (Fuse, 2A,
250V, Slow, 5X20), 334-257900
(Label, Fuse Rating), and 077-0155-00 (Customer Bulletin, New Fuses)
050-0167-00
Power Distributor Assy 670-0756-00
Battery, Assembly, 90479 146-0039-00
Fan - fits to 90479 Main Chassis assembly with 3/8” fan standoffs --
check size of standoffs before
ordering replacement fan.
306618-002
Fan - fits to 90479 Main Chassis assembly with 1” fan standoffs --
check size of standoffs before ordering
replacement fan.
650-0423-00
Module, AC Input, with Switch, Fuses, Filter 119-5068-00
Switch, Power 260-0021-00
Fuse, 2.5 A, 5x20 mm, Slo-Blo Metric 159-0036-00
CABLES AND CONNECTORS:
External 9 Pin SDLC Cable Assy, Short 012-0187-00
Cable, Assy, Dual Coax 175-0808-00
Cable, Assy, Battery 175-0810-00
Cable, Assy, LED 175-0814-00
Cable, Assy, SDLC 175-0813-00
Cable, Assy, HLO 175-0812-00
Terminator Plug, 9 Pin SDLC 012-0507-01
CHASSIS COMPONENTS:
Front Bezel, 90479 203-0040-00
Chassis, Main, 90479 441-0066-00
Panel, Rear, 90479 333-0356-00
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
Cover, Top, 90479 200-0181-00
Frame, Module Cage, 90479 426-0043-00
Plate, Access, Battery 386-0193-00
Door, Module Cage 202-0014-01
Pin Hinge Module Cage 306766-001
Spring Torsion (Door) 306767-001
Divider, Module Cage 426-0034-01
Filter Assembly, 90479 650-0378-00
Foot 348-0015-00
Spacer, Foot 361-0101-00
OBS 90480 EEG Module
90480 Options List: Option -A = Data Storage: 2 hrs. continuous, 11
snapshots
Option -B = Data Storage: 8 hrs. continuous, 44 snapshots
Option -C = Data Storage: 24 hrs. continuous, 44 snapshots
Service Manual Part Number: 070-0265-00
ELECTRONIC ASSEMBLIES:
OBS CPU 306300-110
OBS EEG Board, Two Channel 670-0476-00
CABLES AND CONNECTORS:
OBS Cable, Sync Jack 175-0354-00
OBS Cable Assy, ECG / Press Input 306626-002
CHASSIS COMPONENTS:
OBS Front Panel 306943-201
OBS Front Panel Label, EEG, Single Channel 334-0445-01
90481 EEG Module
Service Manual Part Number: 070-0578-00
ELECTRONIC ASSEMBLIES:
CPU Board (without software) 670-0665-00
PCBA, Front End, “Ernie” 670-0673-00
Adio Board, "Ernie" 670-0687-00
Front Panel PCBA 670-0761-00
PCBA, Flash Data Card - 32 MB 670-0737-00
PCBA, Flash Data Card - 4 MB 670-0738-00
CHASSIS COMPONENTS:
Front Panel, EEG 333-0354-01
Front Panel Label, EEG 334-0860-00
Rear Panel 306981-003
CABLES AND CONNECTORS:
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
Cable, HLO, EEG, Shielded 012-0495-00
90482 Bi-Spectral Index (BIS) Module
Service Manual Part Number: 070-0708-00
ELECTRONIC ASSEMBLIES:
PCB Assy, Front Panel 670-0891-00
PCB Assy, BIS Engine 670-0889-00
PCB Assy, CPU, 68302 670-0907-00
DSC-2, BIS Digital Signal Convert 010-1056-00
CABLES AND CONNECTORS:
Cable Assy, BIS Sensor - Order From Medical Supplies AM-186-0067
CHASSIS COMPONENTS:
Kit, Service, Front Panel Assy 050-0136-00
Front Panel Label, BIS 334-1956-00
Panel, Rear, Module 306981-003
Label, Module Options 334-2376-00
Label, Module Model & Serial Number 334-2374-00
Cover, Module Side 200-0176-00
90485 Remote Module Housing
Service Manual Part Number: 070-0680-01 or UCW Service Manual PN:
070-0470-01 (Rev B)
ELECTRONIC ASSEMBLIES:
PCBA, Module Bucket Backplane 670-0730-04
CABLES AND CONNECTORS:
Power Cord, Domestic, 120V, 10A, 18 AWG, 10' 161-0032-00
Cable Assy, AC Brick/SDLC With Power (cable from 90486 to 90485 module
housing) 012-0387-00
Cable Assy, SDLC With Power, Bucket-Bucket 012-0392-00
CHASSIS COMPONENTS:
Enclosure Assy, Left, 90485 644-0046-00
Enclosure Assy, Right, 90485 644-0047-00
Decorative Knob (Connector Nut Cover) 366-0023-01
Screw, Decorative, 8-32, Light Gray 212-0086-00
Enclosure Assy, Right, 90485 (includes doors) 644-0047-00
Enclosure Assy, Left, 90485 644-0046-00
Door, Module Housing, 90485 202-0021-01
Spring, Torsion (Door) 306767-001
Spring, Grounding 214-0358-00
Door Hinge Pin 306766-001
Chassis, Module Housing, 90485 441-0065-00
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
Cover, Rear Panel, Mod Housing, 90485 200-0179-00
Divider, Module Housing, 90485 426-0042-01
Label, Model / Serial / Option 334-0944-00
Label, CE Mark, 1.5" X 1", W/Number 334-1596-00
Label, CE Mark, 0.75 X 0.5", W/Num 334-1595-00
Label, TÜV Product Service, 22 mm 334-1643-00
Label, C-Tick Mark 334-2457-00
90486 Power Supply
90485/86/91/99 Service Manual Part Number: 070-0680-01, or
UCW Service Manual Part Number: 070-0470-01 (Rev B)
Power Supply PCBA 670-0753-03
Fuse, 1A, Main 159-0083-00
Fuse, 1.6a, Slo-Blo, 5x20 159-0027-00
Fuse Drawer, 5x20 mm, 2 Pole 352-0070-00
Battery, Sealed Lead-Acid, 12 volt, 700 mAh 146-0044-00
Cable Assy, Power Supply / SDLC With Power (cable from 90486 to 90485
module housing) 012-0387-00
Cover, Plastic, AC Power Supply 200-0190-00
Base, Casting, AC Power Supply 432-0026-00
Panel, Front, AC Power Supply 333-0367-00
Bracket, AC Receptacle 407-0281-00
Bracket, Battery, AC Power Supply 407-0282-00
Bracket, Retainer, AC Power Cord 407-0287-02
Pow er Cord, 120v, 10A, 18 AWG, 10 Foot 161-0032-00
90489 Sp02 Module
Service Manual Part Number: 070-0360-01
ELECTRONIC ASSEMBLIES:
RS-232 PCBA (RUPI Board) - Pin-Thru 308185-003
RS-232 PCBA (RUPI Board) - Surface Mount 671-0542-00
Pulse Oximetry PCBA, Pin-Thru ( the -02 is NOT backward compatible
with the -01) NOTE: s/w v3.05.20 and
later are NOT released on DIP chips - The SMD board (-03) must be
purchased to do further software
upgrades.
670-0491-01/02/-
03
Pulse Oximetry PCBA, Surface Mount - Backward compatible with -01/-02,
but requires s/w version 3.03.55
/ 1.03.55 or later. (also used in 90351 & 90465 / 66 / 67)
670-0491-03
Pico-Fuse, .25a, Sub-Miniature 159-5042-00
CABLES AND CONNECTORS:
Cable Assy, Pulse Ox, Shielded, Front Panel (Note: -02 is shielded,
-01 was not). 175-0649-02
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
Bushing for Front Panel SpO2 Connector 358-0004-00
CHASSIS COMPONENTS:
Kit, Front Panel Replacement, 90489 - Includes everything needed.
040-0331-00
Front Panel, Module, Pulse Ox, PCMS 306979-202
Label, Module, Front Panel, 90489 Sp02 334-0735-00
90491 Powered Module Housing
Service Manual Part Number: 070-0680-01
ELECTRONIC ASSEMBLIES:
PCBA, Backplane w / Reg, 90491 670-0874-00/01
Backplane PCBA SDLC Connector J2 131-1282-00
Battery, Sealed Lead-Acid, 12v, 2.3 AH 146-0018-00
Power Supply, External, 80w, 18v, Medical, 90491 NOTE: No exchange –
do not order 119-0251-00-X. 119-0251-00
CABLES AND CONNECTORS:
Backplane PCBA Module SDLC Connector J4, J5, J6, J7: CONN-DSUB, 15P,
Female, w /Standoff 131-1279-00
Backplane PCBA External SDLC Connector J2: CONN-DSUB, 26 PHD, Female,
w /Standoff 131-1282-00
Power Cord, Domestic, 120V, 10A, 18 AWG, 10' 161-0032-00
DC cable from PS to module housing (Cable, Replacement, 119-0251-00
Power Supply) 010-1428-00
Standoff, 4-40 X 1.35" L, Hex, Ault Power Supply - the standoffs on
the power connector to the monitor. 361-0201-00
Cable, Battery, 90491 175-0988-00
Cable Assy, SDLC, connects Monitor To Module Housing WITH Module
Housing Power Supply
Cable Assy, Monitor To Bucket, 2'
.........................................................................
012-0391-02
Cable Assy, Monitor To Bucket, 4'
.........................................................................
012-0391-04
Cable Assy, Monitor To Bucket, 8'
.........................................................................
012-0391-08
Cable Assy, Monitor To Bucket, 10'
.......................................................................
012-0391-10
012-0391-xx
Cable Assy, SDLC, Monitor To Module Housing - 90491/90499 Cables for
use WITHOUT Module Housing
Power Supply (works with UV1600 & UV1700 ONLY)
012-0601-00
Cable, Powered Flexport, For 90491 (26-pin connector instead of
9-pin). Also requires the 012-0507-01
(Terminator Plug, SDLC, 9 Pin).
012-0555-00
Cable Assy, SDLC, 90518, 26 to 9 Pin, Tee 012-1116-00
CHASSIS COMPONENTS:
Front Bezel Assembly, 4 Bay Module Housing, 90491 (replaces
203-0046-00). Contains:
Bezel, 4 Bay Module Housing 2'
............................................................................
203-0046-00
Door, Module Housing, 90485 2'
............................................................................
202-0021-01
Spring, Torsion, Door, 4 Bay Module Housing 2'
................................................... 214-0491-00
Pin Hinge Module Cage 2'
.......................................................................................
306766-001
Clip, Retention, Module Door 2'
..............................................................................
344-0058-00
644-0080-00
Chassis, 4 Bay Module Housing, 90491 441-0072-00
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
Panel, Rear, 90491 333-0429-00
Support, Foot, 90491 386-0237-00
Divider, 4 Bay Module Housing, 90491 426-0048-00
Standoff, 4-40 X 1.35" L, Hex, Ault Power Supply - screws Power Supply
onto rear panel connector 361-0201-00
Screwlock, Female, 4-40, .188 -hex headed threaded standoff on rear
panel connectors 129-0039-00
Door, Battery Access, 90491 202-0029-00
Enclosure, Left Half, 90491 437-0126-02
Enclosure, Right Half, 90491 437-0126-03
Module Door Retention Clip (to correct problem if door hinge pins pop
off - two are needed for each door,
so order eight total)
344-0058-00
Kit, UCW Wall Mount with 90491 Swivel Arm 016-0437-00
Kit, Mounting, Fixed Surface, Module Housing 016-0435-00
Kit, Mounting, Fixed Surface, Power Supply 016-0434-00
90492 12-Lead ECG Module
90492 Options:
Option A = Basic ECG, Alarms For high/low HR, asystole, and VFIB, plus
12-lead ST analysis
Option B = MultiView 1 with 12-lead ST analysis
Option C = Multiview II with 12-lead ST analysis
Option D = 12-Lead Adult Diagnostic Interpretation with Reports
Option R = Adds Respiration
Service Manual Part Number: 070-0579-00
ELECTRONIC ASSEMBLIES:
CPU 670-0665-00
Analog Board 670-0661-00
Isolation Board 670-0668-00
Front Panel PCBA 670-0669-00
Hi Level Out Board 670-0670-00
CHASSIS COMPONENTS:
Front Panel Replacement Kit, 90492 050-0095-00
Panel, Rear, Module 306981-003
Label, Module Ident. -En/Fr/Gr 334-0805-00
Label, Module, S/W Version, CE, C-Tick, TÜV 334-2502-00
90496 Ultraview Command Module
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
90496 OPTION LIST:
90496-A: Multi-Lead ECG, adult/neonatal NIBP, Sp02, and 2 Temperatures
90496-B: Multi-Lead ECG, adult/neonatal NIBP, Sp02, 2 Temperatures,
and 2 Invasive Pressures
90496-C: Multi-Lead ECG, adult/neonatal NIBP, Sp02, 2 Temperatures, 4
Invasive Pressures, and Cardiac
Output
90496-J: 2 Invasive Pressures and 2 Temperatures
90496-K: 4 Invasive Pressures and 2 Temperatures
90496-L: 2 Invasive Pressures, 2 Temperatures, and Sp02
90496-N: 2 Invasive Pressures, 2 Temperatures, and Cardiac Output
90496-O: 4 Invasive Pressures, 2 Temperatures, and Cardiac Output
Option D = 12-Lead Adult ECG and Diagnostic Interpretation with
Reports
Option E = 12-Lead Adult ECG without measurements or Interpretation
Option F = Basic arrhythmia, alarms for high/low HR, asystole, and
VFIB
Option G = MultiView 1
Option H = MultiView 2
Option R = Adult/Infant Respiration
Option S = ST segment analysis, review, and trends
Option V = Respiration and Varitrend 3
Service Manual Part Number: 070-0752-01
ELECTRONIC & PNEUMATIC ASSEMBLIES:
PCB Assy, MPC860 CPU/NIBP, 90496 Note 1: the -01 CPU has a 10-position
DIP switch. All of the switches
should be in the OFF position. Note 2: The -04 CPU incorporates the
new quieter NIBP pump. If customer
wants quieter NIBP, order 040-1487-00 (Kit, Upgrade, NIBP Performance,
90496).
670-0882-00/01/-
03/-04
Kit, Upgrade, NIBP Performance, 90496. Used to add the 670-0882-04
CPU/NIBP PCBA with the quieter NIBP
pump to a Command Module with an earlier board. Contains:
670-0882-04 PCB Assy, MPC860, CPU/NIBP, 90496
386-0493-02 Plate, CPU Shield
342-0377-00 Insulator, Mylar, CPU Shield
348-0074-01 Gasket, EMI, Be-Cu, 1.15" X 0.280" (3 Included)
334-2495-00 Label, Module, SW Version, CE
075-0464-00 Install Instruction, NIBP Performance Upgrade Kit
040-1487-00
Pump, Pneumatic, 90496 (P/O 670-0882-00/-01/-02/-03 CPU Assy) -
Original Pump 119-0257-00
New Quieter NIBP Pump - ONLY used with the 670-0882-04 CPU PCBA and
only with minimum software
version 1.02.20. For -03 and earlier must use 040-1487-00 NIBP Kit,
below.
119-0493-00
PCB ASSY, CPU W/O NIBP, 90496
CPU for 90496 w/o NIBP (90496 with options -J, -K, -L, - N, and -O)
670-0935-01
Jack, Phone, Right Angle, PC Mount (J990, J790) 131-0327-00
SDLC Connector (Connector, DA15-M, Right Angle, PCB Mount, 3/8")
131-0904-00
PCB Assy, Analog Front End, 90496
NOTE: The -02 board provides improved pacer detection (To add to
existing 90496, see 040-1488-00, Kit,
Upgrade, Pacer Detection, 90496).
670-0842-00/01/-
02
Kit, Upgrade, Pacer Detection, 90496. Contains:
670-0842-02 PCB Assy, AFE, 90496
075-0465-00 Install Instruction, Pacer Detection Upgrade Kit
040-1488-00
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
Front Panel PCB Assy, 90496 670-0843-00
Front Panel PCB Assy, 90496, ESIS 670-0843-01
NIBP Connector, Neonatal (Coupling, Panel Mount, W/Barb 1/8")
376-0010-00
NIBP Connector, Adult (Plug, Panel Mount, W/Barb 1/8") 134-0045-00
Tubing Assy, Tygon - all three internal NIBP hoses for CPU/NIBP board
(replace if kinked). 166-0052-00
Valve, Pneumatic Assy, 90496 (P/O 670-0882-00 Assy) 119-0258-00
Pump Tie-Down Strap (P/O 670-0882-00 Assy) 346-0015-00
Pad, Pump Mounting (P/O 670-0882-00 Assy) 348-0277-00
Switch, Push, SPST, Right Angle (P/O 670-0882-00 Assy) 380245-001
Cap, Switch, Red (NIBP Deflate Switch Cap) 201-0017-00
CABLES AND CONNECTORS:
Cable Assy, NIBP Diagnostic -CABLE REQUIRED TO ACCESS NIBP DIAGNOSTIC
MENUS. 175-1023-00
CHASSIS COMPONENTS:
Front Panel Replacement Kit, 90496-A 050-0151-00
Front Panel Replacement Kit, 90496-B 050-0151-01
Front Panel Replacement Kit, 90496-C 050-0151-02
Front Panel Replacement Kit, 90496-J 050-0151-03
Front Panel Replacement Kit, 90496-K 050-0151-04
Front Panel Replacement Kit, 90496-L 050-0151-05
Front Panel Replacement Kit, 90496-M 050-0151-06
Front Panel Replacement Kit, 90496-N 050-0151-07
Front Panel Replacement Kit, 90496-O 050-0151-08
Front Panel Label for 90496-A (new, with Configurable HLO labeling)
334-2456-00
Front Panel Label for 90496-B (new, with Configurable HLO labeling)
334-2456-01
Front Panel Label for 90496-C (new, with Configurable HLO labeling)
334-2456-02
Panel, Front Module, 90496 333-0431-03
Latch Module 306965-001
Spring Torsion (Mod) 306966-001
Pin, Dowel, .094 Dia X .70 L 214-0254-00
Handle, Module 367-0016-00
Label, Module, Push Handle 334-0267-02
Cover, Module Side 200-0176-00
Panel, Rear, Module 306981-003
Cap, Switch, Red (NIBP Deflate Switch Cap) 201-0017-00
Label, Module Model & Serial Number 334-2374-00
Label, Module, SW Version, CE, C-Tick 334-2495-00
90499 Two Bay Module Housing
Service Manual Part Number: 070-0680-01
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
ELECTRONIC ASSEMBLIES:
PCB Assy, Backplane, 90499 (Note: The -01 replaces the -00 in
production, but customer can still order the
-00 to replace like-for-like).
670-0927-00/01
Battery Pack, .65 AH / 12 VDC, NiMH 146-0053-00
Power Supply, External, 80w, 18v, Medical, 90491 119-0251-00
CABLES AND CONNECTORS:
Power Cord, Domestic, 120V, 10A, 18 AWG, 10' 161-0032-00
DC cable from PS to module housing (Cable, Replacement, 119-0251-00,
90491 Power Supply) 010-1428-00
Standoff, 4-40 X 1.35" L, Hex, Ault Power Supply - screws Pow er
Supply onto rear panel connector. 361-0201-00
Cable to use the 90499 Module Housing without an external power supply
(with UV1600 & UV1700 Monitors
ONLY).
012-0601-00
Cable Assy, SDLC, Monitor To Module Housing WITH Power Supply
Cable Assy, Monitor To Bucket, 2'
.....................................................................................012-0391-02
Cable Assy, Monitor To Bucket, 4'
.....................................................................................012-0391-04
Cable Assy, Monitor To Bucket, 8'
.....................................................................................012-0391-08
Cable Assy, Monitor To Bucket, 10'
...................................................................................012-0391-10
012-0391-xx
SDLC Terminator - 26-PIN -- New Terminator For Use With 90309 Monitor
And 90499 Module Housing 131-1734-00
CHASSIS COMPONENTS:
Chassis, 90499 Module Housing 441-0079-00
Enclosure Assy, Left Half, 90499 437-0137-00
Enclosure Assy, Right Half, 90499 437-0138-00
Divider, Module Housing, 90485 426-0042-01
Cover, Rear, 90499 Module Housing 200-0240-00
Label, CE Mark, 0.75" X 0.5", W/Num 334-1595-00
90513 Capnograph and 90514 Multi-Gas Analyzer
Service Manual Part Number: 070-0282-00
ELECTRONIC ASSEMBLIES:
Communication Board 670-0442-02
Power Supply 670-0453-03
RS-232 Board (Flexport Board) 670-0557-00
Fan, 19 cfm 119-0133-00
PNEUMATIC COMPONENTS:
OBS Bench Assy, 90514 -NO LONGER AVAILABLE. LISTED FOR REFERENCE ONLY.
010-0190-00
O2 Sensor 015-0132-03
Sample Cell 513 019-0091-00
OBS Sample Cell 514 019-0092-00
Bench Assy, 90513 010-0189-01
Cal Gas Regulator Assy, Pressure, 900 PSI / 20 PSI (screws into cal
gas manifold) 119-0126-00
Regulator Assy, Pressure, 30 PSI / 1 PSI 119-0129-02
Scrubber, CO2 378-0036-02
Tubing, Nafion Assy 255-0017-00
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
Tubing, .062 ID X .125 OD, Polyurethane (sold by the foot) 166-0010-00
Tubing, .125 ID, .250 OD, Polyurethane (sold by the foot) 166-0011-00
Tubing, .094 ID X .156 OD, Polyurethane (sold by the foot) 166-0012-00
Pump Assembly, 90513 & 90514 (replaces 90513 Pump, p/n 119-0153-01)
119-0122-03
Pump, Andros (p/o Pump Assy, above – includes Pump Controller PCBA)
117-0013-01
Valve, Solenoid, 12V, 0.5W, 0-25 PSI 214-0218-02
90513 Gas Bottle 050-0513-00
OBS 90514 Gas Bottle 050-0514-00
OBS Plastic Washer for Gas Bottle 210-0043-00
Flowmeter Adapter 384410-001
Filter, Air, 3 Micron 378-0040-00
CHASSIS COMPONENTS:
OBS BEZEL ASSY, 90513/90514 -Kit no longer available - must order
individual parts:
Label, Water Trap Holder, Spacer
...................................................................................334-0457-00
Tubing, Heat Shrink, .187, Black
......................................................................................162-0010-00a
Plate, Option, Front Panel
.................................................................................................386-0133-00
Bezel, Front, 90513/514
..................................................................................................203-0031-01
Plate, Water Trap, Holder
.................................................................................................386-0132-00
Cover, Water Trap Holder
................................................................................................200-0122-01
Holder, Water Trap, Molded Version
...............................................................................352-0036-00
Clip, Contact, Water
Trap..................................................................................................344-0018-00
Label, Backing, Water Trap
..............................................................................................334-0188-00
Label, Patient
Connect......................................................................................................334-0489-01
Cable Assy, Water
Trap...................................................................................................175-0601-00
Tube, .062, Heat Shrink,
Black..........................................................................................162-0015-00
Cable Assy, Front Panel LED's
.........................................................................................175-0603-00
PCB Assy, Front Panel Indicator
......................................................................................670-0467-00
Clamp, For .125 OD Tubing
..............................................................................................214-0325-00
Tubing, .062 ID X .125 OD, Polyurethane
.........................................................................166-0010-00
Fitting, Nylon, Female Luer Taper,
...................................................................................214-0224-00
Fitting, Male Luer To 1/16" Id Tubing
................................................................................214-0075-00
650-0139-00
90515 Capnograph Module
90515 Options:
90515-1A = CO2 /O2 Module, Without Flexport
90515-1B = CO2 /O2 Module, With Flexport
Service Manual Part Number: 070-0566-01
ELECTRONIC ASSEMBLIES:
Sensor Interface Board 670-8818-00
CO2 / SDLC Board 670-0775-00
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
Flexport Board 670-0755-00
O2 Sensor with Mini Phone Jack 015-0285-00
CO2 Sensor Assy, 90515 - reusable mainstream sensor - order thru Med.
Supply 011-0710-00
CABLES AND CONNECTORS:
Flex Cable 175-0870-00
CHASSIS COMPONENTS:
Kit, Front Panel Repl, 90515 w/o Flexport - Includes Label 050-0090-00
Kit, Front Panel Repl, 90515 w/Flexport - Includes Label 050-0091-00
Label, Front Panel, 90515 334-1135-00
Label, Front Panel, 90515, w/Flexport 334-1134-00
Calibration Parts:
Calibration Kit, 90515 - contains one CO2 Calibration Airway Adapter,
two 18” pieces of tubing, and one
tubing connector
025-0045-00
Cal Gas Cylinder, 4 Pack, Trimix 006-0179-00
Cal Gas Regulator Valve 369009-002
Cal Gas Regulator Adapter 369009-003
90516 Capnograph Module
Service Manual Part Number: 070-0770-00
ELECTRONIC ASSEMBLIES:
PCBA, EMI Interface, 90516, Capno 670-0886-00
PCBA, CO2 , SDLC, Capno, 90516 670-9014-01
PCBA Assy, OEM, CO2, 90516 670-8820-00
Accessory, Sensor, CO2 , 90516 704-0001-00
Sensor, 02 W/Mini Phone Jack, 90515/6 015-0285-00
CABLES AND CONNECTORS:
Cable, Assy, O2 Sensor, Straight W/Mini Plugs (straight O2 Sensor
cable) 175-0996-00
Cable Assy, O2 Sensor, Mini Plug, 90515 (coiled O2 Sensor cable)
175-0877-00/01
CHASSIS COMPONENTS:
Panel, Front, 90515/90516 333-0374-00
Panel, Rear, Module, 90516 333-0389-00
Cal Gas Cylinder, 4 Pack, Trimix 006-0179-00
Cal Gas Regulator Valve 369009-002
Cal Gas Regulator Adapter 369009-003
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
90518 Multi-Gas Analyzer
Service Manual Part Number: 070-0643-01
ELECTRONIC ASSEMBLIES:
I/O Board 670-0807-00
CPU Board 670-0804-00
Front Panel Board 670-0810-00
PCBA, Manifold, 90518 (-00 is for the -A model, OBSOLETE) 670-0811-00
PCBA, Manifold, 90518 (-01 is for the -B model) 670-0811-01
Rear Connect Board 670-0812-00
Carrier Board 670-0813-00
Power Entry Board 670-0814-00
Power Supply 670-0815-00
Battery, Sealed Lead Acid 146-0044-00
Pump 010-0867-00
Kit, 90518, Replacement, Gas Bench - Contains Bench and Installation
Instructions. (Note: When ordering,
specify exchange part number 050-0147-01-X).
050-0147-01
PNEUMATIC COMPONENTS:
O2 Sensor
NOTE: The O2 sensor for the 90518 recently changed to a new Ultra-Fast
O2 cell. Most facilities previously
using the old O2 cell (010-1120-00) have already converted to the new
Ultra-Fast O2 cell.
Old O2 Cell New O2 Cell
IF YOU HAVE NOT ALREADY CONVERTED: Order the O2 Cell Upgrade Kit (part
number 050-0429-00). The
upgrade kit includes the new Teledyne Ultra-Fast O2 cell, a revised O2
cell bracket, and installation
instructions.
ONCE THE UPGRADE KIT HAS BEEN INSTALLED: Replacement Ultra-Fast O2
cells are ordered using part
number 050-1120-00. This kit includes the new Ultra-Fast O2 cell and
installation instructions.
050-1120-00
CO2 Scrubber 650-0515-00
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
Filter, Inline, 17 mm OD, 5 Micron, Luer -Disk shaped filter between
manifold and bench 378-0115-00
Fitting, Male Luer To 1/16" ID Tubing - Used with 378-0115-00 filter,
above. 214-0075-00
Assy, Manifold, Main, 90518 644-0055-01
Assy, Filter, Packaged, 90518 - This is the triangular input filter,
ordered from Supplies and Accessories. 016-0428-00
CABLES AND CONNECTORS:
Power Cord, Domestic, 120V, 10A, 18 AWG, 10 foot 161-0032-00
T-Cable, SDLC (Cable Assy, SDLC, 90513/514/518, Tee 9 Pin) 012-0175-01
Cable Assy, SDLC, 90518, 26 To 9 Pin Tee 012-1116-00
4 foot SDLC Extender Cable (Cable Assy, SDLC, Extender, PCMS,
90513/514/518) 012-0178-01
CHASSIS COMPONENTS & ACCESSORIES:
Bracket, Power Cord, 90518 407-0366-00
Rear Panel plate, includes standoffs for rear panel connectors. NOTE:
standoffs not available separately. 333-0390-00
Cover, Left, With Access, 90518-B 200-0226-01
Kit, Calibration, 90518 - Includes: 712-0248-00 (Bottle, Gas
Calibration), 166-0011-00 (Tubing, .125 ID, .250
OD, Polyurethane), 214-0486-00 (Fitting, Luer, Tee, 90518), and
214-0261-00 (Fitting, 1/8 Hose, Male Luer)
025-0047-00
Gas Cal Kit - Order from Supplies and Accessories 025-0047-00
Gas Cal Kit Regulator - Order from Supplies and Accessories 369009-002
90550 / 90551 / 90555 / 90557 Vitastat and Lifeclinic Machines
Sold to Health Guard, Inc, Winchester, TN. Their phone = (800)
543-2787
90838 Printmaster™
Service Manual Part Number: 070-0532-02
Contact Spacelabs Technical Support for information on this product.
91341-09
Synthesized NB 1400 MHz
Telemetry Transmitter
Service Manual Part Number: 070-0744-00 (Manual for Enhanced Ultraview
Digital Telemetry)
ELECTRONIC ASSEMBLIES:
PCBA, Digital TM TX, ECG NB, T1.5 670-1238-01
PCBA, Digital TM TX, RF NB, T1.5, 1400 MHz 670-1253-04
Antenna, Dipole, 91341-09 117-0141-00
Connector, DIN, 5 Lead ECG, with LEDs 131-0807-03
CHASSIS COMPONENTS:
Base Enclosure Replacement Kit, 91341-09 050-0422-00
Cover Enclosure Replacement Kit, 91341-09 050-0423-00
Battery Door Assembly - Includes battery door, gasket, pins, and
springs all preassembled. 050-0470-00
Assy, Base/Conn. 91341 650-1424-00
Assy, Cover/Sw itch, TX, 91341/7 650-1351-00
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
Door, Battery Compartment, DTM TX 202-0023-00
Shield, ECG 91341 337-0480-00
Spring, Coil, Battery 214-0282-01
Spring, Hinge, DTM TX 214-0425-00
Pin, Hinge, DTM TX 214-0426-00
Gasket, Battery Door, DTM TX 348-0240-01
Gasket, Top Cover Housing 348-0057-00
Gasket, O-Ring, .110 ID X .047 CS 348-0270-00
Gasket, O-Ring, .087 ID X .040 CS 348-0613-00
Gasket, O-Ring, .300 ID X .050 CS 348-0614-00
Label, ECG 91341-09 334-5457-01
Label, Logo, 91341 334-2158-03
Label, Patient Input, 91341/7 334-5435-00
Label, I.D. 91341-09 1400 MHz 334-5569-02
Label, Options/Version/Softw are, 90343 334-1241-01
Label, S/N, Dig TM 90343 334-2479-01
Label, Channel Number, Digital TM 90343 334-2478-01
Label, Warning, Battery Insertion 334-1321-00
Label, Product Ident. Kit / Serial Number 334-1433-00
91369 SL2400 91369-24
91369 Options
-J = Internal dual channel recorder (Polish
Language
-N = Vital Signs Calculations
-O = Drug Dose Calculations
-Q = Data Shuttle (with 90470, 90496, or 91496
Modules only)
List:
-R = Patient Data Logger
-U = Internal dual channel recorder (all languages
other than Polish)
-Z = 802.11b Wireless Networking
-04 = Four waveforms (up to 12 parameters)
-06 = Six waveforms (up to 18 parameters)
91369 Service Manual Part Number: 070-1156-00
NOTE: 91369 built with CPU P/N 670-1275-00 (with remote key pad
capability) use serial numbers starting
with 1369-000100.
ELECTRONIC ASSEMBLIES:
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
PCBA, CPU, 91369 670-1275-xx
PCBA, I/O Bay, SDLC, ALM, Ethernet, Com, 91369 670-1302-00
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
Display, LCD, Color, TFT, 640 x 480, NEC 150-0340-00
Kit, NEC Backlight Replacement 050-0353-00
Inverter, Backlight, CCFL, Dual Tube App. Caution -be sure to
reinstall the insulator when replacing the
backlight inverter, or the inverter will arc to the metal frame!
010-1603-00
Insulator, Mylar, Inverter. CAUTION - be sure to reinstall this
insulator when replacing the backlight inverter,
or the inverter will arc to the metal frame!
342-0373-00
Touchscreen, 5-Wire Resistive, 10.4" 010-1445-00
PCBA, Interconnect, 90369/91369 670-0849-03
Assy, Power, Monitor, 91369 (board with on/off switch and power status
LEDs). 650-1429-02
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
Assy, Nurse Alert, 91369 650-1425-00
Pow er Supply, 90w, 18v, Medical Grade 119-0479-00
Fan Assy, 40 mm, 12v 119-0186-01
Battery, NiMH, 12v, 2.45 Ah 146-0055-00
Charger, Battery, NIMH/SLA, 100-240V (External dual-bay battery
charger) 010-1114-01
Printer (Replacement printer, English, German, French, Italian,
Spanish, Swedish, or Dutch) 119-0191-03
Printer (Replacement printer, Polish) 119-0497-00
RCU (PCBA, Recorder CPU) 670-0624-05
CHASSIS COMPONENTS:
Bezel, Front, 91369 203-0231-00
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
Bracket, Display, 91369 407-0744-00
Enclosure, Rear, 91369 437-5045-00
Panel, Rear, 91369 333-0887-00
Handle, Enclosure, 91369 367-0833-00
Retainer, Handle, 91369 343-0372-00
Foot, 90309 348-0157-00
Plug, Recorder, 91369 (blank panel that covers the recorder bay if the
recorder option is not installed). 134-0032-02
Plug, Hole, SDLC Port, 91369 (small rectangular cover panel on bottom
of monitor enclosure). 134-0044-01
Assy, Frame, Contact 650-0279-01
Chassis, 90369/91369 441-0073-01
Spring, PCMS Ground (used in Chassis Assy) 214-0320-01
Plate, Backing, Anti-Rotation, DC Input 386-0251-00
Wall, Module, Chassis, 91369 386-0514-00
Plate, Ground, DC Input Conn, 91369 386-0517-00
Stud, Ground, Equal, Potential 355-0001-00
Hanger, PCMS Door 407-0241-00
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
Bracket, Plug Retaining 407-0270-00
Screwlock, Female, 4-40, .188 129-0039-00
Battery Door, 91369 202-0228-00
Battery Door Latch, 91369 105-0038-01
Battery Door Spring 214-0328-00
Battery Door Hinge Pin 214-0318-00
Battery Divider, 90369/91369 426-0038-02
Battery Latch 105-0037-00
Battery Ejector 214-0317-01
Door, Module Cage, 91369 202-0014-02
Module Cage Door Hinge Pin 214-0329-00
Module Door Spring, Torsion 214-0342-00
Spring Extension, 90309/90369 214-0518-00
Spring, Extension, 1/2" Lg, 1/8" O.D, .017 214-0333-01
Pad, Fan Exhaust, 90369 348-0275-00
Retainer, E-Ring, 3/32, D.069, T.015 354-0019-00
Gasket, EMI, Fabric Over Foam, "C", 12" Lg 348-0617-00
Label, Battery, NiMH, 91369 334-5589-00
Label, Model#, Serial#, Options, SLM 334-1261-00
Label, Voltage Input, 91369 334-5581-00
Label, Reg, CE, CSA, 1.12 X 1.40 334-5593-00
CABLES AND CONNECTORS:
Power Cord, Domestic, 120v, 10A, 18 AWG, 10', Hospital Grade
161-0032-00
Cable, Adapter, Remote Nurse Alert (685-0008-00),91369/8 012-0847-00
Cable Assy, DC Input Conn 175-0788-01
Cable Assy, Battery Contact 175-1090-00
Cable, Inverter, 91369 175-1591-00
Cable, Display, 91369 (Note: Changed from 175-1592-00 display cable).
175-1012-02
ACCESSORIES:
USB to PS2 adapter 010-1616-00
Keyboard / Mouse, cordless 010-1620-00
Mouse, USB 010-1622-00
Keyboard, English, USB 010-1621-00
SL2700
SL2800
SL3800
91387 Bedside and Central
Monitors
SL2700 Monitor, Patient (Bedside Only, No DNA, 4 / 6 / 8 waveforms)
91387-27
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
SL2800 Monitor, Patient, Advanced (Bedside Only + DNA, 8 waveforms)
91387-28
SL3800 Monitor, Central (Bedside/Central +DNA, 4 / 6 / 8 / 12 / 16
waveforms) 91387-38
91387 Options
-N = Vital Signs Calculations
-O = Drug Dose Calculations
-Q = Data Shuttle (with 90470 or 90496/91496
Modules only)
-R = Patient Data Logger (PDL)
-S = Dynamic Network Access (DNA) -- not
available for the 91387-27.
-V = Bedside Full View 12-Lead (requires 8
waveform option)
List:
-W = Full Bed Review (FBR) - up to seven waveforms
-04 = Four waveforms
-06 = Six waveforms (up to 18 parameters)
-08 = Eight waveforms (up to 24 parameters)
-12 = Twelve waveforms (central only)
-16 = Sixteen waveforms (central only)
91387 Service Manual Part Number: 070-1159-00
NOTE: 91387 monitors built with the 670-1274-00 CPU revision that
provides remote key pad capability have
serial numbers starting with 1387-000100.
ELECTRONIC ASSEMBLIES:
PCBA, CPU, 91387 670-1274-00
PCBA, Power Supply, 91387 670-1297-01
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
PCBA, SDLC, 91387 (Backplane Board) 670-1298-00
Pow er Supply, 90w, 18v, Medical Grade 119-0479-00
Battery Pack, .65 Ah / 12 VDC, NiMH, 10AAA 146-0053-00
Speaker and Cable Assy, 90364 175-1046-00
Shield, ESD, Motherboard W/Power 337-0214-00
CHASSIS COMPONENTS:
Chassis, 90387/91387 441-0077-02
Bezel Assy, Front, 91387 (Assembly components listed below, indented)
203-0049-01
Door, Module Housing, 91387 202-0021-02
Bezel, 4 Bay Module Housing, 91387 203-0046-01
Spring, Torsion, Door, 4 Bay Module Housing 214-0491-00
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
Pin Hinge Module Cage 306766-001
Lens, Light Pipe, .10 X .20, SMT LED 331-0030-00
Panel, Vent, Bezel Assy, 91387 333-0441-01
Clip, Retention, Module Door 344-0058-00
Panel, Rear, w ithout Video, 91387
Panel, Rear, With Video, 91387
333-0883-00 333-0883-01
333-0883-00
333-0883-01
Panel, Rear, Primary, 91387 333-0884-00
Enclosure, Left Half, 91387 437-0126-04
Enclosure, Right Half, 91387 437-0126-05
Divider, 4 Bay Module Housing, 91387 426-0048-01
Foot, Round, .600" Dia, Santoprene 348-0205-00
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
Gasket, Panel, EMI, 2.00" Long, Adhesive Mounting 348-0292-00
Stud, Ground, Equal Potential 355-0001-00
Handle, Aluminum, 1"1g, 1" Ht, 4-40 Thd 367-0020-00
Support, Foot, 91387 386-0237-01
Bracket, Speaker Retainer 407-0739-00
Bracket, Speaker 407-0740-00
Label, Model#, Serial#, Options, SLM 334-1261-00
Label, CE Mark, 0.75" X 0.5", W/Numbers 334-1595-00
Label, Ident, CSA, Redmond 334-1750-00
Label, Ident, ETL, Redmond 334-1751-00
CABLES AND CONNECTORS:
Power Cord, Domestic, 120v, 10A, 18 AWG, 10', Hospital Grade
161-0032-00
Cable, Adapter, Remote Nurse Alert (685-0008-00),91369/87 012-0847-00
Cable Assy, DC Input Connector (includes rear panel power supply
connector, and nut and washer) 175-0788-01
Cable, Power, Interconnect 175-1018-01
Cable, SDLC Network (RJ-45 to RJ-45) 175-1597-01
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
ACCESSORIES:
USB to PS2 adapter 010-1616-00
Keyboard / Mouse, cordless 010-1620-00
Mouse, USB 010-1622-00
Keyboard, English, USB 010-1621-00
91496 UltraviewSL Command Module
91496 OPTION LIST:
91496-A = ECG, RESP, SpO2, 2 TEMP, NIBP (Adult and Neonatal)
91496-B = ECG, RESP, SpO2, 2 TEMP, NIBP (Adult and Neonatal), 2
Pressures
91496-C = ECG, RESP, SpO2, 2 TEMP, NIBP (Adult and Neonatal), 4
Pressures, Cardiac Output
Option D = 12-Lead Adult ECG and Diagnostic Interpretation with
Reports
Option E = 12-Lead Adult ECG without measurements or Interpretation
Option G = MultiView 1
Option H = MultiView 2
Option M = Masimo SpO2
Option N = Nellcor SpO2
Option S = ST segment analysis, review, and trends
Option U = SpO2 - Spacelabs Technology
Option V = Respiration and Varitrend 3
Service Manual Part Number: 070-1163-00
ELECTRONIC & PNEUMATIC ASSEMBLIES:
PCB Assy, MPC860 CPU/NIBP, 91496. 670-0982-00
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
PCB Assy, Analog Front End, 91496.
NOTE 1: 670-0842-XX is NOT For Use With OEM SpO2 (Masimo or Nellcor
SpO2 Options) which require the
670-1305-XX Analog Front End PCBA.
NOTE 2: The 670-0842-02 is ONLY for use with 670-0843-xx Front Panel
PCBA.
NOTE 3: The 670-0842-03 is ONLY for use with 670-1310-xx Front Panel
PCBA.
670-0842-XX
PCBA, Analog Front End, OEM SPO2, 91496 - Used ONLY with OEM SPO2
(Masimo or Nellcor SPO2
Options)
670-1305-00
PCB Assy, Front Panel, 90496, ESIS. NOTE: This Front Panel PCBA is
ONLY for use with modules with
Option –U (Spacelabs SPO2 ) AND the 670-0842-02 Analog Front End
Board.
670-0843-01
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
PCB Assy, Front Panel, EMC, 91496 NOTE: This Front Panel PCBA is ONLY
for use with modules with
Option –U (Spacelabs SPO2 ) AND the 670-0842-03 Analog Front End
Board. Has blue-colored SPO2
connector with Spacelabs sensor keying.
670-1310-00
PCBA, Front Panel, 91496, Nellcor NOTE: This Front Panel PCBA is ONLY
for use with modules with Option
–N (Nellcor OxiMax SPO2 ) AND the 670-0842-03 Analog Front End Board.
Has lavender-colored SPO2
connector with Nellcor sensor keying.
670-1345-00
PCBA, Front Panel, 91496, Masimo NOTE: This Front Panel PCBA is ONLY
for use with modules with Option
–M (Masimo SPO2 ) AND the 670-0842-03 Analog Front End Board. Has
gray-colored SPO2 connector
with Masimo sensor keying.
670-1346-00
Nellcor OxiMax MP100 SpO2 Daughterboard (Option -N) (Size = 2 inches
by 1.5 inches) 010-1635-00
Masimo MS-11 SpO2 Daughterboard (Option -M) (Size = 2 inches by 3.5
inches) 010-1636-00
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
Pump, Pneumatic, 91496 (P/O CPU Assy) 119-0493-00
Jack, Phone, Right Angle, PC Mount 131-0327-00
Connector, DA15-M, Right Angle, PCB Mount, 3/8" 131-0904-00
NIBP Connector, Neonatal (Coupling, Panel Mount, W/Barb 1/8")
376-0010-00
NIBP Connector, Adult (Plug, Panel Mount, W/Barb 1/8") 134-0045-00
Tubing Assy, Tygon -all three internal NIBP hoses for CPU/NIBP board
(replace if kinked!) 166-0052-00
Valve, Pneumatic Assy, 90496 (P/O CPU/NIBP Assy) 119-0258-00
Pump Tie-Down Strap (P/O CPU/NIBP Assy) 346-0015-00
Pad, Pump Mounting (P/O CPU/NIBP Assy) 348-0277-00
Switch, Push, SPST, Right Angle (P/O 670-0882-00 Assy) 380245-001
Cap, Switch, Red (NIBP Deflate Switch Cap) 201-0017-00
Connector, Board Stacker, .200,2x5
131-1908-00
Standoff, .25 Hex, 4-40,9/16l, Nylon 361-4123-00
CABLES AND CONNECTORS:
Cable Assy, NIBP Diagnostic - REQUIRED TO ACCESS NIBP DIAGNOSTIC
MENUS. 175-1023-00
CHASSIS COMPONENTS:
Kit, Service, Front Panel Assy 91496-A with SpO2 Option -U 050-0424-00
Kit, Service, Front Panel Assy, 91496-B with SpO2 Option -U
050-0425-00
Kit, Service, Front Panel Assy 91496-C with SpO2 Option -U 050-0426-00
Kit, Service, Front Panel Assy 91496-A with SpO2 Option -N 050-0463-00
Kit, Service, Front Panel Assy, 91496-B with SpO2 Option -N
050-0464-00
Kit, Service, Front Panel Assy 91496-C with SpO2 Option -N 050-0465-00
Kit, Service, Front Panel Assy 91496-A with SpO2 Option -M 050-0467-00
Kit, Service, Front Panel Assy, 91496-B with SpO2 Option -M
050-0468-00
Kit, Service, Front Panel Assy 91496-C with SpO2 Option -M 050-0469-00
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
Front Panel Label for 91496-A (SpO2 Option –U) 334-5584-00
Front Panel Label, 91496-A, Masimo (SpO2 Option –M) 334-5674-00
Front Panel Label, 91496-A, Nellcor OxiMax (SpO2 Option –N)
334-5592-00
Front Panel Label for 91496-B 334-5584-01
Front Panel Label, 91496-B, Masimo 334-5674-01
Front Panel Label, 91496-B, Nellcor (SpO2 Option –N) 334-5592-01
Front Panel Label for 91496-C 334-5584-02
Front Panel Label, 91496-C, Masimo 334-5674-02
Front Panel Label, 91496-C, Nellcor (SpO2 Option –N) 334-5592-02
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
Panel, Front, Module, 91496 333-0431-05
Panel, Front, Module, Nellcor, 91496 333-0431-06
Panel, Front, Module, Masimo, 91496 (Preliminary as of Feb 2,2005)
333-0431-07
Module Latch 306965-001
Spring, Helical, Compression 306977-001
Spring Torsion (Mod) 306966-001
Pin, Dowel, .094 Dia X .70 L 214-0254-00
Handle, Module, Pearl White 367-0016-01
Pull Handle Label 334-0267-04
Panel, Rear, Module, 91496 306981-004
Cover, Module Side 200-0176-00
Latch Module 306965-001
Label, Module Model & Serial Numbers 334-5586-00
Label, Module, Software Version, CE, Masimo 334-5711-00
Label, Module, Software Version, CE, Nellcor 334-5706-00
Shield, AFE, Top 337-0213-00
Shield #2, AFE 337-0205-00
Insulator, Shield, AFE, Top 342-0156-00
Insulator, Shield #2, AFE 342-0149-00
Insulator, Mylar, Side Cover 342-0147-00
91414 - 14" Flat Panel Display With Touchscreen
Power Supply, External, 91414 Flat Panel Display 010-1134-00
Power Cord, Domestic, 120V, 10A, 18 AWG, 10' 161-0032-00
Cable Assembly, Touchscreen, 90387 (Adapter cable needed to connect
the 91414 Flat Panel Color LCD
Display with Touchscreen)
012-0596-00
91415-A 15" Monitor Display With Touchscreen
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
91415-A Power Supplies:
NOTE: Use the following information to order replacement power
supplies for these items:
An early version of the 15" Flat Screen Display is OEM labeled
VFX15-16A (no Spacelabs label). The NDS
Serial Number starts with 01.
The later and current versions of the 15" Flat Screen Display are
labeled by Spacelabs as 91415-A. (NDS#
VF-X15-16A, NDS Serial Number starts with 02).
Refer to the images that follow:
The early (not labeled 91415-A) 15" Flat Panel
(NDS VF-X15-16A) uses Power Supply # 0101134-
00 with a 3-pin female plug. (This is the
same power supply used with the 91414 14"
Flat Screen Display).
The 91415-A Flat Panel uses the Power Supply
# 010-1571-00 with a 5-pin female plug.
The 91415-A Flat Panel manufactured by
Digitron, ARXE, or EMG (OEM serial number
starts with AS or ASE), uses the Power
Supply # 010-1161-00 with a 5-pin male plug.
Power Supply, External, 91415 Flat Panel Display (5 male pins on round
PS connector) 010-1161-00
Base, 91415-A Display - original table top base (older 91415-A units
only, serial numbers in the format of
ASE0xxxxx)
010-1162-00
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
Base, 91415-A Display - new table top base (revised 91415-A units
only, serial numbers in the format of
ASE1xxxxx)
010-1162-01
CABLES AND CONNECTORS:
Power Cord, Domestic, 120V, 10A, 18 AWG, 10' 161-0032-00
Touchscreen cable for use with flat panel displays that have a female
touchscreen serial connector,
including the 91415-A and 91418 displays (RS232 Serial Data Cable, DB9
male to DB9 male, 6 foot)
012-0395-00
Cable Assy, VGA, DB15, Male both ends, 6 Foot 012-0593-00
Cable, Audio, Mini Stereo, 6 Foot 012-0595-00
91416-A 15" Wyse CRT Display With Touchscreen for Ultraview 1700
ELECTRONIC ASSEMBLIES:
Monitor, Color, Touch Screen, 15" 010-0681-00
PCB Assy, Video Extender, 91416 670-0803-00
I/O Board Assy, UV1700 019-0237-00
CHASSIS COMPONENTS:
Panel, Rear, 91416 333-0387-01
Top Cover Assy with Labels 050-0140-00
CABLES AND CONNECTORS:
Power Cord, Domestic, 120V, 10A, 18 AWG, 10' 161-0032-00
Cable, Video, UV 1700 012-0539-00
Cable, Touchscreen Interface, UV 1700 012-0599-00
91416-B 15" Wyse CRT Display With Touchscreen for Ultraview 1600
ELECTRONIC ASSEMBLIES:
WYSE Monitor Assembly 010-0681-00
Video Extender 670-0803-00
PCB Assy, I/O Board 670-0878-02
PCB Assy, I/O Board, Ext Touch 670-0878-03
CHASSIS COMPONENTS:
Mount Arm, Wall, 90385/90363/91416, GCX 016-0703-00
Top Cover Assy with Labels 050-0140-00
Panel, Rear, Primary, 90364 333-0449-00
Panel, Rear, UV1600, W/91416-B Interface 333-0449-01
CABLES AND CONNECTORS:
Power Cord, Domestic, 120V, 10A, 18 AWG, 10' 161-0032-00
Cable, Touchscreen Interface, UV1600 012-0620-00
Cable Assy, VGA, DB15 Male To DB15 Male, 6 Feet 012-0593-00
91418 18" Medical Grade Flat Panel Display
With Touchscreen and Integrated Speakers
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
Includes VGA video, audio and serial touch screen cables.
Requires Touchscreen Adapter Cable (012-0596-00) or Integrated Cable
(012-0594-XX) to provide
touchscreen interface to 90387 (S/N 387-0xxxxxx or lower).
Requires Touchscreen Cable (012-0395-00) to provide touchscreen
interface to 90364.
Requires Pedestal Mount (010-1475-00) if being placed on a flat,
horizontal surface.
Requires Wall Mount Kit (016-0507-00) and 91418 Mounting Assembly
(016-0712-00) for wall mounting the
91418 and 90364/90387 and power supplies.
ELECTRONIC ASSEMBLIES:
External power supply for the 91418
There are 2 types of power supplies used for 2 possible types of 91418
Flat-panel displays. All 91418
displays are made by NDS.
Power supplies:
010-1493-00 = Jerome-brand, cable has a MALE connector, used for early
models of the 91418 display.
010-1570-00 = Jerome-brand and Ault-brand, cable has a FEMALE
connector, used for all 91418 displays
sold starting MARCH 2002.
The only way to differentiate between the older and newer displays is
by looking at the connector input.
The older units can only use the 010-1493-00 power supplies. The newer
units can only use the 010-157000
supplies.
Power Cord, Domestic, 120V, 10A, 18 AWG, 10' 161-0032-00
CHASSIS COMPONENTS:
Wall mount kit Includes
channel, mounts (yoke) for 91418, 90387,90364 and power supplies
016-0507-00
Wall mount accessory kit (for use with the 91418 only) 016-0712-00
Keyboard and mouse tray kit, includes separate channel. 016-0441-00
4 Receptacle Medical Grade Power Strip With Wall Mount Kit 016-0485-00
Mount, Easel, 4 inch VESA standard spacing. 010-1475-00
CABLES AND CONNECTORS:
Touchscreen adapter cable, DB9 to DIN. 012-0596-00
VGA cable, DB15 male - DB15 male, 6 feet 012-0593-00
Audio Cable Mini Stereo Jack, 6 Feet 012-0595-00
Cable Assy, DB9M to DB9F RS232 6’. 012-0600-00
Cable Assy, DB9M to DB9M RS232 6’. 012-0395-00
Integrated cable, includes: touchscreen, video, audio, keyboard and
mouse, 4’. To be used with the 90387
only.
012-0594-04
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
Integrated cable, includes: touchscreen, video, audio, keyboard and
mouse, 10’. To be used with the 90387
only.
012-0594-10
91517 UltraviewSL Capnograph Module
Service Manual Part Number: 070-1162-00
ELECTRONIC & PNEUMATIC ASSEMBLIES:
PCBA, Capno LoFlo, OEM, 91517 010-1572-00
PCBA, Capno Interface, 91517 670-1276-02
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
PCBA, Capno Main, 91517 670-1281-03
PCBA, Capno Front Panel Conn, 91517 670-1277-02
CABLES AND CONNECTORS:
Cable Assy, Capno Main To LoFlo, 3.5 Inch 175-1594-00
CHASSIS COMPONENTS:
Cover, Module Left Side W/Notch 200-0389-00
Cover, Module Side W/EMC Lap 200-0176-01
Panel, Front, Modified, 91517 333-0885-01
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
XX Label, Front Panel 91517, CO2, Defib 334-5683-00
Handle, Module, Pearl White 367-0016-01
Label, Module Push Handle, Ultraview SL 334-0267-04
Pin, Dowel, .094 Dia X .70 L 214-0254-00
Spring, Helical, Compression 306977-001
Spring Torsion (Mod) 306966-001
Fitting, Exhaust Port, 91517 214-1017-00
Housing, Capno Module Sensor 380-0876-01
Partition, Front Panel, 91517 333-0888-00
Latch Module 306965-001
Panel, Rear, Module, 91517 333-0886-00
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
Clip, Ground, Dbl-Sided Contact 117-0163-00
Clip, Ground, Low Profile 10 Finger 117-0151-00
Bracket, Ground Jumper, 2.67x.36 407-0743-00
Bracket, Ground, .34 X .56, FP 407-0742-00
ESD Gasket, Sensor Front Panel 348-0615-01
Spacer, Nylon, OD 0.25 X ID 0.16 X 1.8l 361-4115-01
Spacer, Nylon, .25"OD, .166" ID, 2"L 361-0097-00
Standoff, 6-32 X 1.55, 1/4 Hex, Brass/Nickel 361-4112-00
Insulator W/ Foil, Cover, & Capno Main 342-0375-02
Insulator, Front LoFlo Board 342-0374-00
Label, Module, SW Version, CE 334-5588-00
Label, Rear Panel, Model/Serial Number 334-5583-00
Label, Gas Sample In/Out 334-5582-00
94000 Maternal Obstetrical Monitor
MOM
94000 Options
-B = Monochrome display
-C = Color display
-F = Ethernet interface
-G = UHF Telemetry
-H = Mermaid infra-red wireless
monitoring
-N = Vital signs calculations
List:
-P = Interactive Network Functions
-Q = Data Shuttle(with 90470 or 90496 Module)
-U = Internal dual channel maternal recorder
-03 = Three waveforms
-04 = Four waveforms (standard)
-05 = Five waveforms
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
Service Manual Part Number: 070-0786-00
NOTE: For parts for the Monitor Section of MOM, refer to the parts
list section for the 90367
and 90369 Portable Monitors
MOM ACCESSORIES:
Toco Transducer Hardwire, MOM 700-0022-00
US Transducer Hardwire, MOM 700-0021-00
Spiral Electrode Adapter Cable, MOM (NOTE: This adapter cable works
ONLY with a Kendall Fetal Spiral
Electrode (Kendall Safelinc FSE, No. 31479549)
700-0020-01
IUPC Adaptor Cable 700-0023-00
Event Marker Button AMS-20-0050
ELECTRONIC ASSEMBLIES:
CPU Board 670-0945-01
Front End Interconnect Board (includes front panel connectors)
670-0946-00
Ultrasound Board 670-0943-00/01
ECG / Toco Board 670-0944-01
DSP Board 670-0942-00
Chart Recorder Assembly 650-0715-00
Paper Out Board 670-0953-00
Speaker, 2" X 3.5" (Speaker used for fetal heart sounds, NOT key tones
and alarm tones) 119-0302-00
External DC Power Supply (Power Supply, 80w, 18v, Medical, 94000)
-NOTE: Do NOT use the DC power
supply for the 90309/90367/90369 monitors (119-0251-01) with MOM. The
-02 has additional RF shielding to
prevent electromagnetic interference with the ultrasound / FECG
inputs.
119-0251-02
CABLES AND CONNECTORS:
Connector (adaptor), 94000, 25-pin Male to 9-pin Female, SDLC.
Connects to J4 I/O port to enable
connection of external SDLC devices (such as module housings, etc) to
MOM.
131-1742-00
Power Cord, Domestic, 120V, 10A, 18 AWG, 10' 161-0032-00
Cable, MOM To Watchchild Wallplate 175-1543-00
Short Birthnet connection cable, from MOM rear panel connector to long
cable (below) AMS-52-8009
Long Birthnet connection cable, from short cable (above) to wallplate
AMS-52-8000
Cable, Event Marker 175-1066-00
Cable, DC Power 175-1067-00
Cable, Ethernet 175-1064-00
Cable, Fetal Module 175-1056-00
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
Cable Assy, Speaker, CPU to Chassis 175-1065-00
Cable, US Signal 175-1059-00
Cable, US Power 175-1058-00
Cable, DSP to CPU 175-1056-00
Cable, ECG/Toco 175-1057-00
Cable Assy, Printhead to Recorder 175-1079-00
Cable Assy, WLIR Signal/Power - Internal signal & power cable for
Mermaid Option 175-1060-00
Cable, MOM WLIR Sensor - Mermaid Option 175-1063-00
Cable, MOM WLIR Signal/Power - Mermaid Option 175-1061-00
Cable, Telemetry Signal/Power - Telemetry Option 175-1061-00
Cable, Telemetry Charger - Telemetry Option 175-1062-00
Cable, BNC to BNC - Telemetry Option 175-1068-00
CHASSIS COMPONENTS:
Main Chassis Assembly - all case parts for replacement of case.
650-0714-00
Screw, 6-32, Socket HD CAP, L .3.00, SS (long screws that secure MOM
chassis to monitor). 211-0384-00
Foot, Main Chassis, 94000 348-0310-00
Plate, Support, Main Chassis - mounting plate on bottom of Monitor
Section (UV1050) 386-0269-00
Panel, Front, Module, 94000. NOTE: The -04 version has more durable
connector tabs to prevent damage
due to frequent insertion/removal of transducers, which can result in
loose connector fit.
333-0431-04
Label, Module 334-2501-00
Module Side Cover 200-0176-00
Module Side Cover (with Tabs) 200-0245-00
ECG/Toco Shield 337-0231-00
Insulator, ECG/Toco Shield 342-0165-00
DSP Shield 337-0230-00
Insulator, DSP Shield 342-0167-00
PARTS FOR MERMAID OPTION:
PCBA, WLIR Receiver (Mermaid Receiver Board, PN changed from
AMS-23-1016) 20043224-00
WLIR Transmit Badge - Mermaid Option AMS-23-1017
WLIR Ultrasound Transducer - Mermaid Option AMS-20-0063
WLIR Toco Transducer - Mermaid Option AMS-20-0062
WLIR Battery Pack Assy - Mermaid Option AMS-23-1015
WLIR Battery Charger - Mermaid Option AMS-23-1019
WLIR Photo Detector Module - Mermaid Option AMS-23-1018
94260 Elo Displays
Service Manual Part Number: 070-1170-00
Display, 15" Medical Grade Screen 94260-15
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
Pow er Supply W/Cable, 94260-15 Inch, ELO Display 010-1617-00
Mount, Desktop, 94260-15, ELO 15 Inch 010-1613-00
Display, 18" Medical Grade Screen 94260-18
Pow er Supply W/Cable, 94260-18 Inch, ELO Display 010-1618-00
Mount, Desktop, 94260-18, ELO 18 Inch 010-1614-00
Display, 19" Non-Medical, Non-Touch Screen 94269-19
Mount, Desktop, 94269-19, ELO 19 Inch 010-1615-00
CABLES AND CONNECTORS:
Cable, Audio, 94260 / 94269, ELO Display 012-0631-00
Cable, Serial Touchscreen, M-M, 94260, ELO Display 012-0630-00
Cable, Video, 94260 / 94269, ELO Display 012-0632-00
Flexports - Common Parts
Note: For help with parts related to specific Flexports, contact
Spacelabs Technical Support
Flexport Operations and Service CD 084-0901-xx
Flexport Interface Housing - holds 3 A-series Flexports 650-0201-00
Kit, Flexport Cover Set - Includes Both Covers & Label (for A-series
Flexports) 050-0082-00
Upper Case only (for A-series Flexports) 437-0022-03
Lower Case only (for A-series Flexports) 437-0022-02
Label For Flexport Case (for A-series Flexports) 334-0246-03
Cable, Powered Flexport, for use with the 90491 and 90499 module
housings (26-pin connector instead of
9-pin).
012-0555-00
SDLC Cable, PC Express Type (D15 - D15 - D9, SDLC, Powered)
012-0191-00
SDLC Cable, PC1, PC2, Scout, or UCW Type 012-0152-00
SDLC Terminator Plug, 15 Pin, for PC Express Type SDLC Cable
650-0089-00
SDLC Terminator Plug, PC1, PC2, Scout, or UCW Type SDLC Cable
308238-101
RS232 Flexport Modular Cable 012-0182-01
Ethernet Parts & Components
Miscellaneous Ethernet Part Numbers
Gender Changer, DB25F to DB25F 012-0022-00
10 BASE-5 (AUI) PARTS
Bulk Cable, 10 Base-5, PVC 350227-001
Bulk Cable, 10 Base-5, Plenum Rated 350229-001
Yellow Non-Plenum (PVC Insulated) 10 Base 5 Backbone (Trunk) Cable,
Pre-Assembled. Replace 'xxx' with
length in feet: -077, -230, or -384
366141-xxx
Orange Plenum Rated (Teflon Insulated) 10 Base 5 Backbone (Trunk)
Cable, Pre-Assembled. Replace 'xxx'
with length in feet: -077, -230, or -384
366142-xxx
Terminator, Type N, 50 Ohm Jack, Female -for Yellow or Orange Backbone
Cable 366144-001
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
Barrel Connector, Coax Type N Female 354657-001
10 Base-5 Ethernet Coax Core Tool Set (for Yellow or Orange Backbone
Cable) 366145-002
Yellow Backbone Cable Repeater (Repeater, Ethernet, IE) 010-0158-00
Cabletron Multiport Transceiver, 10 Base-5, 8 port, 110v / 220v
366177-001
Centrecom AT-810 Multiport, 10 Base-5 Ethernet, 8 Port – 110v Only
010-0436-00
Centrecom AT-810SL Multiport, 10 Base-5 Ethernet, 8 Port - 110v / 220v
010-0436-01
Monitor to Wallplate Cables - EMI -(one end male, the other end
female)
Cable Assy, 10 Base 5 Wall Plate To Monitor, 3'
..............................................................
Cable Assy, 10 Base 5 Wall Plate To Monitor, 6'
..............................................................
012-0394-03
012-0394-06
Monitor to Wallplate Cables - Non-EMI -(one end male, the other end
female)
10 Base 5 Ethernet Transceiver Cable, 3’
......................................................................
10 Base 5 Ethernet Transceiver Cable, 6’
......................................................................
10 Base 5 Ethernet Transceiver Cable, 12’
.....................................................................
10 Base 5 Ethernet Transceiver Cable 20 Ft
...................................................................
10 Base 5 Ethernet Transceiver Cable 30 Ft
...................................................................
10 Base 5 Ethernet Transceiver Cable 40 Ft
...................................................................
10 Base 5 Ethernet Transceiver Cable 50 Ft
...................................................................
10 Base 5 Ethernet Transceiver Cable 75 Ft
...................................................................
10 Base 5 Ethernet Transceiver Cable 150 Ft
................................................................
366139-003
366139-006
366139-012
366139-020
366139-030
366139-040
366139-050
366139-075
366139-150
10 BASE-T PARTS
10-Base-T Hubs Available from Spacelabs are :
010-0923-00 8 Port, Micro AT-MR820T-17
010-1525-00 12 Port Hub with AUI
010-1523-00 24 Port, 3Com Hub - No AUI Connection
10-Base-5 To 10-Base-T Transceiver (Adapter Box), Allied Telesyn
AT-210T 010-0838-00
Wallplate Assy, 1 Gang, 10-Base-T To AUI Converter -Wallplate with
metal bracket to surface mount one
Allied Telesyn AT-210T for use with in-wall ethernet cable. Bracket
has cutout to permit view of status
LEDs.
650-0538-00
Kit, Upgrade, Conversion 10 Base T To AUI - Kit needed to connect a
monitor with an RJ45 10 Base T
connector (models 90363, 90364, 90367, and 90369) to a 10 Base 5
network hub or wallplate connector.
Includes adapter, hardware, and Installation Instructions.
040-0992-00
Bulk Cable, Non Plenum, 24 AWG, 4 UTP, Cat 5 176-0295-00
Bulk Cable, Plenum, 24 AWG, 4 UTP, Cat 5 176-0296-00
Bulk Cable, UTP, Cat 5, Pink, Non Plenum, 24 AWG 176-0308-00
Bulk Cable, UTP, Cat 5, Pink, Plenum, 24 AWG 176-0307-00
Connector, Modular Plug, Unshielded, Cat 5 - connector end for
building custom cables 131-1214-00
Connector, Modular Jack, 8 pin, Cat 5 - Wallplate connector
131-1199-00
Cable Assy, Ethernet, 10 Base-T, 5 Ft 175-0930-00
Cable Assy, PVC, Ethernet, 10 Base-T, 3 Ft
......................................................................................................
Cable Assy, PVC, Ethernet, 10 Base-T, 6 Ft
......................................................................................................
Cable Assy, PVC, Ethernet, 10 Base-T, 12 Ft
....................................................................................................
Cable Assy, PVC, Ethernet, 10 Base-T, 20 Ft
....................................................................................................
175-0951-00
175-0951-01
175-0951-02
175-0951-03
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
Crossover Cables, 10-Base-T:
Cable Assy 10-Base-T Crossover, 3’
................................................................................................................
Cable Assy 10-Base-T Crossover, 10’
..............................................................................................................
Cable Assy 10 10-Base-T Crossover, 20’
.........................................................................................................
012-0602-00
012-0602-10
012-0602-20
Assy, Wallplate, 10 Base-T, 1 Gang, 1 Port 650-0508-00
Assy, Wallplate, 10 Base-T, 2 Gang, 2 Port 650-0509-00
Assy, Wallplate, 10 Base-T, 2 Gang, 1 Port 650-0510-00
Assy, Wallplate, 10 Base-T, 1 Gang, 2 Port 650-0511-00
Assy, Wallplate, 10 Base-T, 2 Gang, 4 Port 650-0512-00
RS-232 Cables
Null Modem Adapter, 9-pin, male to female 131-1588-00
RS-232 Null Modem Cable, 9-pin 012-0104-01
RS-232 Cable, 9-pin, male to male 012-0395-00
RS-232 Cable, 9-pin, male to female 012-0600-00
Video and Display Cables
Cable Assy, 3 BNC (RGB), To DB15 Female, 10 Feet 012-0372-00
Cable Assy, 4 BNC (RGB) To DB15 Male, 12 Feet 175-0764-00
Cable Assy, 5 BNC (RGB), To DB15 Male, 6 Feet 012-0584-00
Cable Assy, RGB Video, 75 Ohm, 25 Feet
................................................................................................
Cable Assy, RGB Video, 75 Ohm, 50 Feet
................................................................................................
Cable Assy, RGB Video, 75 Ohm, 75 Feet
................................................................................................
Cable Assy, RGB Video, 75 Ohm, 100 Feet
..............................................................................................
012-0159-00
012-0159-01
012-0159-02
012-0159-03
Splitter/Amplifier, VGA with 4 outputs, 110V-240V - Has one 15M input
and four 15F outputs. May be used
to drive one source display and 3 repeater displays up to 250 feet.
010-1156-00
Splitter, VGA Video - 2 Channel - Has one 15M input and two 15F
outputs. May be used to drive one source
display and one repeater display up to 250 feet.
AMS-54-8313
Splitter, VGA Video - 4 Channel - Has one 15M input and four 15F
outputs. May be used to drive one source
display and 3 repeater displays up to 150 feet.
AMS-54-8314
Splitter, VGA Video, 8 Channel -May be used to drive one source
display and 7 repeater displays up to 250
feet.
AMS-54-8315
Cable Assy, VGA, DB15 Male To DB15 Male, 6 Feet 012-0593-00
Cable, VGA Extender, 15M to 15F, 6 ft - non-plenum. 012-0597-00
Cable, VGA Extender, 15M to 15F, 50 ft, non-plenum. AMS-52-8022
Cable, VGA Extender, Plenum, 15M to 15F, 50 feet. AMS-52-8215
Cable, VGA Extender, Plenum, 15M to 15F, 150 feet. Requires the use of
splitter amplifier. AMS-52-8216
Cable, VGA Extender, Plenum, 15M to 15F, 100 feet. AMS-52-8218
Cable, VGA Extender, 15M to 15F, 100 ft - non-plenum. AMS-52-8026
Cable, VGA Extender, 15M to 15F, 150 ft - non-plenum. Requires the use
of splitter amplifier. AMS-52-8027
Cable, VGA Extender, 15M to 15F, 250 ft - non-plenum. Requires the use
of splitter amplifier. AMS-54-8327
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
Cable, VGA Extender, Plenum, 15M to 15F, 250 ft - non-plenum. Requires
the use of splitter amplifier. AMS-52-8217
SDLC CABLES, PARTS, AND COMPONENTS
SDLC CABLES
Cable Assy, 9 pin to 26 pin, Brick/Bucket To Scout or 1030/1050, 2 Ft
..................................................
Cable Assy, 9 pin to 26 pin, Brick/Bucket To Scout or 1030/1050, 4 Ft
..................................................
Cable Assy, 9 pin to 26 pin, Brick/Bucket To Scout or 1030/1050, 8 Ft
..................................................
Cable Assy, 9 pin to 26 pin, Brick/Bucket To Scout or 1030/1050, 10 Ft
................................................
012-0532-02
012-0532-04
012-0532-08
012-0532-10
Cable Assy, 26 Pin To 26 Pin W/O Power, Monitor To Bucket, 2 Ft
........................................................
Cable Assy, 26 Pin To 26 Pin W/O Power, Monitor To Bucket, 4 Ft
........................................................
Cable Assy, 26 Pin To 26 Pin W/O Power, Monitor To Bucket, 8 Ft
........................................................
Cable Assy, 26 Pin To 26 Pin W/O Power, Monitor To Bucket, 10 Ft
......................................................
012-0391-02
012-0391-04
012-0391-08
012-0391-10
Cable Assy, SDLC, Powered, 15 Pin with Ferrite, w/power, 10 Ft
........................................................
Cable Assy, SDLC, Powered, 15 Pin with Ferrite, w/power, 1 Ft
..........................................................
Cable Assy, SDLC, Powered, 15 Pin with Ferrite, w/power, 2 Ft
..........................................................
Cable Assy, SDLC, Powered, 15 Pin with Ferrite, w/power, 4 Ft
..........................................................
175-0795-00
175-0795-10
175-0795-20
175-0795-40
Cable Assy, External SDLC, 9 Pin to 9 pin (AUI type cable), 4 Ft
...........................................................
Cable Assy, External SDLC, 9 Pin to 9 pin (AUI type cable), 8 Ft
...........................................................
Cable Assy, External SDLC, 9 Pin to 9 pin (AUI type cable), 12 Ft
.........................................................
NOTE: AUI-type SDLC Cables should only be used to replace a cable of
the same part number. AUI
cables are not authorized for use in new installations.
308223-004
308223-008
308223-012
Std. 26-26 pin SDLC cable w ith power, 1' (For use with UCW systems --
passes power to daisychained
90485 module housings from 90486 power supply).
012-0392-00
Std. 26-26 pin SDLC w / power, 1’ (For use with UV1700 systems --
passes power from 119-0251-00
Ault power supply to 90499 module housings).
012-0601-00
Short SDLC jumper used on back of 90479 Telemetry Module Housing
(Cable Assy, External, SDLC, 9
Pin, Short )
012-0187-00
Cable Assy, 90303B, 9-Pin To 15-Pin, SDLC (for using the old 90431
Module Housing with the PC1). 012-0149-00
SDLC Adapters
Cable Assy, Adapter, DB15 - DB9 W/O Power 012-0156-00
Cable Assy, Adapter, DB26 HD Female - DB15 Male 012-0390-00
SDLC Adapter - 26 pin male to 9 pin male, w/o power (CABLE ASSY, DB-26
HD MALE / DB-9 MALE 012-0398-00
SDLC T-Cables
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
Cable, Powered Flexport, 90491 - has 26-pin male to power block with
two 9-pin female connectors 012-0555-00
Cable Assy, SDLC, 90518, 26 To 9 Pin Tee - has 26-pin male at long end
with one 9-pin female
connector for terminator and one 9-pin male connector. Use with
terminator 012-0507-01.
012-1116-00
Cable Assembly, SDLC, Flexport - has 9-pin male at long end with two
9-pin female connectors 012-0152-00
Cable Assy, SDLC, 90513 / 90514, 9 Pin Tee - has two 9-pin male
connectors with one 9-pin female for
terminator (replaces 012-0175-00).
012-0175-01
Cable Assy, D15 - D15 - D9, SDLC, with power - has 15-pin male with
one 15-pin female connector
(for 15-pin terminator) and one 9-pin female connector
012-0191-00
SDLC TERMINATORS
SDLC Terminator Plug, 9-Pin Male ( NOTE: if already using this
terminator satisfactorily, replace using
this part number. If presently using this terminator and having SDLC
performance problems, replace with
the 012-0507-01 terminator, below)
308238-001
SDLC Terminator - 9-Pin Male (100/100 ohm) 012-0507-01
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers.
REM DESCRIPTION PART NUMBER
SDLC Terminator Plug Assy, 9-pin 650-0165-00
SDLC Terminator - 15-Pin Male 650-0089-00
SDLC Terminator - 26 Pin (used with UCW / RDI with Rev E or lower CPU)
131-1233-00
SDLC Terminator - 26-Pin - New Terminator For Use With 90309 Monitor
And 90499 Module Housing 131-1734-00
Legal Disclaimer: Any offer to purchase parts is subject to acceptance
by Spacelabs in its sole discretion. The Quick Reference
List may be modified at any time without notice. Parts shall be sold
subject to availability and under the then current Spacelabs
terms of sale at the prices established from time to time by the
Company. The publication of this Quick Reference List is not an
authorization for any party to provide service for Spacelabs products;
such service should be provided only by Spacelabs'
authorized service providers. |
|
|
SPACELABS MEDICAL UCW MODEL
REPAIR/EXCHANGE more info
SPACELABS MEDICAL COMMAND MODULES
REPAIR/EXCHANGE more info
SPACELABS MEDICAL ULTRAVIEW 1030-MODEL
90367 and 1050-MODEL 90369 REPAIR/EXCHANGE
more info
SPACELABS MEDICAL TELEMETRY
REPAIR/EXCHANGE/SALE more info
SPACELABS MEDICAL LEGACY PC1,PC2,
PS SCOUT, PC EXPRESS REPAIR/EXCHANGE
more info
SPACELABS MEDICAL FLAT PANEL DISPLAYS
FLAT RATE PRICING ON 91415A more info
SPACELABS MEDICAL EQUIPMENT SALES LIST
more info
Site Map
|
|
| |
|
|
